Download Initialization Parameters Technical Bulletin

Initialization Parameters Technical Bulletin
Parameter with Defaults
(Cont.)
Purpose/Description
27
Modification Method
[Metasys] Section (Cont.)
DefaultPatternMulti2Color=-1 0 0 Static
DefaultBackgroundMulti2Color=-1 0 0
DefaultLineMulti3Color=-1 0 0
Static
Static
DefaultPatternMulti3Color=-1 0 0 Static
DefaultBackgroundMulti3Color=-1 0 0
DefaultLineMulti4Color=-1 0 0
Static
Static
DefaultPatternMulti4Color=-1 0 0 Static
DefaultBackgroundMulti4Color=-1 0 0
Static
DEFAULT_ACTION=0
Specifies whether the Action dialog box or
Object Focus window is displayed when you
double-click on an object. The default is Object
Focus Window. Options are:
0 = Object Focus
1 = Action dialog box
OPEN_WINDOWS=1
Specifies the size and location of open
windows. Choice 2 is currently unavailable on
the dialog box due to compatibility problems
with other Windows system features. Options
are:
1 = full screen
2 = cascaded
3 = default windows mode
The default is full screen.
CLOSE_PREVIOUS=1
Specifies whether the window you are viewing
closes when you penetrate to another window.
The window closes by default. Options are:
0 = disabled
1 = enabled (closes window)
SystemDisplayMode=text
Determines whether a system displayed
automatically on a critical COS is shown as a
graphic or text. Options are:
•
text
•
graphic
The default is text.
FNHwdInterrupt=5
Specifies the FireNet interrupt setting. This
number must match the ARCNET FireNet
OWS card setting. The default is 5.
FNChanAUseLowThresh=0
Specifies the threshold setting for FireNet
Channel A. The default is High. Options are:
0=High 1=Low
FNChanBUseLowThresh=0
Specifies the threshold setting for FireNet
Channel B. The default is High. Options are:
0=High 1=Low
Continued on next page . . .
These parameters can be
set using the PC User
Options in the Setup menu.
These parameters do not
appear in the
METASYS.INI file unless
the default options have
been changed.
This parameter can be set
using the Action-View
System dialog box on the
Critical summary. This
parameter does not appear
in the METASYS.INI file
unless the default options
have been changed.
These parameters are
added automatically when
you load FireNet OWS
software.