Download Initialization Parameters Technical Bulletin

28
Initialization Parameters Technical Bulletin
Parameter with Defaults
(Cont.)
Purpose/Description
Modification Method
[Metasys] Section (Cont.)
FNStyle7=0
Specifies whether FireNet Style 7 wiring is
used. If not, Style 4 is used. The default is No.
Options are:
0=No
1=Yes
AllowBlockAck=0
Specifies whether Fire Alarm Block
Acknowledge is used. The default is No.
Options are:
0=No
1=Yes
Note:
U.S. fire systems can use Block
Acknowledge for normal, daily operation within
a Local Fire Alarm System. Block
Acknowledge cannot be used for normal, daily
operation within a Proprietary Signaling
System; it can only be used for maintenance or
commissioning purposes. Refer to the
Operator Workstation User’s Manual for details
on the Block Acknowledge mode. For
information on other countries, check with the
Authority Having Jurisdiction (AHJ).
ULFireRemindMinutes=30
Specifies the time the Fire System Reminder
box waits before moving in front of all windows.
The default is 30.
HideStartBar=0
Specifies whether the Taskbar and Start button
on the Windows main screen are hidden.
When the Taskbar and Start button are
hidden, the user can continually monitor the
Fire OWS system. The default is 0.
Options are:
1=Hidden
0=Not Hidden
This parameter is
automatically set to 1
during Fire OWS
installation and should
remain at 1 during normal
operation.
This function is available
only on Windows 98
Second Edition (SE)
workstation.
ULFireWatchdogPort=888
Added manually on the FIREOWS-PC-02
only, for use with Metasys PMI Release 9.01
or later software with PMI patches and
Fire OWS Release 9.03 or later.
This parameter is added in
the event of a complete
software reload.
Continued on next page . . .
These parameters are
added automatically when
you load FireNet OWS
software.