Download NuTiny-SDK-NUC442 User Manual

NuTiny-SDK-NUC442 User Manual
ARM Cortex® -M4
32-BIT MICROCONTROLLER
NuTiny-SDK-NUC442 User Manual
for NuMicro™ NUC442 Series
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro™ microcontroller based system design.
Nuvoton assumes no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
May 09, 2014
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
Table of Contents
1
Overview ........................................................................................... 3
2
Introduction to NuTiny-SDK-NUC442 .................................................... 3
2.1
2.2
2.3
Starting to Use NuTiny-SDK-NUC442 on the Keil μVision® IDE ............... 11
3
3.1
3.2
3.3
3.4
4
Downloading and Installing Keil μVision® IDE Software ................................. 11
Downloading and Installing Nuvoton Nu-Link Driver ..................................... 11
Hardware Setup ....................................................................................... 11
Example Program..................................................................................... 12
Starting to Use NuTiny-SDK-NUC442 on the IAR Embedded Workbench .. 13
4.1
4.2
4.3
4.4
5
Downloading and Installing IAR Embedded Workbench Software .................... 13
Downloading and Installing Nuvoton Nu-Link Driver ..................................... 13
Hardware Setup ....................................................................................... 13
Example Program..................................................................................... 14
NuTiny-SDK-NUC442 Schematics ....................................................... 15
5.1
5.2
6
NuTiny-EVB-NUC442 Schematic ................................................................. 15
Nu-Link-Me Schematic .............................................................................. 20
Downloading NuMicro™ Related Files from Nuvoton Website .................. 21
6.1
6.2
6.3
7
NuTiny-SDK-NUC442 System Description ......................................................5
Pin Assignment for Extended Connectors ......................................................7
NuTiny-SDK-NUC442 PCB Placement .......................................................... 10
Downloading NuMicro™ Keil μVision® IDE Driver .......................................... 21
Downloading NuMicro™ IAR EWARM Driver ................................................. 23
Downloading NuMicro™ NUC442 Series BSP Software Library ........................ 25
Revision History ............................................................................... 26
May 09, 2014
2 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
1 Overview
The NuTiny-SDK-NUC442 is a specific development tool for NuMicro™ NUC442
Series. User can use NuTiny-SDK-NUC442 to develop and verify the application
program easily. The NuTiny-SDK-NUC442 includes two parts: NuTiny-EVB-NUC442
and Nu-Link-Me. The NuTiny-EVB-NUC442 is the evaluation board and Nu-Link-Me is
its Debug Adaptor. Therefore, user does not need other additional ICE or debug
equipment.
2 Introduction to NuTiny-SDK-NUC442
The NuTiny-SDK-NUC442 uses the NUC442JI8AE as the target microcontroller. Figure
2-1 shows the NuTiny-SDK-NUC442 for NUC442 Series, in which the left portion is
called NuTiny-EVB-NUC442 and the right portion is called Nu-Link-Me.
The NuTiny-EVB-NUC442 is similar to other development boards. User can use it to
develop and verify applications to emulate the real behavior. The on-board chip covers
NUC442 Series features. The NuTiny-EVB-NUC442 can be a real system controller to
design users’ target systems.
The Nu-Link-Me is a Debug Adaptor, which connects your PC's USB port to your target
system (via Serial Wired Debug port) and allows you to program and debug embedded
programs on the target hardware. To use the Nu-Link-Me Debug Adaptor with IAR or
Keil, please refer to the “Nuvoton NuMicro™ IAR ICE Driver User Manual“ or “Nuvoton
NuMicro™ Keil ICE Driver User Manual” for details. The two documents will be stored in
the local hard disk when each driver is installed.
May 09, 2014
3 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
LQFP-144 pin
Extended Connector
(J2, J3)
VCC33
(JP3)
VDD5V
(JP4)
USB OTG
Connector
(CON2)
Power LED
IO LED (PB.10)
ICE Controller
USB Connector
(ICEJ1)
Target Chip
GND (JP6)
LQFP-144 pin
Extended Connector
(J1, J4)
ICE
Reset Key
(SW1) Controller
VCC:3.3V or 5V
(JP1)
Figure 2-1 NuTiny-SDK-NUC442 (Blue PCB Board)
May 09, 2014
4 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
2.1
NuTiny-SDK-NUC442 System Description
2.1.1 Power Settings
 ICEJ1: USB port in Nu-Link-Me
 CON2: Micro USB port in NuTiny-EVB-NUC442
 JP4/JP14: VDD5V voltage connector in NuTiny-EVB-NUC442
JP4/JP14
VDD5V
DC 5V
Output
POWER
Mode
ICEJ1
USB Port (Mini)
CON2
USB Port (Micro)
MCU
Voltage
Mode 1
Connected to PC
X
Mode 2
X
Connect to PC
(USB port is device)
DC 5V
Output
DC 3.3 V
Mode 3
X
Connect to PC
(USB port is host)
DC 5V
Input
DC 3.3V
DC 3.3 V
Comment
ICEJ1 (from PC) supplies
the power.
CON2 (from PC) supplies
the power when TP10 is
wired to JP4 or JP14.
JP4 or JP14 supplies the
power.
X: Unused.
2.1.2 Debug Connectors
 JP11: The connector in the target board (NuTiny-EVB-NUC442) for connecting
with Nuvoton ICE adaptor (Nu-Link, Nu-Link-Pro or Nu-Link-Me)
 ICEJP2: The connector in the ICE adaptor (Nu-Link-Me) for connecting with a
target board (e.g. NuTiny-EVB-NUC442)
2.1.3 USB Connector
 ICEJ1: Mini USB connector in Nu-Link-Me connected to a PC USB port
2.1.4 USB OTG Host/Device Connector
 CON2: Micro USB connector in NuTiny-EVB-NUC442 for application use
2.1.5 Extended Connectors
 J1, J2, J3 and J4: Show all chip pins in NuTiny-EVB-NUC442
2.1.6 Reset Buttons
 SW1: Reset button in NuTiny-EVB-NUC442. Press this key to reset the target chip
NUC442JI8AE.
May 09, 2014
5 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
2.1.7 Power Connectors
 JP3: VCC33 connector in NuTiny-EVB-NUC442 to supply the 3.3V voltage input
to target board
 JP10: An option to select whether the 3.3V voltage input supplied by the ICE
bridge (default)
 VBAT: The VBAT connector in NuTiny-EVB-NUC442 to supply an extra battery
power. The default is shorted with VCC33.
 JP4/JP14: VDD5V connector in NuTiny-EVB-NUC442 to supply 5V voltage input
from an extra power supplier.
 JP6: GND connector in NuTiny-EVB-NUC442
May 09, 2014
6 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
2.2
Pin Assignment for Extended Connectors
The NuTiny-EVB-NUC442 provides the NUC442JI8AE target chip on board and the
extended connectors (JP1, JP2, JP3 and JP4) for LQFP 144-pin.
No
Pin Name
No
Pin Name
PD.3/EBI_A7/JTAG_TDO/CAP_DATA0/SD0_CDn/
ACMP2_O/I2C3_SDA/SC5_CLK/
PD.4/EBI_A8/JTAG_TDI/CAP_SCLK/ACMP1_O/
UART3_RXD/SC5_CD/
PD.5/EBI_A9/JTAG_nTRST/CAP_VSYNC/
UART3_TXD/SC5_RST/
PD.6/EBI_A10/CAP_HSYNC/SD0_CMD/
UART3_RTS/SC5_PWR/
PD.7/EBI_A11/CAP_PIXCLK/SD0_CLK/
UART3_CTS/SC5_DAT/
1
PE.12/EBI_nCS1/ACMP2_P2/ACMP1_P3/ADC1_4
24
2
PE.13/EBI_nCS2/ACMP2_P1/ADC1_5/
25
3
PE.14/EBI_nCS3/ACMP2_P0/ADC1_6/
26
4
PE.15/ACMP2_N/ADC1_7/
27
5
PF.9/PWM0_0/OPA0_IN+/
28
6
PF.10/PWM0_1/OPA0_IN-/
29
PG.13/XT1_IN/
7
PF.11/UART1_RTS/OPA0_O/
30
PG.12/XT1_OUT/
8
PF.12/UART1_CTS/OPA1_IN+/
31
nRESET
9
PF.13/UART1_TXD/OPA1_IN-/
32
LDO_CAP
10
PF.14/UART1_RXD/OPA1_O/
33
VSS
11
VSS
34
VDD
12
VDD
35
PG.10/JTAG_TCK/ICE_CLK/
13
PF.15/UART0_RTS/
36
PG.11/JTAG_TMS/ICE_DAT/
14
PG.0/INT6/UART0_CTS/
37
PG.15/X32K_IN/I2C1_SCL
15
PG.1/UART0_RXD/
38
PG.14/X32K_OUT/I2C1_SDA
16
PG.2/UART0_TXD/
39
VBAT
40
PA.0/TAMPER0/SC0_CD/CAN1_RXD/INT0
41
PA.1/TAMPER1/SC5_CD/CAN1_TXD/EBI_A22
42
PD.8/SPI3_MISO1/I2C0_SCL
43
PD.9/SPI3_MOSI1/I2C0_SDA
17
18
19
20
21
22
23
PC.12/EBI_A0/CAP_DATA7/SD1_CDn/SC4_CD/
SPI1_SS0/
PC.13/EBI_A1/CAP_DATA6/SD1_CMD/SC4_RST/
SPI1_MOSI1/
PC.14/EBI_A2/CAP_DATA5/SD1_CLK/TM3_EXT/
SC4_PWR/SPI1_MISO1/
PC.15/EBI_A3/CAP_DATA4/SD1_DAT3/
PD.0/INT3/EBI_A4/CAP_DATA3/SD1_DAT2/
SC4_CLK/SPI1_MISO0/
PD.1/EBI_A5/CAP_DATA2/SD1_DAT1/
TM0_CNT_OUT/SPI1_CLK/
PD.2/EBI_A6/CAP_DATA1/SD1_DAT0/I2C3_SCL/
STADC/
May 09, 2014
44
45
46
7 of 26
PA.2/SC2_DAT/SPI3_MISO0/I2S0_MCLK/
BRAKE11/CAP_SFIELD/EBI_A12
PA.3/SC2_CLK/SPI3_MOSI0/I2S0_DO/BRAKE10/
EBI_A13
PA.4/SC2_PWR/SPI3_CLK/I2S0_DI/QEI1_Z/
EBI_A14/ECAP1_IC2
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
47
48
PA.5/SC2_RST/SPI3_SS0/I2S0_BCLK/PWM0_0/
QEI1_B/EBI_A15/ECAP1_IC1
PA.6/SC2_CD/I2S0_LRCK/PWM0_1/QEI1_A/
CAN1_TXD/EBI_A16/ECAP1_IC0
73
PD.13/SPI1_SS0/UART5_CTS/ECAP0_IC2
74
PD.14/SPI1_CLK/UART5_RTS/ECAP0_IC1
49
PG.3/PS2_CLK/I2S1_DO/SC1_RST
75
PD.15/SPI1_MISO0/UART5_TXD/ECAP0_IC0
50
PG.4/PS2_DAT/I2S1_DI/SC1_PWR
76
PF.0/SPI1_MOSI0/UART5_RXD/INT5
51
PG.5/I2S1_BCLK/SC1_DAT
77
VRES
52
PG.6/I2S1_LRCK/SC1_CLK
78
VBUS
53
VDD
79
USB_VDD33_CAP
54
VSS
80
VSSA
81
USB0_D-
82
USB0_D+
83
USB0_OTG_ID
84
PB.0/USB0_OTG5V_ST/I2C4_SCL/INT1
85
PB.1/USB0_OTG5V_EN/I2C4_SDA/
TM1_CNT_OUT
86
PG.7/SPI2_MISO0/I2S1_MCLK/SC1_CD/SC3_RST
55
56
57
58
59
60
PA.7/SC0_CLK/SPI3_SS0/PWM1_3/EPWM0_5/
EBI_A17
PA.8/SC0_RST/SPI3_CLK/PWM1_2/EPWM0_4/
EBI_A18
PA.9/SC0_PWR/SPI3_MISO0/PWM1_1/
EPWM0_3/EBI_A19
PA.10/SC0_DAT/SPI3_MOSI0/PWM1_0/
EPWM0_2/EBI_A20
PA.11/UART0_RTS/SPI3_MISO1/PWM0_5/
EPWM0_1/EBI_AD0
PA.12/UART0_CTS/SPI3_MOSI1/PWM0_4/
EPWM0_0/EBI_AD1
61
PA.13/UART0_RXD/SC3_DAT/PWM1_4/EBI_AD2
87
PG.8/SPI2_MOSI0/I2S1_DO/UART4_RTS/
SC3_DAT
62
PA.14/UART0_TXD/SC3_CLK/PWM1_5/EBI_AD3
88
PG.9/SPI2_CLK/I2S1_DI/UART4_CTS/SC3_CLK
63
PD.10/SC3_DAT/I2C4_SCL
89
PB.2/UART1_RXD/SPI2_SS0/USB1_D-/EBI_AD4
64
PD.11/SC3_RST/TM3_CNT_OUT
90
PB.3/UART1_TXD/SPI2_CLK/USB1_D+/EBI_AD5
65
PD.12/SC3_CLK/I2C4_SDA
91
66
PA.15/SC3_PWR/UART2_RTS/I2C0_SCL/EBI_A21
92
67
68
69
PC.9/STADC/UART2_CTS/SC3_RST/I2C0_SDA/
CAP_DATA1/I2C3_SCL/EBI_A22/SD1_DAT0/EBI_
A6
PC.10/SC3_CD/UART2_RXD/PWM0_2/EBI_A23/
EBI_AD2
PC.11/UART2_TXD/UART2_TXD/PWM0_3/
EBI_A24/EBI_AD3
PB.4/UART1_RTS/SPI2_MISO0/UART4_RXD/
TM0_CNT_OUT/EBI_AD6
PB.5/UART1_CTS/SPI2_MOSI0/UART4_TXD/
EBI_AD7
93
PB.6/I2C2_SCL/BRAKE01/UART4_RTS/PWM1_4/
EPWM1_0/EBI_AD8
94
PB.7/I2C2_SDA/BRAKE00/UART4_CTS/PWM1_5/
EPWM1_1/EBI_AD9
95
PB.8/UART5_CTS/EPWM1_2/EBI_AD10
70
LDO_CAP
96
PB.9/UART5_RTS/EPWM1_3/EBI_AD11
71
VSS
97
PB.10/UART5_TXD/EPWM1_4/EBI_AD12
72
VDD
98
PB.11/UART5_RXD/EPWM1_5/EBI_AD13
May 09, 2014
8 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
99
PH.0/I2C1_SCL/UART4_RXD/CAN1_RXD/INT7
122
VDD
100
PH.1/UART4_TXD/I2C1_SDA/CAN1_TXD
123
PF.6/SD0_CDn/UART2_RXD/
124
PF.7/SD0_CMD/UART2_TXD/
125
PF.8/SD0_CLK/UART2_RTS/
101
102
PB.12/UART4_RTS/SPI2_MISO1/CAN0_RXD/
EBI_AD14
PB.13/UART4_CTS/SPI2_MOSI1/CAN0_TXD/
EBI_AD15
103
PB.14/I2S1_MCLK/SC1_RST/BRAKE01
126
PH.2/UART2_CTS/
104
PB.15/I2S1_DO/SC1_DAT/BRAKE00
127
LDO_CAP
105
VDD
128
VSS
106
VSS
129
VDD
107
LDO_CAP
130
PE.0/INT4/ADC0_0/
131
PE.1/TM2_CNT_OUT/ADC0_1/
132
PE.2/SPI0_MISO0/ACMP0_O/ADC0_2/
133
PE.3/SPI0_MOSI0/ACMP0_P3/ADC0_3/
134
PE.4/SPI0_SS0/ACMP0_P2/ADC0_4/
135
PE.5/SD0_CDn/SPI0_CLK/ACMP0_P1/ADC0_5/
108
109
110
111
112
PC.0/I2S1_DI/SC1_DAT/UART4_RXD/EBI_MCLK/
INT2
PC.1/EBI_AD13/TM3_CNT_OUT/UART4_TXD/
SC1_CLK/I2S1_BCLK/
PC.2/EBI_AD12/SPI0_SS0/UART4_RTS/
SC1_PWR/I2S1_LRCK/
PC.3/ECAP0_IC2/EBI_AD11/QEI0_Z/SPI0_MISO1/
UART4_CTS/SC1_CD/I2S1_MCLK/
PC.4/ECAP0_IC1/EBI_AD10/QEI0_B/SPI0_MOSI1/
SC1_RST/I2S1_DO/
PE.6/EBI_nWR/SD0_CMD/SPI0_MISO0/
ACMP0_P0/ADC0_6/
PE.7/EBI_nRD/SD0_CLK/SPI0_MOSI0/
ACMP0_N/ADC0_7/
113
PC.5/ECAP0_IC0/EBI_MCLK/QEI0_A/CLKO/
136
114
PC.6/EBI_AD9/TM2_CNT_OUT/SPI0_MISO0/
TM2_EXT/
137
115
PC.7/EBI_AD8/SPI0_MOSI0/TM1_EXT/
138
AVSS
116
PC.8/SPI0_CLK/TM0_EXT/
139
Vref
117
PF.2/SD0_DAT3/SPI3_SS0/
140
AVDD
118
PF.3/SD0_DAT2/SPI3_CLK/
141
119
PF.4/SD0_DAT1/SPI3_MISO0/
142
120
PF.5/SD0_DAT0/SPI3_MOSI0/
143
121
VSS
144
PE.8/EBI_ALE/SD0_DAT3/TM1_CNT_OUT/
ACMP1_N/ADC0_8/ADC1_0/
PE.9/EBI_nWRH/SD0_DAT2/ACMP1_P0/ADC0_9/
ADC1_1/
PE.10/EBI_nWRL/SPI0_MISO1/ACMP1_P1/
ADC0_10/ADC1_2/
PE.11/EBI_nCS0/ACMP2_P3/SD0_DAT0/
SPI0_MOSI1/ACMP1_P2/ADC0_11/ADC1_3/
Table 2-1 NUC442JI8AE LQFP 144-pin Assignment for Extended Connectors
May 09, 2014
9 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
2.3
NuTiny-SDK-NUC442 PCB Placement
The following figure shows the NuTiny-SDK-NUC442 PCB placement.
Figure 2-2 NuTiny-SDK-NUC442 PCB Placement
May 09, 2014
10 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
3 Starting to Use NuTiny-SDK-NUC442 on the Keil μVision® IDE
3.1
Downloading and Installing Keil μVision® IDE Software
Please connect to the Keil company website (http://www.keil.com) to download the
Keil μVision® IDE and install the RVMDK.
3.2
Downloading and Installing Nuvoton Nu-Link Driver
Please connect to Nuvoton NuMicro™ website (http://www.nuvoton.com/NuMicro) to
download the “NuMicro™ Keil μVision® IDE driver” file. Please refer to section 6.1 for
the detailed download flow. After the Nu-Link driver is downloaded, please unzip the
file and execute the “Nu-Link_Keil_Driver.exe” to install the driver.
3.3
Hardware Setup
The hardware setup is shown in the following figure.
Figure 3-1 NuTiny-SDK-NUC442 Hardware Setup
May 09, 2014
11 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
3.4
Example Program
This example, as shown in the directory in Figure 3 2, demonstrates downloading and
debugging an application on a NuTiny-SDK-NUC442 board. The example file can be
downloaded from Nuvoton NuMicro™ website as described in section 6.3.
Directory
Project File
Figure 3-2 Example Directory
To use the example:
The I/O LED on the NuTiny-EVB-NUC442 board will be toggled on.




Start μVision®
Project – Open
Open the led.uvproj project file

Start Debug mode
When using the debugger commands, you
may:

Review variables in the watch
window

Single step through code

Reset the device

Run the application
Project – Build
Compile and link the LED application
Flash – Download
Program the application code into on-chip
Flash ROM
May 09, 2014
12 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
4 Starting to Use NuTiny-SDK-NUC442 on the IAR Embedded
Workbench
4.1
Downloading and Installing IAR Embedded Workbench Software
Please connect to IAR company website (http://www.iar.com) to download the IAR
Embedded Workbench and install the EWARM.
4.2
Downloading and Installing Nuvoton Nu-Link Driver
Please
connect
to
Nuvoton
Company
NuMicro™
website
(http://www.nuvoton.com/NuMicro) to download “NuMicro™ IAR EWARM Driver” file.
Please refer to section 6.2 for the detail download flow. After the Nu-Link driver is
downloaded, please unzip the file and execute the “Nu-Link_IAR_Driver.exe” to install
the driver.
4.3
Hardware Setup
The hardware setup is shown in the following figure.
Figure 4-1 NuTiny- SDK-NUC442 Hardware Setup
May 09, 2014
13 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
4.4
Example Program
This example, as shown in the directory in Figure 4-2, demonstrates downloading and
debugging an application on a NuTiny-SDK-NUC442 board. The example file can be
downloaded from Nuvoton NuMicro™ website as described in section 6.3.
Directory
Project File
Figure 4-2 Example Directory
To use the example:
The I/O LED on the NuTiny-EVB-NUC442 board will be toggled on.



Start IAR Embedded Workbench
File-Open-Workspace
Open the led.eww workspace file
Project - Make
Compile and link the LED application
May 09, 2014

Project – Download and Debug
Program the application code into on-chip
Flash ROM

Single step through code

Reset the device

Run the application
14 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
5 NuTiny-SDK-NUC442 Schematics
5.1
NuTiny-EVB-NUC442 Schematic
VCC33
CT2
USB_VDD33_CAP
USB_VBUS
USB_VRES
PIN88
PIN87
PIN86
PIN85
PIN84
PIN83
PIN82
PIN81
PIN80
PIN79
PIN78
PIN77
PIN76
PIN75
PIN74
PIN73
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
I2S1_DI/SPI2_CLK/nCTS4/SC3_CLK/PG_9
I2S1_DO/SPI2_MOSI0/nRTS4/SC3_DAT/PG_8
SC1_CD/I2S1_MCLK/SPI2_MISO0/SC3_RST/PG_7
I2C4_SDA/USB0_OTG5V_EN/PB_1
INT1/I2C4_SCL/USB0_OTG5V_ST/PB_0
USB0_OTG_ID
USB0_D+
USB0_DVSSA
USB_VDD33_CAP
VBUS
VRES
INT5/RXD5/SPI1_MOSI0/PF_0
TXD5/SPI1_MISO0/PD_15
nRTS5/SPI1_CLK/PD_14
nCTS5/SPI1_SS0/PD_13
PIN108
PIN107
PIN106 GND
PIN105
PIN104
PIN103
PIN102
PIN101
PIN100
PIN99
PIN98
PB_11
PIN97
PB_10
PIN96
PIN95
PIN94
PIN93
PIN92
PIN91
PIN90
PIN89
USB_VBUS
USB_ID
USB_D+
USB_D-
PB_1(OTG_5V_EN) to control the NCT3520U powe switch
PB_0(OTG_5V_ST) to checkk the over current status
EBI_AD3/PWMB5/SC3_CLK/TXD0/PA_14
EBI_AD2/PWMB4/SC3_DAT/RXD0/PA_13
EBI_AD1/PWMA4/SPI3_MOSI1/nCTS0/PA_12
EBI_AD0/PWMA5/SPI3_MISO1/nRTS0/PA_11
EBI_A20/PWMB0/SPI3_MOSI0/SC0_DAT/PA_10
EBI_A19/PWMB1/SPI3_MISO0/SC0_PWR/PA_9
EBI_A18/PWMB2/SPI3_CLK/SC0_RST/PA_8
EBI_A17/PWMB3/SPI3_SS0/SC0_CLK/PA_7
VSS
VDD
SC1_CLK/I2S1_LRCLK/PG_6
SC1_DAT/I2S1_BCLK/PG_5
SC1_PWR/I2S1_DI/PS2_DAT/PG_4
SC1_RST/I2S1_DO/PS2_CLK/PG_3
72
71
70
69
68
67
66
65
64
63
PIN72
PIN71
PIN70
PIN69
PIN68
PIN67
PIN66
PIN65
PIN64
PIN63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
PIN62
PIN61
PIN60
PIN59
PIN58
PIN57
PIN56
PIN55
PIN54
PIN53
PIN52
PIN51
PIN50
PIN49
48
47
46
45
44
43
42
PIN48
PIN47
PIN46
PIN45
PIN44
PIN43
PIN42
Off-page Connector
XT1_OUT
XT1_IN
CT6
1uF/16V
TANT-A
CB8
0.1u
C0603
XT32_OUT
XT32_IN
VCC33
CB15
0.1u
C0603
Off-page Connector
XT1_OUT
TICECLK
XT32_OUT
TICERST
XT32_IN
TXD0
RXD0
ICE
Off-page Connector
ICE_USBVBUS
VCC33
VCC33
GND
VCC33
RESET
RXD0
Off-page Connector
CB10
0.1u
C0603
ICE_CLK
TXD0
Crystal
VDD5V
ICE_DAT
TICEDAT
XT1_IN
PB_10
PB_10
VBAT
VBAT
VREF
VREF
GND
LED
GND
ADAVSS
AVDD
AVDD
Power
Off-page Connector
CAN1_TXD/SC5_CD/TAMPER1/PA_1
INT0/CAN1_RXD/SC0_CD/TAMPER0/PA_0
VBAT
I2C1_SDA/X32K_OUT/PG_14
I2C1_SCL/X32K_IN/PG_15
41
40
39
38
37
PIN41
PIN40
PIN39
PIN38
PIN37
VBAT
XT32_OUT
XT32_IN
VBAT
PIN[1:144]
PIN[1:144]
29
30
31
32
33
34
35
36
PG_13/XT1_IN
PG_12/XT1_OUT
RESETn
LDO_CAP
VSS
VDD
PG_10/ICE_CLK/JTAG_TCLK
PG_11/ICE_DAT/JTAG_TMS
MCU
Connector
XT1_IN
PIN29
XT1_OUT PIN30
RESET
PIN31
PIN32
PIN33
PIN34
ICE_CLK PIN35
ICE_DAT PIN36
NUC442JI8AE-LQFP144
L1
L0603
VDD
VSS
LDO_CAP
EBI_AD3/PWMA3/TXD2/PC_11
EBI_AD2/PWMA2/RXD2/SC3_CD/PC_10
EBI_A22/I2C0_SDA/nCTS2/SC3_RST/PC_9
EBI_A21/I2C0_SCL/nRTS2/SC3_PWR/PA_15
I2C4_SDA/SC3_CLK/PD_12
SC3_RST/PD_11
I2C4_SCL/SC3_DAT/PD_10
PD_3/SC5_CLK/I2C3_SDA/CMP2_O/SD0_CDn/VIDEO_D0/JTAG_TDO/EBI_A7
PD_4/SC5_CD/RXD3/CMP1_O/VIDEO_SCLK/JTAG_TDI/EBI_A8
PD_5/SC5_RST/TXD3/VIDEO_VSYNC/JTAG_RST/EBI_A9
PD_6/SC5_PWR/nRTS3/SD0_CMD/VIDEO_HSYNC/EBI_A10
PD_7/SC5_DAT/nCTS3/SD0_CLK/VIDEO_PIXCLK/EBI_A11
ADAVSS
VREF
AVDD
USB_D-
ADAVSS
LDO_CAP
VSS
VDD
PE_0/ADC0_0/INT4
PE_1/ADC0_1
PE_2/ADC0_2/SPI0_MISO0/CMP0_O
PE_3/ADC0_3/SPI0_MOSI0/CMP0_P3
PE_4/ADC0_4/SPI0_SS0/CMP0_P2
PE_5/ADC0_5/SPI0_CLK/CMP0_P1/SD0_CDn
PE_6/ADC0_6/SPI0_MISO0/CMP0_P0/SD0_CMD/EBI_nWR
PE_7/ADC0_7/SPI0_MOSI0/CMP0_N/SD0_CLK/EBI_nRD
AVSS
VREF
AVDD
PE_8/ADC0_8/ADC1_0/CMP1_N/SD0_D3/TM1/EBI_ALE
PE_9/ADC0_9/ADC1_1/CMP1_P0/SD0_D2/EBI_nWRH
PE_10/ADC0_10/ADC1_2/CMP1_P1/SD0_D1/SPI0_MISO1/EBI_nWRL
PE_11/ADC0_11/ADC1_3/CMP1_P2/SD0_D0/SPI0_MOSI1/CMP2_P3/EBI_nCS0
USB_D+
USB HOST/DEVICE
24
25
26
27
28
VREF
AVDD
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
USB_ID
PB_1
USB_VSSA
VCC33
PIN24
PIN25
PIN26
PIN27
PIN28
CB13
0.1u
C0603
PIN127
PIN128
PIN129
PIN130
PIN131
PIN132
PIN133
PIN134
PIN135
PIN136
PIN137
PIN138
PIN139
PIN140
PIN141
PIN142
PIN143
PIN144
R2
8.2K
R0603
PE_12/ADC1_4/CMP1_P3/CMP2_P2/EBI_nCS1
PE_13/ADC1_5/CMP2_P1/EBI_nCS2
PE_14/ADC1_6/CMP2_P0/EBI_nCS3
PE_15/ADC1_7/CMP2_N
PF_9/OPA0_IN+/PWMA0
PF_10/OPA0_IN-/PWMA1
PF_11/OPA0_O/nRTS1
PF_12/OPA1_IN+/nCTS1
PF_13/OPA1_IN-/TXD1
PF_14/OPA1_O/RXD1
VSS
VDD
PF_15/nRTS0
PG_0/nCTS0/INT6
PG_1/RXD0
PG_2/TXD0
PC_12/SPI1_SS0/SC4_CD/SD1_CDn/VIDEO_D7/EBI_A0/ETM_TRACE_D3
PC_13/SPI1_MOSI1/SC4_RST/SD1_CMD/VIDEO_D6/EBI_A1/ETM_TRACE_D2
PC_14/SPI1_MISO1/SC4_PWR/TM3_EXT/SD1_CLK/VIDEO_D5/EBI_A2/ETM_TRACE_D1
PC_15/SPI1_MOSI0/SC4_DAT/SD1_D3/VIDEO_D4/EBI_A3/ETM_TRACE_D0
PD_0/SPI1_MISO0/SC4_CLK/SD1_D2/VIDEO_D3/EBI_A4/INT3//ETM_TRACE_CLK
PD_1/SPI1_CLK/TM0/SD1_D1/VIDEO_D2/EBI_A5
PD_2/STADC/I2C3_SCL/SD1_D0/VIDEO_D1/EBI_A6
GND
VCC33
CT7
1uF/16V
TANT-A
USB_VRES
EBI_A16/CAN1_TXD/PWMA1/I2S0_LRCLK/SC2_CD/PA_6
EBI_A15/PWMA0/I2S0_BCLK/SPI3_SS0/SC2_RST/PA_5
EBI_A14/I2S0_DI/SPI3_CLK/SC2_PWR/PA_4
EBI_A13/I2S0_DO/SPI3_MOSI0/SC2_CLK/PA_3
EBI_A12/VIDEO_SFIELD/I2S0_MCLK/SPI3_MISO0/SC2_DAT/PA_2
I2C0_SDA/SPI3_MOSI1/PD_9
I2C0_SCL/SPI3_MISO1/PD_8
PC_1/EMC_MII_RXERR/SC1_CLK/TXD4/I2S1_BCLK/TM3/EBI_AD13
PC_2/EMC_MII_RXDV/SC1_PWR/nRTS4/I2S1_LRCLK/SPI0_SS0/EBI_AD12
PC_3/EMC_MII_RXD1/SC1_CD/nCTS4/I2S1_MCLK/SPI0_MISO1/EBI_AD11
PC_4/EMC_MII_RXD0/SC1_RST/I2S1_DO/SPI0_MOSI1/EBI_AD10
PC_5/EMC_MII_RXCLK/EBI_MCLK
PC_6/EMC_MII_TXD0/SPI0_MISO0/TM2/TM2_EXT/EBI_AD9
PC_7/EMC_MII_TXD1/SPI0_MOSI0/TM1_EXT/EBI_AD8
PC_8/EMC_MII_TXEN/SPI0_CLK/TM0_EXT
PF_2/EMC_MII_RXD3/SPI3_SS0/SD0_D3
PF_3/EMC_MII_RXD2/SPI3_CLK/SD0_D2
PF_4/EMC_MII_COL0/SPI3_MISO0/SD0_D1
PF_5/EMC_MII_CRS/SPI3_MOSI0/SD0_D0
VSS
VDD
PF_6/EMC_MII_TXCLK/RXD2/SD0_CDn
PF_7/EMC_MII_TXD3/TXD2/SD0_CMD
PF_8/EMC_MII_TXD2/nRTS2/SD0_CLK
PH_2/nCTS2
USB_VBUS
PB_0
PB_1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
CB12
0.1u
C0603
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
PB_0
PIN1
PIN2
PIN3
PIN4
PIN5
PIN6
PIN7
PIN8
PIN9
PIN10
PIN11
PIN12
PIN13
PIN14
RXD0 PIN15
TXD0 PIN16
PIN17
PIN18
PIN19
PIN20
PIN21
PIN22
PIN23
GND
VCC33
PIN109
PIN110
PIN111
PIN112
PIN113
PIN114
PIN115
PIN116
PIN117
PIN118
PIN119
PIN120
PIN121
PIN122
PIN123
PIN124
PIN125
PIN126
Off-page Connector
10uF/10V
TANT-A
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
INT2/EBI_MCLK/I2S1_DI/RXD4/SC1_DAT/EMC_PHY_CLK/PC_0
LDO_CAP
VSS
VDD
I2S1_DO/SC1_DAT/EMC_MII_MDIO/PB_15
I2S1_MCLK/SC1_RST/EMC_MII_MDC/PB_14
EBI_AD15/SPI2_MOSI1/nCTS4/CAN0_TXD/EMC_MII_MDIO/PB_13
EBI_AD14/SPI2_MISO1/nRTS4/CAN0_RXD/EMC_MII_MDC/PB_12
I2C1_SDA/TXD4/CAN1_TXD/PH_1
I2C1_SCL/RXD4/CAN1_RXD/PH_0
ETM_TRACE_CLK/EBI_AD13/RXD5/PB_11
ETM_TRACE_D0/EBI_AD12/TXD5/PB_10
ETM_TRACE_D1/EBI_AD11/nRTS5/PB_9
ETM_TRACE_D2/EBI_AD10/nCTS5/PB_8
ETM_TRACE_D3/EBI_AD9/nCTS4/PWMB5/I2C2_SDA/PB_7
EBI_AD8/nRTS4/PWMB4/I2C2_SCL/PB_6
EBI_AD7/TXD4/SPI2_MOSI0/nCTS1/PB_5
EBI_AD6/TM0/RXD4/SPI2_MISO0/nRTS1/PB_4
EBI_AD5/SPI2_CLK/TXD1/USB1_D+/PB_3
EBI_AD4/SPI2_SS0/RXD1/USB1_D-/PB_2
U-1
PB_1
PB_0
USB_ID
USB_D+
USB_DUSB_VSSA
CB1
0.1u
C0603
CT3
1uF/16V
TANT-A
VCC33
CT8
1uF/16V
TANT-A
CB16
0.1u
C0603
Title
NUC442 MCU
Size
Document Number
Custom
Date:
May 09, 2014
15 of 26
Rev
V2.2
Monday , June 09, 2014
Sheet
3
of
Rev. V1.00
3
NuTiny-SDK-NUC442 User Manual
C7
20p
R19
0
XT1_OUT
R0603
C0603
X2
12MHz
C8
20p
XTAL3-1
R20
NC
R0603
Off-page Connector
XT1_IN
GND
XT1_OUT
C0603
XT1_IN
XT32_OUT
C9
NC
C0603
XT32_OUT
R24
NC
R0603
XT32_IN
GND
X3
32.768K
XTAL-3.4MM-2P
XT1_OUT
XT1_IN
XT32_OUT
XT32_IN
GND
XT32_IN
C11
NC
C0603
CRYSTAL
VCC33
SW1
PUSH BOTTOM
R23
10K
R0603
Off-page Connector
RESET
GND
SW
RESET
VCC33
C10
1uF
C0603
GND
TICERST
VCC33
GND
RESET
May 09, 2014
16 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
Off-page Connector
USB_OC#
VDD5V
PB_0
USB_PWR_EN
ICE_USBVBUS
VCC33
PB_1
VCC33
GND
USB_VBUS
GND
USB_VBUS
USB_ID
USB_ID
USB_D+
USB_D+
USB_D-
USB_D-
VCC33
R25
4.7K
R0603
USB_OC#
TP10
NCT3520U
pin3(OC#) is
Open Drain Pin
NC
TP11 NC
TP12 NC
USB Host/Device
U5
CT15
+ 10uF/10V
TANT-A
CB22
0.1u
C0603
4
USB_PWR_EN
NCT3520U High Active
OUT
IN
GND
EN/EN#
OC#
1
1
USB_VBUS
2
3
USB_DUSB_OC#
NCT3520U
CT14
+ 33uF/6.3V
GND
VDD5V
5
TANT-A
CB21
0.1u
C0603
R28
0
R0603
USB_D+
R30
D-
2
D+
3
4
USB_ID
0
R0603
R1
5
10K
R0603
CON2
VBUS
DD+
ID
GND
Shield
Shield
Shield
Shield
6
7
8
9
USB MICRO-AB RECEP.
TP14
NC
L8
L0603
TP13 NC
USB OTG Host/Device
VCC33
VREF
L4
L0603
1
2
NC
CT9
NC
TANT-A
CB17
NC
C0603
CB18
0.1u
C0603
CT10
JP4
JP5
1
2
1
2
VBAT
JP6
GND
10uF/10V
TANT-A
CB19
0.1u
C0603
CB20
0.1u
C0603
1
2
1
2
HEADER 2X1 (NC)
ADAVSS
AVDD
VBAT
VREF
GND
ADAVSS
AVDD
POWER
VDD5V
May 09, 2014
GND
JP7
VCC33
10uF/10V
TANT-A
ADAVSS
0.1u
C0603
VREF
ICE_USBVBUS
CT13
L6
L0603
CB71
VBAT
HEADER 2X1 (1 and 2 short)
HEADER 2X1 (NC)
CT12
VDD5V
HEADER 2X1 (NC)
HEADER 2X1 (NC)
AVDD
L5
L0603
Off-page Connector
VCC33
VDD5V
10uF/10V
TANT-A
JP3
1
2
HEADER 2X1 (NC)
ADAVSS
VCC33
VCC33
JP14
VCC33
1
2
3
U4
VIN VOUT
VSS
CE
SET
NCT3705U-A
SOT-25
5
R17
200K
4
R0603
R171
120K
R0603
17 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
J1
PIN2
PIN4
PIN6
PIN8
PIN10
PIN12
PIN14
PIN16
PIN18
PIN20
PIN22
PIN24
PIN26
PIN28
PIN30
PIN32
PIN34
PIN36
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
J3
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
PIN1
PIN3
PIN5
PIN7
PIN9
PIN11
PIN13
PIN15
PIN17
PIN19
PIN21
PIN23
PIN25
PIN27
PIN29
PIN31
PIN33
PIN35
PIN74
PIN76
PIN78
PIN80
PIN82
PIN84
PIN86
PIN88
PIN90
PIN92
PIN94
PIN96
PIN98
PIN100
PIN102
PIN104
PIN106
PIN108
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
HEADER 18X2 (NC)
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
PIN73
PIN75
PIN77
PIN79
PIN81
PIN83
PIN85
PIN87
PIN89
PIN91
PIN93
PIN95
PIN97
PIN99
PIN101
PIN103
PIN105
PIN107
HEADER 18X2 (NC)
PIN CONNECTOR
J2
PIN38
PIN40
PIN42
PIN44
PIN46
PIN48
PIN50
PIN52
PIN54
PIN56
PIN58
PIN60
PIN62
PIN64
PIN66
PIN68
PIN70
PIN72
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
PIN[1:144]
PIN[1:144]
J4
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
PIN37
PIN39
PIN41
PIN43
PIN45
PIN47
PIN49
PIN51
PIN53
PIN55
PIN57
PIN59
PIN61
PIN63
PIN65
PIN67
PIN69
PIN71
HEADER 18X2 (NC)
May 09, 2014
Off-page Connector
PIN110
PIN112
PIN114
PIN116
PIN118
PIN120
PIN122
PIN124
PIN126
PIN128
PIN130
PIN132
PIN134
PIN136
PIN138
PIN140
PIN142
PIN144
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
PIN109
PIN111
PIN113
PIN115
PIN117
PIN119
PIN121
PIN123
PIN125
PIN127
PIN129
PIN131
PIN133
PIN135
PIN137
PIN139
PIN141
PIN143
HEADER 18X2 (NC)
18 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
JP8
TXD0
TXD
JP9
RXD0
RXD
1
2
HEADER 2X1 (NC)
1
2
Off-page Connector
HEADER 2X1 (NC)
TICEDAT
TICECLK
VCC33
M0_TXD
TICERST
VCC_A
JP10
JP11
TXD
RXD
2
4
6
8
10
ICE_DAT
ICE_CLK
RESET
HEADER 5X2 (NC)
RESET
RXD0
RXD0
HEADER 2X1 (1 and 2 short)
M0_TXD
M0_RXD
GND
1
3
5
7
9
ICE_CLK
TXD0
TXD0
1
2
ICE_DAT
VCC33
M0_RXD
GND
M0_TXD
M0_RXD
VCC33
GND
ICE INTERFACE
VCC33
VCC33
Off-page Connector
R21
330
R0603
R22
330
R0603
PB_10
VCC33
1
1
GND
I/O
VCC33
GND
GND
2
Green
KP-2012
2
Red
KP-2012
POWER
PB_10
PB_10
LED
May 09, 2014
19 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
Nu-Link-Me Schematic
5.2
ICE_JP14
ICE_VCC5
1
2
ICE_VCC
ICE_VCC
HEADER 2X1 (NC)
1
2
ICE_VCC33
ICEL1
3
VCC_A
ICE_VCC
2
1
ICE_USBVBUS
ICED3
SS24A
RB060L
ICEJP1
JP1
HEADER 3X1 (2 and 3 short)
ICE_USBVBUS
L0603
ICEL2
ICE_VCC5
ICE_VCC33
1
2
3
CB72
0.1u
C0603
U1
VIN VOUT
VSS
CE
SET
5
L0603
ICE_DAT
ICE_CLK
ICE_RST
1
3
5
7
9
TICEDAT
TICECLK
TICERST
TICEDAT
TICECLK
TICERST
HEADER 5X1 (NC)
HEADER 5X1
R0603
DEBUG
CB73
R174
120K
R0603
4.7uF
C0603
GND
GND
1
TP1
SIP/1P
ICE_USB_DICE_USB_D+
ICEC1
ICE_VCC
ICE
1
Red
KP-2012
ICP
1
1
3
5
7
ICERP1
2
4
6
8
ICE_VCC
8P4R-330
8P4RA
Y ellow
KP-2012
IDLE
2
ICECT1
10uF/10V
TANT-A
ICELED
ICPLED
RED
GREEN
ICECB1
0.1u
C0603
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
INT0/PB14
CPO1/PB13
CPO0/PB12
X32I
X32O
I2C1SCL/PA11
I2C1SDA/PA10
I2C0SCL/PA9
I2C0SDA/PA8
RX1/PB4
TX1/PB5
RTS1/PB6
CTS1/PB7
LDO
VDD
VSS
1
Red
KP-2012
BUSY
1
TP4
SIP/1P
ICE_VCC
ICE_CLK
ICE_DAT
RRSET1
100K
R0603
VBUS
RESET CIRCUIT
TICEDAT
RTDA3
33
R0603
TX1
M0_TXD
RXD
VCOM1
VCOM_En
1
2
HEADER 2X1 (NC)
HEADER 2X1 (NC)
RX1
M0_RXD
TXD
1
2
ICE_USB_D+
ICE_USB_D-
HEADER 2X1 (NC)
ICECB2
0.1u
C0603
MCU and USB
Title
Nu-Link-Me V2.0
Size
Document Number
Custom
Rev
V2.2
ICE_LQFP64.SCH
Date:
May 09, 2014
RTDA1
100K
R0603
TICERST
TICECLK
RTDA2
0
R0603
TXD
RXD
ICE_RST
ICEC4
10uF/10V
TANT-A
RTCK1
100K
R0603
VCOM_En
ICE_USBVBUS
ICER5
10K
R0603
ICEL3
L0603
1
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
1
2
ICEC3
1uF
C0603
6
7
8
9
1
PA4/ADC4
PA3/ADC3
PA2/ADC2
PA1/ADC1
PA0/ADC0
AVSS
ICE_CK
ICE_DAT
PA12/PWM0
PA13/PWM1
PA14/PWM2
PA15/PWM3
PC8/SS10
PC9/SPCLK1
PC10/SDI10
PC11/SDO10
Green
KP-2012
ICE_VCC
SHIELD
SHIELD
SHIELD
SHIELD
ICE_USBVBUS TP3
SIP/1P
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
GREEN 2
NUC12SRE3AN
VBUS
VDD33
DD+
PB0/RX0
PB1/TX0
PB2/RTS0
PB3/CTS0
PC3/SDO00
PC2/SDI00
PC1/SPCLK0
PC0/SS00
PE5
PB11/TM3
PB10/SS01/TM2
PB9/SS11/TM1
CRYSTAL
VCC
DM
DP
NC
GND
TP2
SIP/1P
STADC/TM0/PB8
PVSS
VDD1
VSS1
/RESET
XT1_In
XT1_Out
INT1/PB15
CPP1/PC14
CPN1/PC15
CPP0/PC6
CPN0/PC7
AVDD
ADC7/PA7
ADC6/PA6
ADC/PA5
ICEU1
GND
20p
C0603
ICEJ1
mini USB 5pin
USB_MINI_B
ICE_AVDD
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
12M_I
1
2
3
4
5
1
ICE_RST
12M_I
12M_O
20p
ICEX1 C0603
12MHz
XTAL3-1
ICEC2
ICE_USBVBUS
ICER2
33
R0603
ICER4
33
R0603
12M_O
RED
M0_TXD
M0_RXD
ICE CONNECT IF
ICE_VCC
ICPLED 2
M0_TXD
M0_RXD
HEADER 5X2 (NC)
HEADER 5X2
POWER
ICELED 2
2
4
6
8
10
ADAVSS
R173
200K
4
NCT3705U-A
SOT-25
ICEJP2
1
2
3
4
5
ADAVSS
ICE_USBVBUS
ICE_VCC
ICE_AVDD
ICE_VCC5
ICE_VCC5
20 of 26
Monday , June 09, 2014
Sheet
2
of
Rev. V1.00
3
NuTiny-SDK-NUC442 User Manual
6
6.1
Step1
Downloading NuMicro™ Related Files from Nuvoton Website
Downloading NuMicro™ Keil μVision® IDE Driver
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro
Step2
Click here to enter
Tool & Software.
Step3
Click here to enter
Device Driver and
Software Library.
May 09, 2014
21 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
Step4
Click here to
download
the file.
Step5
™
®
Download the NuMicro Keil μVision IDE driver.
May 09, 2014
22 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
6.2
Step1
Downloading NuMicro™ IAR EWARM Driver
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro.
Step2
Click here to enter
Tool & Software.
Step3
Click here to enter
Device Driver and
Software Library.
May 09, 2014
23 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
Step4
Click here to
download
the file.
Step5
™
Download the NuMicro IAR EWARM driver.
May 09, 2014
24 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
6.3
Step1
Downloading NuMicro™ NUC442 Series BSP Software Library
™
Visit the Nuvoton NuMicro website: http://www.nuvoton.com/NuMicro.
Step2
Click here to enter
Tool & Software.
Step3
Click here to enter
Device Driver and
Software Library.
Step 3
™
Download the NuMicro NUC442 Series CMSIS BSP.
May 09, 2014
25 of 26
Rev. V1.00
NuTiny-SDK-NUC442 User Manual
7 Revision History
Revision
Date
Description
1.0
May 09, 2014
Initial release
Important Notice
Nuvoton Products are neither intended nor warranted for usage in systems or equipment, any
malfunction or failure of which may cause loss of human life, bodily injury or severe property damage.
Such applications are deemed, “Insecure Usage”.
Insecure usage includes, but is not limited to: equipment for surgical implementation, atomic energy
control instruments, airplane or spaceship instruments, the control or operation of dynamic, brake or
safety systems designed for vehicular use, traffic signal instruments, all types of safety devices, and
other applications intended to support or sustain life.
All Insecure Usage shall be made at customer’s risk, and in the event that third parties lay claims to
Nuvoton as a result of customer’s Insecure Usage, customer shall indemnify the damages and
liabilities thus incurred by Nuvoton.
May 09, 2014
26 of 26
Rev. V1.00