Download Call Forward Module – TPS
Transcript
DT-TPS telephone interface User Manual !"# $% Please read this manual carefully before using the product you purchase, and keep it well for future use.We reserve the right to modify the specification in this manual at any time without notice. 1 8 Basic star wiring mode(for apartment) About TPS Unit HI Discription: ON CALL ON CALL UNLOCK UNLOCK TALK/MON OUT IN TALK/MON IN-USE IN-USE 1 2 3 4 5 6 1 2 3 4 5 6 A B C D DBC-4 The TPS unit is a telephone converter designed for DT 2-wire system to divert calls from outdoor station to telephone or mobile phone.With TPS unit,you can communicate with outdoor visitor by your telephone or mobile phone which just like a remote control,you can do the operation of talking,unlock and so on. Code=31, DIP-6=on Code=32, DIP-6=on ON ON CALL CALL UNLOCK UNLOCK TALK/MON TALK/MON IN-USE IN-USE 1 2 3 4 5 6 1 2 3 4 5 6 Code=29, DIP-6=on Code=30, DIP-6=on Features: 72 mm 90 mm Maximum 3 telephone numbers can be set on monitor. Must be with Call Transfer function for monitor Divert Calls from monitor to telephone via TPS ,the TPS is like a telephone,when setting the diversion function,door station number you set. Application:villa and apartment HI ON ON CALL CALL UNLOCK UNLOCK TALK/MON OUT IN TALK/MON IN-USE 1 2 3 4 5 6 IN-USE 1 2 3 4 5 6 Code=3, DIP-6=on A B C D 60 mm ON ON CALL CALL UNLOCK UNLOCK TALK/MON TALK/MON 1 2 3 4 5 6 DBC-4 Code=4, DIP-6=on IN-USE 1 2 3 4 5 6 IN-USE Code=2, DIP-6=on Code=1, DIP-6=on 1. Terminal Introduction 1 23 4 5 6 ON DIP6=off DPS TPS PS5 85~260AC ID=00 123456 ON 1 2 3 4 5 6 ON DIP DIP: 485 PORT: BUS(IN): BUS(OUT): TEL: PBX: 485 PORT BUS(IN) BUS(OUT) TEL PBX DIP switches,DIP settings refer to 3. 485 connection port,used to update the software for TPS. Input port,connect to power supply. Output port,connect to Monitor. Connect to the telephone. Connect to the telephone network. Power input: Power Consumption: Working temperature: Wiring: Dimension: DC 20~28V Standby(26V):30mA;working(26V):80mA -10ºC +40ºC 2 wire,non-polarity 90(H)X72(W)X60(D)mm 9 Basic in-out mode(for apartment) 2 ON CALL UNLOCK LED TALK/MON IN-USE 1 2 3 4 5 6 BUTTON Code=32, DIP-6=on ON CALL UNLOCK Power Network Reset Status Transfer Recover Test TALK/MON IN-USE 1 2 3 4 5 6 Signal Quality Code=31, DIP-6=off ON * The instructions of indicator: CALL UNLOCK TALK/MON IN-USE 1 2 3 4 5 6 Code=1, DIP-6=off LED indicator TPS 1 23 4 5 6 -LED off When the TPS not working ON Code=1,DIP6=on Descriptions Power to telephone network !" #$#% -Always on when the TPS work normally to telephone Network PS5 DPS Status -Always on when the TPS kits work normally -LED flashes one time when the system receives the effective instruction 85~260AC -LED off When there is no call transfer !" $#$ &$ Transfer !" '% #$ && -Always on when the system in the talking state *!" %$ && ID=00 123456 ON 8 3 Star wiring mode(for villa) * The instructions of button: ON ON CALL CALL UNLOCK UNLOCK TALK/MON IN-USE 1 2 3 4 5 6 Code=13, DIP-6=on A B C D Signal Quality Code=14, DIP-6=on -Press Reset button for 3 seconds,it will restart the TPS. -Reserved ON ON 1 2 3 4 5 6 Test CALL CALL UNLOCK UNLOCK TALK/MON TALK/MON IN-USE Recover -Press Recover button for 3 seconds,it will recover the password defaults 1 2 3 4 5 6 IN-USE Code=11, DIP-6=on Code=12, DIP-6=on -Reserved CALL ON UNLOCK TALK/MON CALL ON UNLOCK HI TALK/MON IN-USE IN-USE 1 2 3 4 5 6 Code=3, DIP-6=on Code=2, DIP-6=on OUT IN 1 2 3 4 5 6 A B C D CALL CALL ON 1 2 3 4 5 6 Step1: Mount the din rail to the wall with screws ; Step2: Pull down the mounting buckle,then hang the unit on din rail. Din rail Code=1, DIP-6=on UNLOCK ON UNLOCK TALK/MON TALK/MON IN-USE IN-USE 1 2 3 4 5 6 Code=0, DIP-6=on 1 23 4 5 6 ON DIP6=off DPS TPS PS5 85~260AC Din rail ID=00 ON 1 2 Note:The TPS unit occupies a user code of 15 DBC-4 2. Mounting Mounting Buckle DBC-4 Reset Descriptions HI IN-USE OUT IN Button TALK/MON 1 2 3 4 5 6 7 4 3. DIP Switches Setting for TPS 6.Wiring Basic in-out mode(for villa) Bit ON CALL UNLOCK TALK/MON Bit State Description 1 2 3 4 5 6 Set to OFF, the TPS no connection. 1 2 3 4 5 6 Set to ON, DT system connected telephone network via local switch. 1 2 3 4 5 6 Set to OFF, the TPS no connection. ON DIP1 IN-USE 1 2 3 4 5 6 ON Code=14, DIP-6=off ON DIP2 Set to ON, DT system connected telephone network directly. 1 2 3 4 5 6 ON ON Door Station speaker adjust—set to OFF, the volume is normal. CALL 1 2 3 4 5 6 UNLOCK ON TALK/MON IN-USE 1 2 3 4 5 6 DIP3 Code=13, DIP-6=off Door Station speaker adjust—set to ON, the volume is twice louder than normal. 1 2 3 4 5 6 ON 1 2 3 4 5 6 Door station micphone adjust—set to OFF, the volume is normal. 1 2 3 4 5 6 Door station micphone adjust—set to ON, the volume is twice louder than normal. 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 ON DIP4 ON ON CALL UNLOCK TALK/MON IN-USE DIP5 ON Reserve 1 2 3 4 5 6 Code=0, DIP-6=off ON Set to OFF, it shows the system is villa. DIP6 ON to telephone to telephone network Set to ON, it shows the system is partment. Note: DIP1 and DIP2 can not be "on" state at the same time. TPS DPS PS4 DIP3 and DIP4 can not be "on" state at the same time. 4.Telephone Number Setting on Monitor Touch screen monitors: AC~ 1 23 4 5 6 ID=00 ON DIP6=off ON 1 2 -Telephone Number- 1 2 3 1> _ 4 5 6 2> _ 7 8 9 3> _ 0 Don’t divert calls Note:The TPS unit occupies a user code of 15 Divert if not answered Divert simultaneously Exit&save Exit&Unsave Maximum 3 telephone numbers can be set,touch the telephone number frame,then input the the number by touching the digital keypad. 5 6 5.Operation Instructions Button operation monitors: GSM configure 1) 0 2) 3) 4)Divert mode select: 2 0:Not 1:Not Answer 2:Simulateously Cancel Edit Save&Exit Maximum 3 telephone numbers can ? @ G JK Y % $ J $$ item,then press the MENU button to @GJKY J decrease the value,and use button to input next digital,use button to button to cancel the input. press Z[@? edit operation. Note: Divert function is activated in the following instructions Item Unlocking Input 1# on your telephone or mobile phone to = Input 2# on you telephone or mobile phone to release the second lock Hanging up Input 9# on your telephone or mobile phone to hang off absolutely Calling next telephone number 1:At least 2 telephone numbers must be set on monitor 2:During communication between telephone and outdoor station,"#" button has not been input on telephone and the calling time of each group number is less than 80 seconds. Calling slave telephone Add a letter "P" between master telephone and slave telephone.The TPS will call the slave telephone directly. Note: There are 3 types of divert modes: 1:Don't divert calls----calls from outdoor station will not be diverted. 2:Divert if not answered----outdoor station calls indoor monitor firstly,if nobody answer the call within 25 seconds,the call will be diverted to the telephone number you set. At this mode,the monitor will shut off immediatelly when TPS deverts sucessfully,while it won't affect the communication between TPS and outdoor station.Otherwise, the monitor can do the operation of monitoring,talking,and unlocking. 3:Divert simutaneously----calls from outdoor station will be diverted to your telephone immediately.At this mode,the monitor won't shut off when TPS deverts sucessfully,but if the monitor answers the call at this time,TPS will quit absolutely. Discription