HP 15-4010nr Maintenance and Service Guide Download

Transcript
Multimedia board
Description
Spare part number
Multimedia board (includes audio port, Card Reader, USB port, and cable)
701820-001
Before removing the multimedia board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see Bottom cover on page 33).
5.
Disconnect the battery cable from the system board (see Battery on page 35).
6.
Remove the power connector cable (see Power connector cable on page 57).
Remove the multimedia board:
1.
Disconnect the multimedia board cable (1) from the system board.
2.
Remove the Phillips PM2.0×4.5 screw (2) that secures the multimedia board to the top cover.
3.
Remove the multimedia board (3) and cable.
Component replacement procedures
59