Download HP 15-4010nr Maintenance and Service Guide

Transcript
Reverse this procedure to install the heat sink.
RJ-45 jack cover
Description
Spare part number
RJ-45 jack cover
701816-001
Before removing the RJ-45 jack cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see Bottom cover on page 33), and then remove the following
components:
a.
Battery (see Battery on page 35)
b.
Fan (see Fan on page 39)
c.
System board (see System board on page 62)
Component replacement procedures
67