Download HP 15-4010nr Maintenance and Service Guide

Transcript
Remove the rear speakers:
1.
Remove the two Phillips PM2.0×3.0 broad head screws (1) that secure the rear speakers to
the top cover.
2.
Remove the rear speakers (2) from the top cover.
NOTE: The rear speakers include two rubber isolators (6). These isolators are crucial to
the performance of the speakers.
Reverse this procedure to install the rear speakers.
WLAN antenna
Description
Spare part number
Antenna Kit (includes left and right WLAN antenna cables and transceivers)
700796-001
Before removing the WLAN antenna, follow these steps:
72
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
Chapter 4 Removal and replacement procedures