1
Download HP SN6000 Command Reference Guide
Transcript
2 sfpShow RX Power: TX Power: -4.0 -3.1 dBm (402.0uW) 10.0 dBm (492.7 uW)125.9 uW 1258.9 uW uW 1000.0 uW 15.8 158.5 uW uW 1000.0 uW 794.3 uW State transitions: 2 Last poll time: 02-03-2012 UTC Fri 07:36:05 To display SFP information when a new SFP is inserted in a disabled port: switch:user> sfpshow 0 Identifier: 3 SFP Connector: 7 LC Transceiver: 540c404000000000 2,4,8_Gbps M5,M6 sw Short_dist Encoding: 1 8B10B Baud Rate: 85 (units 100 megabaud) Length 9u: 0 (units km) Length 9u: 0 (units 100 meters) Length 50u: 5 (units 10 meters) Length 62.5u:2 (units 10 meters) Length Cu: 0 (units 1 meter) Vendor Name: BROCADE Vendor OUI: 00:05:1e Vendor PN: 57-1000012-01 Vendor Rev: A Wavelength: 850 (units nm) Options: 003a Loss_of_Sig,Tx_Fault,Tx_Disable BR Max: 0 BR Min: 0 Serial No: UAF109280000J24 Date Code: 090711 DD Type: 0x68 Enh Options: 0xfa Status/Ctrl: 0x0 Alarm flags[0,1] = 0x0, 0x0 Warn Flags[0,1] = 0x0, 0x0 Alarm Warn low high low high Temperature: Not Available Current : Not Available Voltage : Not Available RX Power : Not Available TX Power : Not Available Last poll time: Polling has not started To display detailed information about all SFPs: switch:user> sfpshow -all (output truncated) ============= Slot 8/Port 50: ============= ============= Slot 8/Port 51: ============= ============= Slot 8/Port 52: ============= QSFP No: 13 Channel No:0 Identifier: 13 QSFP+ 1008 Fabric OS Command Reference 53-1003108-01
