Download American Dryer Corp. AD-75D II User's Manual
Transcript
AD-75D II Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] 073100MFM/tcosta ADC Part No. 450432 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. AD-75D II __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 ........................................................................ 2 Control Door Assembly With Trim For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998 ................................... 3 Phase 5 Coin Microprocessor Control Panel Assembly ...................................................................................... 4 Phase 5 OPL Microprocessor Control Panel Assembly ...................................................................................... 5 Phase 5 Coin and OPL Microprocessor Control Box Assembly ......................................................................... 6 Coin Vault Assembly ............................................................................................................................................ 7 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 ................................................................................... 8, 9 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 ........................................................................................... 10 Dual Timer Control Box Assembly .................................................................................................................... 11 “Plastic” Door Front Panel Assembly ............................................................................................................... 12 Cold Rolled Steel (CRS) Door Front Panel ....................................................................................................... 13 “Plastic” Door Main Door Switch Housing ....................................................................................................... 14 Main Door Switch Assembly Cold Rolled Steel (CRS) Door ............................................................................ 15 Cold Rolled Steel (CRS) Main Door Assembly ........................................................................................... 16, 17 “Plastic” Main Door Assembly .......................................................................................................................... 18 Basket (Tumbler)/Support Assemblies ............................................................................................................... 19 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models ................................................................................................................. 20 Drop Lint Door Assembly With Trim For ALL Coin Models ............................................................................................................................. 21 Basket (Tumbler) Bearing Assembly ........................................................................................................... 22, 23 Lint Trap Assembly ............................................................................................................................................ 24 Idler Bearing Assembly ..................................................................................................................................... 25 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ..................................... 26, 27 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ............................................. 28, 29 Sensor Bracket Assemblies ......................................................................................................................... 30, 31 Electric Oven Assembly .............................................................................................................................. 32, 33 4-Tube Burner Assembly ............................................................................................................................. 34, 35 Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ................................................................................ 36 3-Phase (3Ø) Motor, Electric Relay Panel Assembly ....................................................................................... 37 Microprocessor Reversing Rear Control Box Assembly For Gas, Electric, and Steam Models ................................................................................................... 38 Dual Timer Reversing Rear Control Box Assembly For Gas, Electric, and Steam Models ................................................................................................... 39 Air Operated Steam Damper Assembly ...................................................................................................... 40, 41 Outer Top/Back Guard Assemblies For Gas and Electric Models ONLY ..................................................................................................... 42 Back Guard Assembly For Steam Models ONLY ........................................................................................................................ 43 Microprocessor Coin Acceptors Listing ............................................................................................................ 44 Electric Oven Component Application Chart ..................................................................................................... 45 Step Down Transformer Usage Listing ............................................................................................................. 46 Additional Parts Available .................................................................................................................................. 47 2 Control Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 13, 1998 Illus. No. Part No. Qty. 1 881053 870011 881045* 1 1 1 881046 1 117604 150300 102603 102601 102502 882541 4 4 1 1 1 2 2 3 4 5 6 7 8 * Description ADC Logo ONLY (with double adhesive tape) Logo Double Tape Kit Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Spring Turn Latch Assembly Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3 Control Door Assembly With Trim For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 * Part No. Qty. 160015 1 160017 1 160104 160016 112350 870011 800020* 1 1 1 1 1 800144 1 180202 117603 150201 150309 102603 102601 102502 1 3 6 4 1 1 1 Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY (for dummy lock also) Lock Cam ONLY ADC Logo ONLY Logo Double Tape Kit High Security Control Door Assembly (includes illus. nos. 4 through 7) Stainless Steel High Security Control Door Assembly (includes illus. nos. 4 through 7) Top Trim Strip (gray) with Lock Hole (38-1/4” length) Suppressor Tape/Gasket (sold by the foot) #10-32 x 1/4” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 Qty. 112526 801213 1 1 801229 1 5 6 7 801259 801258 150309 137213 824998 153010 150005 -------- 1 1 1 1 1 2 2 1 8* -------- 1 9* 10 137023 137021* 880772 824080 122800 136048 1 3 1 1 1 1 3 4 11 * Part No. Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, and 6) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4, 5, and 6) Coin Control Panel ONLY Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 44) Optic Switch ONLY (refer to Microprocessor Coin Acceptors Listing on page 44) Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (slo blo) Fuse For dual coin models double the quantity shown. IMPORTANT: Check label on computer chip to verify correct part number of controller. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 Part No. Qty. 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150413 136048 1 1 1 2 2 1 1 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only) ... Not Illustrated OPL Stick-On Labels ... Not Illustrated (Spanish, Italian, and Hebrew) 3-Language OPL Stick-On Labels ... Not Illustrated (English, Spanish, and Hebrew) 5-Language OPL Stick-On Labels ... Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” TORX Crimptite 1/8-Amp (slo blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Phase 5 Coin and OPL Microprocessor Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 * Part No. Qty. 141403 1 132070 1 150300 120715 150002 151000 136057 150301 136008 122641 122706 112801 2 1 2 2 * * * 1 * 1 Description Transformer - 24 VAC (for ALL 120/208/240/380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) Transformer - 24 VAC (for 208/240 volt electric models) #10 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #6-32 Pal Nut 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip ONLY 15-Pin Microprocessor Connector Socket ONLY Pin/Socket Extraction Tool As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 7 Coin Vault Assembly Illus. No. 1 Qty. 802112 1 4 802117 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 9 802019 125915 802018 152014 102502 102601 102603 1 1 1 4 1 1 1 2 3 * Part No. Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Cam For 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Face Plate ONLY 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Support Catch Specify key number when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 9 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 2 3 123005 122400 824015 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --- 800051 131917 150207 154001 152000 153010 120730 150002 150110 150001 131931 151000 112050 150309 124103 124025 124030 122602 122700 122801 1 1 2 2 2 2 1 2 4 2 1 2 1 1 2 1 1 1 8 1 Telephone: (508) 678-9000 Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Arrow Timer Knob 60 Minute Timer - 24 VAC 15 Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool Fax: (508) 678-9447 10 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 124030 124025 824175 122301 131932 120730 151000 882903 1 1 1 1 3 1 6 1 9 10 11 12 13 14 15 850392 153010 152000 150207 150110 112563 124104 124105 2 3 2 4 1 1 1 American Dryer Corporation Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer 88 Currant Road / Fall River, MA 02720-4781 11 Dual Timer Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8** 9 10 11 12 Part No. Qty. 122603 122701 122801 315010 150300 150300 141403 1 8 1 1 2 2 1 132070 1 136008 136057 150301 150002 120715 151000 * * * 2 1 2 Description 9-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2” Hex Washer TEK Screw #10 x 1/2” Hex Washer TEK Screw Transformer - 24 VAC (for ALL 120/208/240/380/416/480 volt gas and steam models) (for 380/416/480 volt electric models) Transformer - 24 VAC (for 208/240 volt electric models) Fuse Block/Strip ONLY 1/2-Amp (slo blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut * As required. ** Check fuse rating for verification. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 “Plastic” Door Front Panel Assembly Illus. No. Part No. Qty. 1 875302* 1 875313 1 2 3 4 5 154215 170330 150300 150313 2 1 1 8 6 150309 150318 121405 8 ** 1 Description Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) Stainless Steel Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1, 2, 3, and 6) 5/32 x 1/4” Rivet Friction Door Latch #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” TORX-Plus BTN, Type 1 (for models mfd. as of October 2, 2000) #10-16 x 1/2” Hex Head TEK Crimptite Screw 25IP Stick-Fit TORX-Plus Bit Rubber Grommet * Specify color when ordering. ** As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 13 Cold Rolled Steel (CRS) Door Front Panel Illus. No. Part No. Qty. 1 881273* 1 881289 1 154215 170330 150300 150313 2 1 1 8 150309 150318 881152 881208 150445 150443 881151 881209 8 ** 1 1 4 4 1 1 2 3 4 5 6 7 8 Description Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) 5/32 x 1/4” Rivet Friction Door Latch #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” TORX-Plus BTN, Type 1 (for models mfd. as of October 2, 2000) #10-16 x 1/2” Hex Head TEK Crimptite Screw 25IP Stick-Fit TORX-Plus Bit Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Block Assembly * Specify color when ordering. ** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Illus. No. “Plastic” Door Main Door Switch Housing Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 313218 150201 121405 2 1 2 1 American Dryer Corporation Description #6-32 Hex Nut 1/4” ATF Zinc Plated #6 Lock Washer Single-Pole Door Switch (SDS) Insulated Terminal ONLY 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head TEK Screw Rubber Grommet 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly Cold Rolled Steel (CRS) Door Illus. No. 1 2 3 4 5 6 7 Part No. 153566 152013 153010 137005 122636 881211 150301 Qty. 2 2 2 1 2 1 2 Telephone: (508) 678-9000 15 Description #6-32 x 7/8” Clinch Stud #6-32 Hex Nut 1/4” ATF Zinc Plated #6 Star Washer Single-Pole Door Switch (SDS) Flag Terminal Main Door Switch Housing #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 16 American Dryer Corporation Cold Rolled Steel (CRS) Main Door Assembly 88 Currant Road / Fall River, MA 02720-4781 17 Cold Rolled Steel (CRS) Main Door Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No. Qty. 881150 1 881207 1 102354 170730 170731 881152 1 1 1 1 881208 1 150445 150443 153031 881151 2 2 1 1 881209 1 150445 150443 150683 150682 2 2 3 3 152014 151010 151009 150120 150683 150682 3 1 1 1 3 3 152014 881210 170333 102210 170730 3 1 1 1 1 Telephone: (508) 678-9000 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Stainless Steel Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass and Gasket Adhesive (10.3 oz. cartridge) Black Glass and Gasket Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) Stainless Steel Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) Stainless Steel Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 x 5/8” Stainless Steel Carriage Bolt (for models with stainless steel doors) 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut #10-32 Stainless Steel Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 x 5/8” Stainless Steel Carriage Bolt (for models with stainless steel doors) 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY Stainless Steel Main Handle ONLY 20-7/16” Door Glass Clear Glass and Gasket Adhesive (10.3 oz. cartridge) Fax: (508) 678-9447 18 Illus. No. “Plastic” Main Door Assembly Part No. Qty. 1 881421 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 4 4 4 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with (4) Holes Clear Glass and Gasket Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head) 88 Currant Road / Fall River, MA 02720-4781 19 Basket (Tumbler)/Support Assemblies Illus. No. 1* Qty. 800708 800857 800816 1 1 1 800873 1 800819 1 800876 1 2 150413 150429 40 1 3 301308 301408 150500 100905 153004 800613 800615 152005 153005 153004 116000 401010 4 4 1 4 4 1 1 4 4 4 1 1 4 5 6 7 8 9 10 11 --* Part No. Description Basket (tumbler) ONLY without Felt Collar Stainless Steel Basket (tumbler) ONLY without Felt Collar Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Crimptite TORX Hand Driver (for removal of TORX head screw) Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 3/8-16 x 37” Tie Rod 3/8” Flat Washer Non-Reversing Basket (tumbler) Support ONLY Reversing Basket (tumbler) Support ONLY 3/8” Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar Felt collar is not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Illus. No. 1 Qty. 160001 160103 800150 1 1 1 2 160003 160104 160008 160009 150425 1 1 1 1 1 3 4 157000 802104* 1 1 882106 1 150201 117604 150419 108120 150418 6 7 2 1 1 5 6 7 8 * Part No. Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam For AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 21 Drop Lint Door Assembly With Trim For ALL Coin Models Illus. No. 1 Qty. 160001 160103 800150 1 1 1 2 160003 160104 160008 160009 150425 1 1 1 1 1 3 4 157000 800237* 1 1 880229 1 150201 117604 117603 180212 150419 108120 150418 6 7 3 1 2 1 1 5 6 7 8 9 10 --* Part No. Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam For AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) Suppressor Tape/Gasket (sold by the foot) Mid Trim/Kick Plate - Gray (8-1/4” length) #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 22 American Dryer Corporation Basket (Tumbler) Bearing Assembly 88 Currant Road / Fall River, MA 02720-4781 23 Basket (Tumbler) Bearing Assembly Illus. No. 1 2 3 4 Part No. Qty. 880220 153025 152050 882544 1 4 4 1 882545 1 882542 882543 1 1 5 880202 880779 1 1 6 7 8 9 10 11 12 13 14 15 16 17 150601 153004 153004 153005 152005 154326 152004 150621 153002 153004 150501 102120 2 2 2 2 2 2 2 2 4 6 4 1 18 19 824807 100735 1 1 20 101100 1 101118 1 21 101119 1 22 100108 100106 1 1 23 24 150610 152004 2 2 Telephone: (508) 678-9000 Description 1-3/4” Flange Bearing 9/16” Lock Washer 9/16-12 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 17) Pillow Block Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 18) Pillow Block Bearing Platform ONLY Pillow Block Bearing Platform ONLY (for models with rotational sensor) 1-3/8” Pillow Block Bearing 1-3/8” Pillow Block Bearing (for reversing models Only) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt Zinc 5/16” Lock Washer 3/8” Flat Washer 5/16-18 x 3/4” Tap Bolt Zinc Sintered 8 Magnet (for reversing models Only) Rotational Sensor Assembly Shaft Key (for reversing models Only) 18” Pulley (for non-reversing models Only) 18-3/4” Pulley (for reversing models Only) 1-3/8” Taper Lock Bushing (for reversing models Only) 5L-680 V-Belt (basket [tumbler] to idler) 5L-690 V-Belt (for reversing gas and electric models Only) 5/16-18 x 1-1/2 Allen Setscrew 5/16-18 Hex Nut Fax: (508) 678-9447 24 Lint Trap Assembly Illus. No. 1 2 3 4 5 6 7 - Part No. Qty. 800440 1 800433 800441 1 1 800434 154200 304101 150300 800506 150419 108120 150418 1 7 1 3 1 2 1 1 American Dryer Corporation Description Non-Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Non-Reversing Lint Trap ONLY Reversing Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder ONLY #10 x 1/2” Hex Washer TEK Screw Lint Screen ONLY #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver 88 Currant Road / Fall River, MA 02720-4781 25 Idler Bearing Assembly Illus. No. Part No. Qty. 1 100108 100106 1 1 2 3 101140 100114 100109 1 1 1 4 5 6 154301 100705 882576 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 Telephone: (508) 678-9000 Description 5L-680 V-Belt 5L-690 V-Belt (for reversing gas and electric models Only) 14” x 3” Compound Pulley 4L-630 V-Belt 4L-650 V-Belt (for reversing steam models Only) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 26 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. 1 2 3 4 5 6 7* 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 * Part No. Qty. 100114 100701 101133 101130 150501 153002 153001 100073 1 1 1 1 4 4 4 1 122701 122801 137030 152004 153002 153001 117604 154000 800919 803992* 8 1 1 4 4 4 4 4 1 1 803953 1 803955* 1 803958* 1 153051 882670 100714 153050 152006 120200 100075* 1 1 1 2 2 1 1 100076 1 27 Description 4L-630 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (60 Hz Only) 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 120/208/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) 3/4 HP 230v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 HP 230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 3/4” S.A.E. Flat Washer 16” Fab Fan Assembly (rivets) 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 3/4 HP 230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor 56Z Frame (50 Hz Only) Specify voltage when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. 1 Part No. Qty. 100114 1 100109 1 4 5 100701 101130 101139 120200 181003 1 1 1 1 1 6 7 8 9* 150501 153002 153001 100075 4 4 4 1 10 11 12 13 14 15 16 17 18 120200 150501 153002 153001 154000 152004 153002 153001 800920 803952** 1 4 4 4 8 7 7 7 1 1 803987** 1 19 117604 4 20 21 22 153051 100702 882670 881428 1 1 1 1 23 24 153050 152006 *** 2 2 3 29 Description 4L-630 V-Belt (motor to idler) For Reversing Gas and Electric Models ONLY 4L-650 V-Belt (motor to idler) For Reversing Steam Models ONLY 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz Only) 5/8” x 2-3/4” Motor Pulley (50 Hz Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 208/230/240/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 Tinnerman Nut 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) For Models Mfd. as of August 6, 1998 3/4” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 16” Fab Fan Assembly (rivets) 13” Impellor with 3/4” Bore (for models mfd. prior to March 1, 1995) 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 American Dryer Corporation Sensor Bracket Assemblies 88 Currant Road / Fall River, MA 02720-4781 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130301 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150005 130111 130110 130301 130101 153010 152000 840065 121028 122701 122605 831702 1 1 4 2 5 1 1 1 1 5 5 1 8 4 1 1 25 801418 1 305007 122604 122700 122801 150301 1 1 4 1 2 26 27 28 Telephone: (508) 678-9000 31 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Large Thermostat 150° Large Thermostat 225° Large Manual Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor (4) Bracket Harness Assembly (includes illus. nos. 22 through 24) Non-Computer Sensor (4) Bracket Assembly Complete - Includes Thermostats (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 32 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 33 Electric Oven Assembly Illus. No. Part No. Qty. 1 803005 ---------* ---------* 150300 802800 802801 1 1 2 1 1 154004 150413 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121012 152014 ---------* ---------* 120081 120080 152008 121011* ---------* 153009 320607 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * Description Large Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” TORX Crimptite Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw 290° Hi-Limit #10 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut Terminal Lug For 110-8 Wire 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw Refer to Electric Oven Component Application Chart on page 45. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 American Dryer Corporation 4-Tube Burner Assembly 88 Currant Road / Fall River, MA 02720-4781 4-Tube Burner Assembly Illus. No. 1 ** ** 2 3 4 5 6* 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - Part No. 810047 882802 882801 141105 141210 318714 150300 140820 140805 150108 142707 151001 128927 150309 142506 152013 810030 128935 809309 142600 319704 151000 150001 130201 318700 143000 154004 802799 122200 150303 105500 319202 154002 142809 881231 Qty. 1 1 1 4 1 1 9 4 4 4 1 4 1 5 1 2 1 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 35 Description Direct Spark Ignition (DSI) Burner Box 4-Tube Burner Burner Assembly (4-tube) Natural Gas Burner Assembly (4-tube) Liquid Propane (L.P.) Gas Large Burner Tube 3/4” Direct Spark Ignition (DSI) Manifold (4-port) Bracket For Horizontal Facing Gas Valve #10 x 1/2” Hex Washer TEK Screw Natural Orifice #29 Liquid Propane (L.P.) Gas Orifice #47 #8-32 x 1/2” Pan Head Machine Screw 1/2” x 1-1/2” B.I. Nipple #8-32 Pal Nut 24 VAC Gas Valve #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Street Elbow #6-32 Hex Nut 1/4” ATF Zinc Plated Johnson Controls Direct Spark Ignition (DSI) Module Mounting Bracket Direct Spark Ignition (DSI) Module with Three Tries Ignitor Probe Assembly with 19” Leads 1/2” Black Union Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º Hi-Limit Manual Reset Pipe Bracket (bent) 3/4” to 1/2” Reducing Coupling Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener 1/2” x 29-1/8” Pipe AD-75D II Liquid Propane (L.P.) Conversion Kit ... Not Illustrated * Orifices are at sea level for elevations above 2,000 feet. Consult the factory. ** Orifices are not included. Telephone: (508) 678-9000 Fax: (508) 678-9447 36 Illus. No. Single-Phase (1Ø) Motor, Electric Relay Panel Assembly Part No. Qty. 1 2 3 132475 150299 824828 1 2 1 - 322809 150301 1 4 American Dryer Corporation Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Head TEK Screw RC Network with Connectors (for microprocessor controller [computer] models Only) Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated 88 Currant Road / Fall River, MA 02720-4781 37 3-Phase (3Ø) Motor, Electric Relay Panel Assembly Illus. No. * Part No. Qty. 1 2 3 322812 132430 137015 1 1 1 4 5 6 7 8 9 10 11 ------- 150103 151001 153002 152004 120701 150008 151000 121300 322809 150301 ---------* 2 2 1 1 1 2 2 3 1 4 1 Description Back Electrical Box Component Plate Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC RC Network (for microprocessor controller [computer] models Only) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer Refer to Step Down Transformer Usage Listing on page 46. Telephone: (508) 678-9000 Fax: (508) 678-9447 38 Microprocessor Reversing Rear Control Box Assembly For Gas, Electric, and Steam Models Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------* Part No. Qty. 322812 137060 137013 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 ---------* 1 1 4 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1 Description Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer Refer to Step Down Transformer Usage Listing on page 46. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 39 Dual Timer Reversing Rear Control Box Assembly For Gas, Electric, and Steam Models Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------* Part No. Qty. 322812 132198 150301 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 ---------* 1 1 2 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1 Description Back Electrical Box Component Plate Reversing Timer (50/60 Hz) - 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) - 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Transformer Refer to Step Down Transformer Usage Listing on page 46. Telephone: (508) 678-9000 Fax: (508) 678-9447 40 American Dryer Corporation Air Operated Steam Damper Assembly 88 Currant Road / Fall River, MA 02720-4781 Air Operated Steam Damper Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 165009 153002 152004 152002 153007 820321 803415 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151007 152007 100497 100492 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 108 1 1 1 1 1 4 4 1 1 1 1 1 1 2 2 2 1 2 2 1 Telephone: (508) 678-9000 41 Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/4” Bore x 3” Stroke Piston Piston Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) Fax: (508) 678-9447 42 Outer Top/Back Guard Assemblies For Gas and Electric Models ONLY Illus. No. 1 2 3 4 5 6 7 8 9 Part No. 322809 150301 323738 150301 150301 312527 314526 150301 103500 Qty. 1 5 1 6 8 1 1 10 4 American Dryer Corporation Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Outer Top Guard Lower Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 88 Currant Road / Fall River, MA 02720-4781 43 Back Guard Assembly For Steam Models ONLY Illus. No. 1 2 3 4 5 Part No. 314511 150300 150301 322809 150301 103500 Qty. 1 2 8 1 4 4 Telephone: (508) 678-9000 Description Bottom Back Guard #10 x 1/2” Hex Washer TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg Fax: (508) 678-9447 44 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is Part No. 881143. Replacement optic switch for Greenwald acceptors is Part No. 137056. Single Coin* ADC Part No. Nation 882689 United States 125100 U.S. and Canada 125107 881768 881604 125103 125121 125133 Australia Australia Japan ----Hong Kong Description 25¢ Hanke Optic Coin Acceptor (includes optic switch PN-881143) For Models Mfd. as of June 15, 2000 25¢ Optic Coin Acceptor (for models mfd. prior to June 15, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Greenwald Optic Coin Acceptor 0.800 Token Greenwald Optic Coin Acceptor $1 Greenwald Hong Kong Optic Coin Acceptor Dual Coin* 881508 881842 881542 881846 881541 * U.S. and Canada Canada United Kingdom France Netherlands 10¢ / 25¢ Hanke Dual Optic Coin Acceptor 25¢ / $1 Hanke Dual Optic Coin Acceptor 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 2 / 5 Franc Hanke Dual Optic Coin Acceptor 25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor Consult factory for coin acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase Wire Elements Oven Assembly* Part No. Qty. Size Part No. Oven Wire Terminal Lug Qty. Size Part No. Qty. Part No. B u s B ar P/N 121011 Oven Relay Volt 40 416 3ø 3 or 4 824822 6 6.6 120027 4 #6 13 3 2 0 0 9 121010 1 DFAG 131361 36 208 3ø 3 or 4 824921 6 6 120015 4 #2 133302 4 121012 1 GEAJ 131385 36 230 3ø 3 824920 6 6 120014 4 #2 13 3 3 0 2 9 121012 1 FEAJ 131375 36 416 3ø 3 or 4 824921 6 6 120015 4 #4 133300 4 121012 1 DFAG 131361 36 460/480 3ø 3 or 4 824920 6 6 120014 4 #2 133302 9 121012 1 DPA43 131357 33 380 3ø 3 or 4 825078 6 6.6 120015 5 #2 -------- 4 121012** 1 DFAJ 131361 30 208 3ø 3 or 4 8 2 4 9 18 6 5 120012 6 #4 133300 3 121012 1 FEAJ 131375 30 230 3ø 3 824935 6 5 120013 3 #4 133300 4 121012 1 FEAJ 131375 30 416 3ø 3 or 4 824947 6 5 120012 4 #8 133100 6 121010 2 DPA43 131357 30 460/480 3ø 3 or 4 824953 6 5 120013 4 #8 133100 6 121010 2 BFAJ 131351 25 380 3ø 3 or 4 824940 6 5 120012 4 #8 133100 6 121010 2 BFAJ 131351 24 208 3ø 3 or 4 8 2 4 9 16 6 4 120010 3 #4 133300 4 121012 1 DPA63 131369 24 230 3ø 3 824933 6 4 120011 3 #6 133200 3 121010 1 DFAG 131361 24 416 3ø 3 or 4 824946 6 4 120010 4 #8 133100 6 121010 2 BFAJ 131351 24 460/480 3ø 3 or 4 824952 6 4 120011 4 #10 133000 6 121010 2 BFAJ 131351 20 208 1ø 2 824904 5 4 120010 2 #4 133300 2 121010 2 GEAJ 13 13 8 5 20 230 1ø 2 824926 5 4 120011 2 #4 133300 3 121010 2 FEAJ 131375 20 380 3ø 3 or 4 824939 6 4 120010 4 #10 133000 6 121010 2 BFAJ 131351 Cat. No. Part No. * Oven assembly complete does not include oven relay. This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls. ** Wire is included with the terminal lugs. 45 Fax: (508) 678-9447 Kw Electric Oven Component Application Chart Telephone: (508) 678-9000 ADE-75D II 46 Step Down Transformer Usage Listing S TEP DOW N TRANSFORM ER USAGE L ISTING Voltage Wire Service Transformer Part No. 380 3 132059 380 4 132059 GAS 416 3 132062 ELECTRIC STEAM 416 4 132062 460/480 3 132053 460/480 4 132053 575 3 132050 Heat American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Additional Parts Available Part No. 112039 112280 112041 112534 114006 120100 120300 120400 120500 120600 120800 120802 120902 120903 121014 121499 121500 121503 122804 404500 404502 404506 404507 410001 880200 880884 47 Description “Black/White/Green Ground” Label “Clean Lint Screen” Label “CAUTION - Exhaust” Label “Phase 5 OPL Program Location Summary” Label “WARNING - Fire Hazards” Label 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Greenfield (BX) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Closed End Connector 1/4” Insulated (female) Terminal 5-1/2” Harness Tie 7” Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) For Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Almond “B” Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for removal of shutoff valve tail piece) Electrical Terminal (assortment) Kit Basket (tumbler) Bearing Puller Telephone: (508) 678-9000 Fax: (508) 678-9447 ADC 450432 1 - 12/11/00-25 2 * 09/10/01-25