Download Craftsman 917.388224 Owner`s manual
Transcript
Owner's Manual ICRAFTSMAN'I 4.5 HORSEPOWER 22" SIDE DISCHARGE ROTARY LAWN MOWER Model No. 917.388224 • • • • Safety Assembly Operation Maintenance • • Espa_ol Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit our Craftsman websile: wv#w.sears.com/ctaftsrnan Warranty ................................................. 2 Safety Rules ........................................ 2-4 Assembly ................................................ 5 Operation ............................................. 6-9 Maintenance Schedule ........................ 10 Maintenance .................................... 10-13 Product Specifications .......................... 11 Service and Adjustments ...................... 14 Storage ............................................ 15-16 Troubleshooting .............................. 16-17 Repair Parts ..................................... 34-39 Parts Ordedng ........................ Back Cover LIMITED TWO YEAR WARRANTY ON CRAFTSMAN POWER MOWER For two years from date of purchase, when this Craftsman Lawn Mower is maintained, lubricated, and tuned up according to the operating and maintenance instructions in the owner's manual, Scars will repair free of charge any defect in matedal or workmanship. If this Craftsman Lawn Mower is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This Warranty does not cover: • Expendable items which become worn during normal use, such as rotary mower blades, blade adapters, belts, air cleaners and spark plug. • Repairs necessary because of operator abuse or negligence, including bent crankshafts and the failure to maintain the equipment according to the instructions contained in the owner's manual. Warranty service is available by returning the Craftsman power mower to the nearest Sears Service Center/Department in the United States. This warranty applies only while this product is in use in the United States. This Warranty gives you specific legal dghts, and you may also have other rights which vary from state to state. SEARS, ROEBUCK AND CO., D/817 WA, HOFFMAN ESTATES, ILLINOIS 60179 IMPORTANT: This cutting machine is capable of amputating bands and feet and throwing objects. Failure to observe the following safety instructionscould result in serious injury or death. • Be sure the area is clear of other I. GENERAL OPERATION people before mowing. Stop machine if • Read, understand, and follow all anyone enters the area. instructionson the machine and In the • Do not operate the mower when manual(s) before starting. Be thorbarefoot or weadng open sandals. Always wear substantial foot wear. oughly familiar with the controls and the proper use of the machine before • Do not pull mower backwards unless starting. absolutely necessary. Always look down and behind before and while • Do not put hands or feet near or under rotating parts. Keep clear of the moving backwards. discharge opening at all times. • Do not operate the mower without • Only allow responsible individuals, who proper guards, plates, grass catcher or are familiar with the instructions,to other safety protective devices in operate the machine. place. • Clear the area of objects such as rocks, • See manufacturer's instructionsfor toys, wire, bones, sticks, etc,, which proper operation and installation of could be picked up and thrown by the accessories. Only use accessories blade. approved by the manufacturer. • • • • • • Stop the blade(s) when crossing gravel drives, walks, or roads. Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute. Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher. Mow only In daylight or good artificial light. Do not operate the machine while under the influence of alcohol or drugs. Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle and walk; never mR. • Disengage the self-prepelled mechanism or drive clutch on mowers so equipped before starting the engine (motor). • If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a waming of trouble. • Always wear safety goggles or safety glasses with side shields when operating mower, II, SLOPE OPERATION Slopes are a major fastor related to slip and fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO: • Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes. • Remove obstacles such as rocks, tree limbs, etc. • Watch for holes, ruts,or bumps. Tall grass can hide obstacles. DO NOT: • Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance. • Do not trim excessively steep slopes. • Do not mow on wet grass. Reduced footing could cause slipping. III. CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the trimming area and under the watchful care of another responsible adult. 3 • Be alert and tum machine oft if children enter the area. • Before and while walking backwards, look behind and down for small children. • Never allow children to operate the machine. • Use extra care when approaching blind comers, shrubs, trees, or other objects that may obscure vision. IV. SERVICE • Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive. - Use only an approved container. - Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke. - Never refuel the machine indoors. - Never store the machine or fuel container inside where there is an open flame, such as a water heater. • Never run a machine inside a closed area. • Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. • Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment In good condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never attempt to make wheel height adjustments while the engine (motor) is running. • Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. • Do not change the engine governor setting or overepeed the engine. _.Look for this symbol to point out important safety precautions. It means CAUTION!!I BECOMEALERT!!I YOUR SAFETY IS INVOLVED. a, WARNING: In order to prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. _WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductiveharm. Wash hands after handling. a, CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas. _,WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or ether reproductive harm, These accessorieswere availablewhen thislav,_mower was produced. They are not shipped with your mower. They are also availableat most Sears retailoutletsand service centers. Most Sears stores can also order repairpartsfor you,whenyou pro_de the rnod_ numberof yourlawnmower. Some of these accessoriesmay not applyto yourlawn rncwer. LAWN MOWER PERFORMANCE FeR REAR DISCHARGE LAWN MOWERS REAR MULCNER KITS DISCHARGE LAWN SIDE MOWERS LAWN STABIUZER DISCHARGE MOWERS GAS CANS LAWN MOWER MAINTENANCE MUFFLERS BELTS AIR RLTERS BLADES BLADE ADAPTERS SPARK PLUGS WHEELS ENGINE OIL Read these instructionsand this manual in its entirety before you attempt to assemble or operate your new lawn HOWTO SET UPYOUR MOWER TO UNFOLD HANDLE LAWN mowsr. IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shippingpurposes. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers. bolts,etc., necessary to complete the assembly have been placed in the parts bag. TO REMOVE LAWN MOWER FROM CARTON 1. Remove loose parts included with mower. 2. Cut down two end comers of carton and lay end panel down flat. 3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle. 4. Roll lawn mower out of carton and check carton thoroughly for additional loose parts. IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables. 1. Raise handles until lower handle section locks into place in mowing position. 2. Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs. 3. Remove handle padding holding operator presence control bar to upper handte. Your lawn mower handle can be adjusted for your mowing comfort. Refer to "ADJUST HANDLE" in the Service and Adjustments section of this manual. control bar position Lower handle TO INSTALL A'rrACHMENTS Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging, see "TO CONVERT MOWER' in the Operation section of this manual. KNOWYOUR LAWN MOWER READTHIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA'RNGYOUR LAWN MOWER. Comparethe ilustra'deaswith yourlawn mower to familiarize yourselfwith the locationof variouscontrolsand a_ustments. Save thismanual for future reference. These symbols may appear on your lawn mower or In literature supplied with the product. Learn and understand their meaning. CALmON ENGINE OR WARNING ON ENGINE OFF FAST SLOW CHOKE FUEL OIL DANGER, KEEP HANDS AND FEET AWAY Operator presence control bar gine zone control cable Handle knob Starter handle Gasoline filler cap Air tilter Pdmer Housing Discharge guard IMPORTANT: This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine. Wheel a_uster (on eachwheel) MEETS CPSC SAFETY REQUIREMENTS Sears rotary walk-behind power lawn mowers conform to the safety standards of the Amedcan National Standards Institute and the U.S. Consumer Product Safety Commission. The blade turns when the engine is running. Operator preaence conlTofbar- mast be helddownto the handle_ start the engine, Releaseto stop the engine, Starter handle - usedfor startingthe engine Primer - pumpsadditionalfuelfrom the carburetorto the cylinderfor use when startinga coldengine. 6 The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HOWTO USEYOUR LAWN MOWER ENGINE SPEED The engine speed was set at the factory for optimum performance. Speed is not adjustable. ENGINE ZONE CONTROL _,CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control.The blade turns when the engine is running. • Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start and operate the lawn mower. TO ADJUST cUTrlNG HEIGHT Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns. • To change cutting height, squeeze adjuster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting. NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, g-position adjusters (if so equipped) allow lever to be positioned between the plate tabs. Lower Wheelsfor HighCut RaiseWheelsfor LowCut TO CONVERTTO DISCHARGING MOWER Your mower is shipped ready to be used as a mulcher.To convert to bagging or discharging: • Lift discharge guard and remove mulcher plate. • Mower can now be used for side discharge or optional grass catcher can be attached. • To return to mulching operation, simply reinstall mulcher plate as shown. ACAUTION: Do not run your lawn mower without discharge guard, approved grass catcher or mulcher plate in place. Housing opening Mu_ch Tab Hinge rod BEFORE STARTING ENGINE ADD OIL Your lawnmower is shipped without oil in the engine. Engine holds 20 oz. of oil. For type end grade of oil to use, see =ENGINE" in Maintenance section of this manual. 1. Be sure lawnmower is level and area around oil fill is clean. 2. Remove engine oil cap and fill to the full line on the dipstick. Pour oil slowly. Do not over fill. NOTE: Allow oil to settle down into engine for accurate reading. To read proper level, tighten engine oil cap, then remove it to read the dipstick. 3. Reinstall engine oil cap and tighten. • Check oil level before each use. Add oil if needed. Fill to full line on dipstick. • Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. ADD GASOLINE • Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. AWARNING: Expe dence indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. A, CAUTION; Fillto bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. Engine oil ca Gasoline TO START ENGINE NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal. 1. To start a cold engine, push pdmer three (3) times before tryingto start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes. 2. Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back. TO STOP ENGINE • To stop engine, release operator presence control bar. NOTE: In cooler weather it may be necessary to repeat pdming steps. In warmer weather over pdming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps. 8 MOWINGTIPS • Under certain conditions, such as very tall grass, it may be necessary to raise the height of cut to reduce pushing effort and to keep from overloading the engine and leaving clumps of grass clippings. It may also be necessary to reduce ground speed and/or run the lawn mower over the area a second time. • For extremely heavy cutting, reduce the width of cut by overlapping previously cut path and mow slowly. • For better grass bagging and most cutting conditions, the engine speed should be set in the fast position. • For side discharge lawn mowers, cutting in a counter-clockwise direction, starting at the outside of the area to be cut, spreads grass clippings more evenly and puts less load on the engine. To keep clippings off of walkways, flower beds, etc., make the first cuts in a clockwise direction. • Pores in cloth grass catchers can become filled with dirt and dust with use and catchers will collect less grass. To prevent this, regularly hose catcher off with water and let dry before using. • Keep top of engine around starter clear and clean of grass clippings and chaff. This will help engine air flow and extend engine life. MULCHING MOWING 11PS IMPORTANT: Forbest performance,keep mower housingfree of bugt-upgrassand trash. See "CLEANING" in the Maintenance sec_onof tNs manusl. • The spacbl rnulchingblade wil recatthe grass dippingsmany times and reduce them in size sothat as they fal ontothe lawnthey willclsperse intothe grassand nct be nofk:ed. Also,the muichadgrass will biodegradequicklyto providenutrients for the lawn. Always mulch with your highestengbe (blade) speed as thiswil providethe best reout_ngaction of the blades. • Avoid cu_ng yourlawn when it is wst. Wet grasstendsto form dumps and interferes withthe mulchingaction. The besttimeto mow your lawn is the earlyafternoon. At tNs time the grasshas dried and the newly cut area wil not be exposedto the direct sun. • For best results,adjustthe lawn mower curing heightso that the lawn mower cuts offonlythe topone-thirdof the grass blades. Ifthe lawn is overgrownit wiil ha necessaryto raisethe heightof cut to reducepushingeffortandto keep from ovedoadbgtheengineand leaving clumpsof mulched grass. For extremely heavy mulching,reduceyourwidthof cut by overlappingpreviouslycut path and mow slov,,ly. • Certaintybes of grassand grasscanOk tions may requirethat an area ha mulched a secondtime to completelyhidethe clippings.When dok_ga secondcut,mow acres or perpendculartothe firstcutpath. • Change yourcuttingpattern from week to week. Mow northto southoneweek than change to eest to weet the nextweek. This will help preventmatting and g_Nng of the lawn. Max. 1/3 MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE Check for Loose Fasteners Cieardlnspect Grass Catcher <If Equipped) Clean Lawn Mower SERVICE DATES "_#/ t/ ' " " _ _ II,/' Clean Under Drive Cover (Power-Propelled Mowers) Check drive belt/ ulleys (Power.P ropell,_PMowe re} I/' 1_/ (p# IV# Check/Sharpen/Replace Blade I/3 Lubrication Chart Clean Sattery/RecharJrge IElectdc Start Mowers I V/ Check EnQine Oil Level Chan,qe Enqine Oil Clean Air Filter Inspect Muffler | v' ¥/, _/ I,/1 _. _ = M# Clean or Replace Spark Plug I1_ :replace Air Filter Paper Cartridge i,/2 1 - Change more often v*t,_mopetat_g L_xler a heavy bad or in h_gharnblentt_mpe ra_r_, 2 - Service more oft_t wh_ operating In dirty or dusty conditic_S 3 - ReplaoJ 1:4arielrr=>r a ofte_ when mowing in sa=xtyeoa, 4 * Ct_rge 48 hour8at end of w. LUBRICATION GENERAL RECOMMENDATIONS Tha wananty _n thislawn rnowerdoes nat coveritemsthat have been subjectedto operatorabuse or negligence_To receiveful valuefrom the warranty,operatormust maintainmower as instructedin this manual. Some ac_ustmentswil need to be made periodicalhtto properlymaintainyour unit. AI a(_usknentsin the Service and A(_ustmantssec_on of this manual should be checkedat least once each season. • Once a year, replacethe sparkplug, clean or replace air filter element and check blade for wear. A new spark plug and eleaxv_ewair filterelement assure proper air-fuel mixture and help your engine run better and last longer. • Fellowthe melntenenseschedule in tNs manual. BEFORE EACH USE • Check engine oil level, •Chack for loose fasteners. LUBRICATION Keep unit well lubricated (See "LUBRICATION CHART"). CHART (_ Wheel aduster )n eachwhee) (_) Brake spring bracket Discharge guard hinge pin (_ Handle bracket mounting pins (D Spray lubricant _) See "ENGINE" In Maintenance 10 sectlon. IMPORTANT: Do not oil or grease plastic wheel bearings. Viscous lubricantswill attract dust and dirt that will shorten the life of the serf-lubricating beadngs. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. PRODUCT SPECIFICATIONS ERIAL NUMBER: DATE OF PURCHASE: GASOLINE CAPACITY/TYPE: 1.5 QUARTS (UNLEADED REGULAR) OILTYPE (API-SF-SJ): OIL CAPACITY: SAE 30 (ABOVE 32°F); SAE 5W-30 (BELOW 32°F) 20 OUNCES SPARK PLUG (GAP: .045") BLADE BOLTTORQUE: CHAMPION RESISTOR TYPE RJ19LM4 35-40 FT. LBS. • The model and serial numbers will be found on a decal on the rear of the mower housing. Record both sedal number and date of purchase in space provided above. LAWN MOWER Always observe safety rules when performing any maintenance. TIRES • Keeptiresfree of gasoline,oil, or insect controlchemicalswhich can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards th_t may cause tire damage. (opposite sharp edge) is up toward the engine. 4. Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft. 5. Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise. • The recommended tightening torque is 35-40 ft. Ibs. IMPORTANT: Blade bolt is grade 8 heat treated. TO SHARPEN BLADE NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine. • The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower. • To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. BLADE CARE For best results, mower blade must be kept sharp. Replace bent or damaged blades. TO REMOVE BLADE 1. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. 2. Turn lawn mower on its side. Make sure air filter and carburetor are up. 3. Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. 4. Remove blade bolt by turning counter. clockwise. 5. Remove blade and attaching hardware (bolt, lock washer and hardened washer), NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged. TO REPLACE BLADE 1. Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned. 2. Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter. 3. Be sure the trailing edge of blade Crankshaft Key_ keyway Blade Blade bolt 11 shaft washer Trailing edge Blade adapter GRASS CATCHER (if purchased as an accessory) • The grass catcher may be hosed with water, but must be dry when used. • Check your grass catcher often for damage or deterioration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering. ENGINE LUBRICA'nON Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil's SAE viscosity grade according to your expected operating temperature. C ._ ._,o TEMpERA_JRE TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty. 1. Disconnect spark plug wire from spark plug and place wire where if cannot come in contact with spark plug. 2. Remove engine oil cap; lay aside on a clean surface. 3. Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine. 4. Wipe off any spilled oil from lawn mower or side of engine. 5. RII engine with oil. (See "ADD OIL" in the Operation section of this manual). 6. Reconnect spark plug wire to spark plug. .Io i_ lo 2o 3o 4o RANGE AWr _CIPATE[_ BEFORE NEX3" OIL CHANGE NOTE: Although multi-viscosityoils (5W30, 10W30 etc.) improve starting in cold weather, these muifi-viscoslty oils will result in increased oil consumption when used above 32°E Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of operation orat least once a year if the lawn mower is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level. _,ontainer 12 AIR FILTER Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter every 100 hours of operation or every season, whichever occurs first. Service air cleaner more often under dusty conditions. Do not wash air filter. TO CHANGE AIR FILTER 1. Remove the air filter by turning counterclockwise to the stop and pull away from collar. 2. Remove filter from inside of cover. 3. Clean the inside of the cover and the collar to remove any dirt accumulation. 4. Insert new filter into cover. 5. Put air tilter cover and filter into collar aligning the tab with the slot. 6. Push in on cover and turn clockwise to tighten. Collar Turn counterclockwise to remove Air filter cover to tighten MUFFLER Inspect and replace corroded muffler as it could create a fire hazard and/or damage. SPARK PLUG Replace spark plugs at the beginning of each mowing season or after every 100 hours of operatk)n, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" in Maintenance section of this manual. CLEANING IMPORTANT: For best performance, kiip mower housing free of built-grass and trash. Clean the underside of your mower after each use. _,CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come In contact with the spark plug. • Clean the underside ot your lawn mower by Scrapingto remove buiid-up of grass and trash. • Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life. • Keep finished surfaces and wheels free of all gasoline, oil, etc. • We do not recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life. 13 A CAUTION: Before performing any service and adjustments: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stooPed. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CuI"rlNG HEIGHT See "TO ADJUST CU'I-rlNG HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibilitythat objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced. DISCHARGE GUARD The discharge guard, attached to the discharge opening of your lawn mower, is provided to prevent the possibility of injury resulting from objects being thrown out of the discharge opening into the operator mowing position. If the discharge guard becomes damaged, it should be replaced. TO ADJUST HANDLE ENGINE ENGINE SPEED Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that engine is running too fast or too slow, take your mower to a Sears or other qualified service center for repair and adjustment. CARBURETOR The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle. f. Remove upper handle and all parts attached to lower handle. 2. Remove hairpin cotters from lower handle bracket mounting pin. 3. Squeeze lower handle in to remove it from mounting pins. 4. Turn lower handle over to raise or lower handle. 5. Squeeze lower handle in and position holes onto mounting pins on handle bracket. 6. Reassemble upper handle and all parts removed from lower handle. Your carburetor has a non-adjustable fixed main jet for mixture control. If your engine does not operate propedy due to suspected carburetor problems, take your lawn mower to a Sears or other qualified service center for repair and/or adjustment. IMPORTANT: Never tamger with the engine governor, which is factory set for the proper engine speed, Overspeeding the engine above the factory high speed scan be dangerous. If you think the engine-governed high speed needs adjusting, contact a Sears or other qualified service center, which has proper equipment and expedenoe to make any necessary adjustments. Lower "_ handle Rotate 14 _ Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. LAWN MOWER When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See "CLEANING" in the Maintenance section of this manual). 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts, bolts, screws, and pins are se_rely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary. 4. Touch up all rusted or chipped paint surfaces; sand lightly before painting. HANDLE You can fold your lawn mower handle for storage. 1. Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward. 2. Loosen upper handle mounting bolts enough to allow upper handle to be folded back. IMPORTANT: When folding the handle for storage or transportation, be sure to fold the handle as shown or you may damage the control cables. • When setting up your handle from the storage position, the lower handle will automatically lock into the mowing position. Lower handle Handle bracket Squeeze to fold_ control bar Fold Lower Fold backward position ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Also, experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. 1. Drain the fuel tank. 2. Start the engine and let it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. • Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer. ENGINE OIL Hairpin cotter Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual). 15 CYLINDER 1. Remove spark plug. 2. Pour one ounce (29 ml) of oil through spark plug hole into cylinder. 3. Pull starter handle slowly a few times to distribute oil. 4. Replace with new spark plug. OTHER • Do not store gasoline from one season to another. • Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems. TROUBLESHOOTING PROBLEM Does not start • If possible, store your unit indoors and cover it to give protection from dust and dirt. • Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form end will cause your unit to rust. IMPORTANT: Never cover mower while engine and exhaust areas are still warm. _,CAUTION: Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. CHART CAUSE CORREC_ON 1. Dirty air filter. 2. Out of fuel. 3. Stale fuel. 4. Water in fuel. 5. Spark plug wire is disconnected. 6. Bad spark plug. 7. Loose blade or broken blade adapter. 8. Control bar in released position. 9. Control bar defective. 16 1. Clean/replace air filter. 2. Fill fuel tank. 3. Drain tank and refill with fresh, clean fuel. 4. Drain fuel tank and carburetor and refill tank with fresh gasoline. 5. Connect wire to plug. 6. Replace spark plug. 7. Tighten blade bait or replace blade adapter. 8. Depress control bar to handle. 9. Replace control bar. TROUBLESHOOTING PROBLEM Loss of power CHART CAUSE CORRECTION 1. Rear of lawn mower housing or cutting blade dragging in heavy grass. 2. Cutting too much grass. 3. Dirtyair filter. 4. Buildup of grass, leaves, and trash under mower. 5. Too much oil in engine. 6. Walking speed too fast. Poor cut uneven 1. Worn, bent or loose blade. 2. Wheel heights uneven. 3. Buildup of grass, leaves and trash under mower. Excessive vibration 1. Worn, bent or loose blade, 2. Bent engine crankshaft. Starter rope hard to pull 1. Engine flywheel brake is on when control bar is released. 2. Bent engine crankshaft. 3. Blade adapter broken. 4. Blade dragging in grass. 1, Set to =Higher Cut_ position, 2. Set to "Higher Cut" position. 3. Clean/replace air filter. 4. Clean underside of mower housing. 5. Check oil level. 6. Cut at slower walking speed. 1. Replace blade. Tighten blade bolt. 2. Sat all wheels at same height. 3. Clean underside of mower housing. 1. Replace blade. Tighten blade bolt. 2. Contact a Sears or other qualified service center. 1. Depress control bar to upper handle before pulling starter rope. 2. Contact a Sears or other qualified service center. 3. Replace blade adapter. 4. Move lawn mower to cut grass or to hard surface. Grass catcher not filling (if so equipped) 1. Cutting height too low. 2. Lift on blade worn off. 3. Catcher not venting air. 1. Raise cutting height. 2. Replace blade. 3. Clean grass catcher. Hard to push 1. Grass is too high or wheel height is too low, 2. Rear of lawn mower housing or cutting blade dragging in grass, 3. Grass catcher too full. 4. Handle height position not right for you. 1. Raise cufting height. 17 2. Raise rear of lawn mower housing one (1) setting higher. 3. Empty grass catcher. 4. Adjust handle height to suit. Garantla ........................................................ 18 Reglas de Seguridad ............................... 18-19 Montaje .......................................................... 21 Operacibn ................................................ 23-25 Mantenimiento ............................................... 26 Prograrna de Mantenimiento ................... 26-29 Especificaciones del Prcducto ..................... 27 Servicio y Adjustes ....................................... 30 Almacenamiento ...................................... 31-32 Identificacioh de problemas .................... 32-33 Partes de repuesto ................................. 34-39 Orden de Partes ............................ Contratapa GARANT]'A UMITADA DE DOS .M_OS PAPA LA SEGADORA A MOTOR CRAFTSMAN pot dos (2) ahos, a partir de la fecha de cornpra,cuando esta Segado_ Craftsman se mantsnga, lulxkpe y afmeseg_n fas inalluccionaspara la o_ y al mantealrnientoe_ el m_,_uald_ _, Seam reparardgratistodo defectoen el materbJy la mano de obra. Si la Segadcra Craltsman se usa para finescomercialeso de arfiendo,esta garantla s(Y,ose ap]_ _ noventa(90) dfas a pa_r de la lecha de compra. Esta Garantla no cubre: • Articulosque se desgastan durante al uso normaltales como las cuchilbssegadoras total, _ adaptadoms de la cuchilla,las correas, los filtrosde alre y bs buj|as. • Reparadonesnecesadas deb_o al abuso o a la negligendadal operador, inolW6noY)se a I(_ cigt3e_alesdohladosy a la falta de rnantenirnlentodal equipo seg0n las instmcdonesque se incluyen en el manualdal due_o. EL SERVIClO DE GARANTI"AESTA DISPONIBLE al deriver la segadora a motor Craftsmanal Cen'we/ Departrnentode ServicioSears mas cercano en los Estados Unidcs. Esta garant[a se aplica solamente mien_as el Foducto este en uso en los Estados Unidos. Esta Garantiale oterga derechos le_ especificos, y puede cluetambidn tenga _ros dereohosClUe vadan de estado a estado. Sears, Roebuckand Co., Di817WA, Hoffman Estates, IL 60179 USA IMPORTANTE: Esta maquina cortadaora es capaz de amputar las manos y los manos y los pies y de lanzar objetos. Si no se observan las instrucciones de seguddad alguientes se pueden producir lesiones graves o la muerte. I.OPERACION • Antes de empezar, debe tamiliarizarse completamenle con los controles y el uso • No opere la segadora sin los respentivos correcto de ta rnaquina. Para esto, debe leer resguardos, las placas, el recogedor de y comprender todas las instrucciones que c6sped u otros aditamentos dise ados para aparecen en la rnaquina yen los manuales su proteccibn y seguddad. • Refi_rase alas instrucciones del fabncante de operaci6n. • No ponga las rnanos o los pies cerca o para el funcionamiento e instalacibn de accesodos. Use dnicamente accesorios debajo de las partes mtatodas. MantSngase siempre lejos de la abertum de la descarga. aprobados por el fabdcante. • Permita que solamente las personas • Detenga la cuchilla o las cuchillas cuando responsables que est6n familiadzadas con cruce por calzadas, calles o caminos de las instrucciones operen la m_quina. grava. • Despeje el _rea de objetos tales como • Parar el motor cada vez que se abandona piedras, juguetes, alarnbres, huesos, palos, el aparato, antes de limpiar la segadora o de remover residuos del tubo. etc. que pueden ser recogidos y lanzados pot las cuohillas. • Apagar el motor y asperar hasta que las • Aseg_rese que el drea no se hallen cuchillas est6n completamente paradas personas, antes de segar. Pare la m_quina antes de remover el receptor de hierba. si alguien entra en el area. • Segar solarnente co_ luz dal dfa o con una • No opens la maquina sin zapatos o con buena luz artificial. sandalias abiertas. Pbngase siempre • No opere la mdquina bajo la influencia de] zapatos s61idos. alcohol o de las drogas. • No tire de la segadora hacia atrds a menos • Nunca opens la maquina cuando la hierba que sea abso_utamente necesario. Mire est6 mojada. Asegdrese siempre de tener siempre hacia abajo y hacia detrds antes y buena traccibn en sus pies; rnantenga et mientras que se mueve hacia atrds. 18 mango fin'nemente y carnine; nunca cona. - Nunca remueva la tapa del depbsito de • Desconeotor el mecanismo de propulsiOn gasoline o agregue combustible con et aot6noma o el embrague de transmisiOn en motor funcionando. Permha que el motor las segadores que Io tienen antes de poner se entde antes de volver a pone en marcha el motor, combustible. No fume. • Si el equipo empezara a vibrar de una - Nunca vuelva a porter combustible en la manera anormal, pare el motor y revise de rn_quir_ en r_nlos cerrados. inrosdiato pare avenguar la cause. - Nunca almacene la rnaquina o el envase Generalmente la vibraciOn suele indicar que de combustible dentro de algon lugar en exists alguna averfa. deride hays una llama expuesta, tel come • Sieml_'e use gatas de sega_idad o an_eo_os la del calentador de agua. con protecelOn lateral cuando opere la • Nunca hags funcionar una rndquina dentro segadora. de un _ea ce_ada, |l. OPERACION SOBRE t.AS CUESTAS • Nunca hags ajustes o reparaclones Los accidentes ocurren con m_s frecuencia mientres el motor est,Len marcha. en las cuestas. Estos accidentes ocurron Desconecte el cable de la buJfa,y de_ a resb_ladas o ca{des, (as cu_es mant_ngalo a cierta distancia de _sta pare pueden resul_ar en graves leelones. Operar la prevenir un arranque accidental recortadora en cuestas requiere mayor • Mantenga las tuercas y los pemos, concentracion. Si se siente inseguro en una especialmenle los pernos del accesor_o de cuesta, no la recorle, la cuchilla, aprotados y mantenga el equipo HACER: en buenas condiciones. • Puede recortar a tray,s de la superficie de • Nunca rnanipule de forms indebida los la cuesta, nunca hacia ardba y hacia abaJo. dispositivos de seguddad. Controls Precede con extrema precauci6n cuando rsgularmente su funcionamisnto correoto. cambie de diracci6n en las cuestes. • Mantenga la n_quir_ lilxe de hierba, hojas • Renueva redes los objetos extrafios, tales u otras acumulaciones de desperdiolo. Limpie los derrarnes de aceite o combuscome guijarros, ramas, etc. tible. Permita que la n_quina se enfde antes •Debe prestar atenci6n a hoyos, baches o de almacenarla, pmtuharancias. Recuerde que la hierba alta • Pare • inspecoione el equipo el.Is psga aun puede esconder obstdculos. objeto. Repdrelo, si es neseesno, antes de NO HACER: hacedo arrancar. • No recorte cerca de pendientes, zanies o • En ningt_n case hay que regular la altura de terraplenes. El operader puede perder la las ruedas mientras el motor est_ en tracci6n en los pies o el equillbdo, R'=afcha, • No recorte cuestas demaelado inclinadas. • Los cornponentes del receptor de la hierha • No recorte en hierba mojada. La reduccibn van sujetos a desgaste, daffos y detedoro, en la tracci6n de la pisada puede causar qua pueden exponer las pades en resbatones. rnovimiento o perrnitir que objetos sean III°NII_IOS disparados. Contmlar frecuentemente y Se pueden producir accidentes tr_gicos si el cuando sea necesado sustituir con panes operader no Ixesta atencibn ala prasencia de aconsejades per el fabdcante. los nifios. A menude, los nifios se sienten •Les cuchillas de la segadora estdn aflladas atraidos per la rndquina y per la aotNidad de la y pueden cortar. Cubrir las hojas o Ilevar siege. Nunos suponga qua los ni_os van a guantes, y utilizar precauciones especialse permaneosr en el mlsmo lugar donde los vie cuando se efeotL_arnantenimiento sobre las per 01tima VeZ. mismas. • Mantenga a los ni_os alejades del drea de la • No _bie el aius_edel reoulador del motor siege y bajo el culdado estrioto de otra ni exosda st] velocidad. persona adults responsable. ABusque este simbolo qua sefiala las • Estd alerts y apague la m,iquina si hay hires {_recauc;ionesde seguridad de importencia. qua entree al drea. uiere decirilIATENCION!I!iilESTE • Antes y cuando este retrocediendo, mire ALERTOllt SU SEGURIDAD ESTA hacia atr_.s y hacla abajo para verifiosr si COMPROMETIDA. hay ni_os peque_os. _kADVERTENCIA; Siempre desconecte el • Nunca permits que los nifios operen la alarnbro de la bujla y pOngalo donde no pueds maquina. entrar en contaoto con la bujla, pare evitar el • Te_a ssncui_,do extr_ curricle so acerqu_ arranque per accidente, derante la a esquinas deeds no hay visibilidad, a los preparaciOn, el transports, el ajuste o cuando arbustos, _rboles u otros objetos qua se hacen reparaciones. pueden intederir con su lines de visi6n. _I_DVERTENCIA: Los bomes, ter_nales y IV. SERVICIO accesodos relatives de la baterfa contienen •Tenga cuidade extra al manejar la gasoUna y plomo o compuestos de plomo, produotos los demos combustibles. Son intlamab_esy qu_cos cor_ocidosen el Estado de California los gases son explosives. come causa de cdncer y defectos al nacimiento u otros dahos reproductivos. Lavar - Use solamente un envese eprobado. -t91as manes despu6s de manlpulados. _LADVERTENCIA: El tubo de escape del motor, algunos de sus constituyentes y algunos componentes del vehiculo contienen o desprenden productos quimicos conocidos en el Estado de California como causa de cancer y defectos al nacimiento u otros da_os reproductivos, Estos accesodos estaban disponiblsscuando se produjola segadora. No son fadlltados Ju.to al cortacesped. Est_n d'_por_blesen !a mayoda de las _endas de Sears yen los ceatrosde sewicio. La maycrfadelaslisndasSearstarnbi_n pueden mandara pedir pa_tss de mpuestopamusted, sties _ el nurnem del rnodelode su segadora. Algunosde estos accesodostal vez no se apliquena su segadora. RENDIMIENTO DE LA SEGADORA DESV].IUDO R DE RECORTES PARA SEGADORAS CON DESCARGA TRASERA JUEGOS PARA LA ACOLCHADORA PARA SEQADORAS CON DESCARGA RECOREDOR TRASERA [_ MANTENIMIENTO PARA SEGADORAS CON DESCARGA RECOREDOR LATERAL _1 ENV_ DEOASOMNA DE LA SEGADq )RA SlMENCIADORES CORREAS ESTABILIZADORES CUCHILLAS RLTROS DE CUCHILLA 20 DE AIRE BLIJfAS RUEOAS AOEITE DEL MOTOR Lea estas instrdcdones y este manual completaroente antes de tratar de montar u operar su segadora nueva. IMPORTANTE: Este cortacdsped viene SIN ACEITE O GASOLINA en el motor. Su segadora nueva ha sido montada an la f_brica con la excepcidn de aquellas partes que se dejaron sin roontar por razones de envio. Todas tas p_rtes como las tuercas, las arandelas, los pamos, etc., que son necesades para cornpletar el montaje hen sido colocadas an la bolsa de partes. Para asegurarse que su segadora funcione an forma segura y adecuada, todes las partes y los articulos de ferreterfe qua se monten tienen que ser apretados seguraroente. Use las herramientas correotas, como sea necesario, pare asegurar qua se apr_eten adecuadamente. PARA REMOVER LA SEGADORA DE LA CAJA DE CARTON 1. Reroueva las partes sueltas qua se inciuyen con la segadora. 2. Corte las dos esquinas de los extremos de la caja de cartbn y tienda el panel de1 extremo piano. 3. Reroueva todo el maledel de eropaque, excepto la cure entre el mango superior y d] inferior, y lacuRa qua sujete la barra de los control qua exige la presencia del operador junto con el mango superior. 4. Haga rodar la segadora hacia atuera de la caja de cartbn y revisela cuidadosamente pare verificar si todavla quedan partes sueltas adicionales. COMO PREPARAR SU SEGADORA PARA DESDOBLAR EL MANGO IMPORTANTE: Despliegue el mango con roucho cuidado pare no penizcar o deSar los cables de control. 1. Levante los mangos haste que la secci6n del mango inferior se asegure en su lugar, en la gosici6n pare segar. 2. Remueva la curia protectora, levante ta seccibn del mango superior haste su lugar an el mango inferior, y apdete arobas manillas del mango. 3. Remueva la cuba del mango que sujeta la barra de los control qua exige la presencia del oparador junto con el mango superior. El mango de ta segadora puede ajustarse seg_n le acoroode pare segar. Refl_rase e "AJUSTE DEL MANGO" an la Seccibn de Servicio y Ajustes de este manual. Barmde controlquesxJge[a,presenciadeloperador Mangosupedor '_ _t_Mango Levantm___Le, Inferior +..,_ Levantar - iclbnp_ara segar PARA INSTALAR LOS ACCESORIOS Su segadora fue enviada lista para usame como una acolchadora de cape vegetaJ. Pare convertirla de modo que puede ensecar, mfi6mse a "PAPA CONVERIR LA SEGADORA" en ta Seccibn de Operaci6n de eote 21 manual FAMILIARICESE CON SU SEGADORA LEA ESTE MANUAL DEL DUENO Y I-AS REGLAS DE SEGURLDADANTES DE OPARAR SU SEGADORA. Compare tas ilustracionesconsu segadora para familianzam---------------_e con la ub_ de los diversos oonlrdes y ajustes. Guarde este marcJalpara referenda on el luturo. Estos simbolos pueden apareser sobre su segadora o en la Ilteratura pmporclonada el producto. Aprenda y comprenda sus slgniflcados. ATrENCI6N 0 MOTOR MOTOR R_°IDO LENTO ESTRANGU COM- ACEITE con PEUGRO, GUARDE LAS Barra de control que exige la presencia del operado( Cord6n arrancador gasolina Filtm de a]re Tapa del deposito de aciale del motor con vadlla indicadera de Cebador Caja Protecci6n la descarga IMPORTANTE: Este cortac6sped viene SIN ACEITE O GASOLtNA en el motor. Ajustador de la ruede (en cada rueda) CUMPLE CON LOS REQUISrros DE SEGURIDAD DE LA CPSC Las segadoras a motor, que se conducen desde la parte de atrds, rotatorias, Sears, cumplen con los estdndares de segu_idad dal American National Standards Institute y de la U.S. Con. sumer Product Safety Commission. La cuchilla gira cuando el motor est_ funcionando. Ba_-a de control que exlge la presenda del Cebador - bornbeacornbus'dbie adicionaldesde el operador - 1]eneque sqetarse abajo, junto con al carburad_ al cilindm para uso cuando se _, para hacer arrancar el motor. Sudltela necestta hacer _r un motor ldo. para parar el motor. Corddn arrancador- se usa para hacer anancar almotor. 22 Laoperacibn decualquier segadom puede hacer que salten objetos ex',ra_os dentin PARA CONVERTIR LA SEGADORA Su segadora es enviada para usarse corno acolchadora, Para convertida a una operacion de ensacado o de descarga: • Levante la proteccibn contra la descarga y remueva Ia plancha acelchadora, • Ahora la segadora se puede usar con descarga lateral o se le puede adjuntar el recogedor de cdsped opcional. • Para volver a la operacibn de acolchamiento, sirnplemente vueiva a instelar la plancha acelchadora segOn se rnuestra. -le sus ojos, Io que puede pmducir daSos graves en 6s_os. Siernpre use anteojos de seguridad o pmteccibn para los ojos rnEentras opere su segadora o cuando haga ajus_es o reparaciones. Recomendarnos una mascara de seguddad de visi6n amplia, pare uso espejuelos o anteojos de seguridad estandarte. COMO USAR SU SEGADORA VELOClDAD DEL MOTOR La velocidad del motor se estableci6 en la fdbdca para un rend_mientobptirno. La veloeldad no se puede ajustar. CONTROL DE ZONA DEL MOTOR _=PRECAUCI(_N: Las regulaciones fedemles exigen que se instale un control para el motor en esta segadora para reducir a un minimo el desgo de lesionarse debido el contacto con la cucl_lta. For ningdn rnotivo irate de eliminar la funci_ del control del operador. La cuchilla gin cuando el motor estd funcionando. • Su segadora viene equipada con una bana de controles que exigen la presencia del operador, Io que requiere que el operador est8 detras del mango de la segadora para hacerla arrancar y operada. PARA AJUSTAR LA ALTURA DE CORTE A PRECAUCKSN: No haga funelonar su segadora sin ta plancha acolchadora o el tapbn aprobados en su lugar, o sin el desv_ador de recortes, o sin el recogedor de cdsped, aprobados, en su lugar, Nunca irate de opera,"la segadora cuando se ha rernovido la puerta trasera o cuando est_ un poco abierta. Levante las ruedas para el corte bajo y baje las ruedas para el corte alto., ajuste la altura de code para que se acornode a sus requisitos. La posicion del medio es la mejor para la mayoria de los c_spedes. • Pare cambiar faaltura de corte, empuje la palanca del ajustador hacia la rueda. Mueva la rueda hacia ardba o hacia abajo de modo que se acornode a sus requisitos. Aseg_rese que todas 1as medes queden iguelrnente ajustadas. AV|SO: El ajustador esta correctamente colocado cuando las orejas de la placa estdn insertadas en el agujero del mango. Tambi_n, los ajustes de 9 posiciones (si equipado) perrniten que el mango pueda set rnovido entre ]as orejas de la placa. Para un codealto,bale 1asruedas Para un code bajo, levar)te _-_(_ Abertura del bastJdor Ganchos Plancha acolchado_a Oregas ej_s ngo de la placa las ruedas 23 Varllla de articulacl_n ANTES DE HACER ARRANCAR EL MOTOR AGREGUE ACErFE Su segadora foe enviada sin acalte en el motor. El motor puede contener 20 oz. de acalte, para el tipo y la calidad yea "MOTOR" en la secci6n de las Mantenimiento en este manual. 1. AsegOrese que la segadora est6 nivelada y que el _rea alrndedor del deposito de aceffeest_ limpia. 2. Remueva Ta tapa de1 dep6s:_o de acalte dal motor y rallene hasta la linea de Ileno en _sta. Vacle el aceite lentamiente. No Io liens dsmasiado. AVISO: Permita qua el acalte se aciente bien en el motor para una lectura exacta. Para leer el nival apropiado, apriete la tapa del relleno dal aceite de motor, rernuevala para leer la vadlla medidora del aceite. 3. Vualva a instalar la tapa del depbsito del acette y apridtala. • Revise el nivel del acalte antes de cada use. Agregue aceite si es necesano. Liens hasta la Iinea de Ileno en la varilla indicadora de niveL • Cambie el aceite despuds de 25 horas de oparaci6n o una vez por temporada. Puede necesitar carnbiar el aceite rods a menudo cuando las condiciones son polvorosas o sucias. AGREGUE GASOLINA • Liens el estanque de combustible. Use gasolina regular, sin plorno, nuava y lirnpia con el minimo de 87 octanos. (El uso de gasolina con plomo aurnentar_ _os dep6sitos de 6xido de plomo y carbono y se redualrd la dumci6n de la vdlvula). No mezcle el aceite con la gasolina. Pard asegurar que la gasolina utilizada sea fresca cornpre estanques los cuales puedan ser utilizados durante los pdmeros 30 dias. _I, ADVERTENCIA:La expedencia ha indicado que los combustibles mezclados con alcohol (conocides como gasohol, o el uso de etanol o metanol) pueden atraer la humedad, la que conduce a la separacibn y formacibn de _cidos durante el almacenamiento. La gasolina acldica puede dafiar el sistema del combustible de un motor durante el almacenamiento. Para evitar los problernas con al motor, se debe vaciar el sistema del combustible antes de guardarlo pot un periodo de 30 dlas o rnds. Vacie el estanque dal combustible, haga arrancar el motor y hdgalo funcionar basra que las IIneas del combustible y el carburader queden vaclos. La prbxima temporada use combustible nuevo. Vea las instnJcciones para El Almacenamiento para m&s informaci_. Nunca use produotos de limpieza para el motor o para el carburador en el estanque dal combustible puss se puaden producir daflos permanentes. _Ih.PRECAUCK_)N: Liens hasta la parle infedor del cuallo de relleno del estanque de gasblina. No Io liens demasiado. Lirnpie el aceite o el combustible derrarnado. No almacene, derrarne o use gasolina cerca de una llama expuesta. Tapa del deposito de aceite Tapa del deposito PARA HACER ARRANCAR EL MOTOR NOTA: Debide a [as capas protectoras del motor, una cantidad pequeSa de hurno puede estar presents durante el uso ialcial del producto y se debe considerar normal. 1. Para hacer atTancar un motor trio, empuje el cebador ltes (3) veces antes de tratado. Empuje firmemente. Este paso normalmente no es necesario cuande se hacs arrancar un motor qua ya ha estado foncionando por unos cuantos minutos. 2. Sujete la barra de controles que exigen la presencia dal operador abajo en el mango y tire el mango del arrancador rdpidamente. No permita que el cordc_ndel arrancador se devuelva abruptamente. PARA PARAR EL MOTOR • Para parar el motor, sualte la barra de contmles que exigen la presencia del operador. AVISO: En clirnas rnds trios puade qua sea necesade repatir los pasos del cebado. En climas rnds calurosos el cebar demasiado puede producir el ahogo y el motor no va a arrancar. Si se ahoga el motor espare unos cuantos rninutos antes de tratar de hacede arrancar y no repita los pasos dal cebade. 24 CONSEJOS PARA SEGAR • Bajo ciertas condiciones, tal como c_sped muy alto, puede ser necesado el elevar la altura del corte para reducir el esfuerzo necesano para empujar la segadora y para evitar sobrecargar el motor, dejando montones de recortes de crisped. Puede que sea necesario reducir la velocidad del recorddo y/o haga funcionar la segadora sobre el area pot segunda vez. • Para un corte muy pesado, reduzca el ancho del corte pasando parcialrnente pot encima del lugar anteriormente cortado y siegue lentamente. • Para un rnejor ensacado del c8sped y para la mayor;a de las condiciones de corte, la ve_ocidaddel motor debe aJustarse a la posici6n de rdpido. • Si las segadoras de descarga lateral cortan en una direccidn contrada alas rnanillas del reloj, si se em-pieza en la parte de afuera del drea que se va a cortar, se repartirdn los recortes del c_sped en forma m_s pareja y el motor se cargard menos. Para evitar que los recortes caigan en los senderos, en ias flores, etc., haga los pdmems cortes en la direccibn de las maniHas del reloj. • Los poros en los recogedores de cesped de tela pueden Ilenarse con rnugre y polvo con el uso y los recogedores recaudar_in menos cesped. Para eVltar dsto, rocie el recogedor con la rnanguera de agua, regularmente, y dejelo secarse antes de CONSEJOS PAPA SEGAR Y ACOLCHAR IMPORTANTE: Pare obtener el mejor rendimiento mantenga la caja de la segadora sin acumulacion de cesped y basura. Vea =LIMPIEZA" en ]a seccion de Mantenimento de este _RU_. • La cochipa acolchadera especialva a volvera cortar los recortesde crisped muchas veces, y los reduce en tarnafio,de modo que si se caco en el c_sped se van a cispesat entre _ste y no se van a notar. Tan'bidn, _ cdspedacolchade se va a deshacer rdpidamer_eentregando substanciasnutr_tivaspara el cesped. Siempre aco_dnecon la velocidad del motor (cuchilla) rnds alta, pues as[ se obtend_ la mejor acck_ de recorte de las ¢uchill_. • Evite cortarel cdsped_ est6 mojado. B c_oed mojado l_endea format rnontor_ e interfiem con la acci6nde acolchado.La mej_ hora para segar el o_sped es tempranoen la tarde. A esa hora dstese ha secade y el _a recidncortada no quedard expuesta al sol directo. • para oMener k_smejoms msultados, ajuste la altura del cone de la segadora de mode que 6sta code s_amente el tercio supedorde las hojas de cdsped. En el caso de qua el cesped haya creddo dernaslado, puede set necesa_ el elevar la attura d_ corte para reducir el eeluerzo necesario para ernpujar la segadera y para evitarsobrecatgar el rcotor,dejando rnontonesde recortes de cdsped. Pamun acolchamiento muy pesade, reduzca el ancho del corte pasando por encima del lugar antenormentecor_adey siegue k_tameme. • C_tos _pos de cesped y sus condicio_es pueden exJgirque undrea tenga que set acolchada por segunda vez para esc_x_ completamer_elos recortes.Cosndo se haga el segundo corte, siegue a_avesado o en forma perpendoJlara la pasada del primer corte. • Carnbie su patrbn de corte de semana a _. Siegue de node a sur una sernana y luego cambie de este a ceste la prbxJma semana. Esto evitar_que el cdsped se enrede y osrd_ie de clrecci6n. usarlo. • Mantenga la parte superior del motor, alrededor del arrancador, despejada y sin recortes de cesped y paja. Esto ayuderd el flujo del aire del motor y extender& su duracibn. r 25 ,,_._k_ _; Max. 1/3 PROGRAMADE MANTENIMIENTO LLENELASFECHASA MEDIDA QUECOMPLETE SUSERVJCIO REGULAR FECHASDE SERVICIO Revlsar slhaysu_dore$ sueltos Llmpiar,'lnspeccionar el recogedor de t/ Llmp_w la segadora L k'*' I,/ at debajo de la ¢_Jbler_ de Hatra_.s- Lm_l_6n (segadoras conIx_erpropulsor) Revtsar !as correas y las pdeas If Impul- I_ sadasIse_adoras conpoderpropulsor) Revisar _af JJSF/CBII_[Bt _acuchilla II_ 3 Tabla de lubrlcad_n 11_ fl_ fJ ql_4 LimplN la baterhdrecarg&r (=eg_ora$conartanque electrico) Revi_r el nivel del aceit e Garnbiar el _eite _l # del motor ll_t .2 Llmplar el filtro de aire Inspecdcnar Umpis, _g el s_lenclador _cambiar la bujia I1_ Cambiar e_ cartucho de papal del filtro I1_ 2 dealre 1 - _r rPAsa mlmudo cua_do se opera bajo ca_ga pesad a o en arrbientes con alias tsmperat urns. 2 - D= servtck_m_ arr, enudo cuando se epere en condir.x_ne6s_aas o pok,orosas 3. Caillble las cudlillas rndsa rnengdo cuando sJegueml teCTenOarenoao 4 - Cargsr por 4B hot_s al tin de I_ temporada. RECOMENDACIONES GENERALES La garantla de esta se0adom no cubm los artlc_os que ban estadoSL_etosal abuso o a la r_0r_r_a d. q_r. Para recibirtodo ei valor de ta garantia, et q_rador tiene que mantenerb segadom segLinIz_ instrucaone_descritas en este manual. Hay algun_ ajustes que se tienen cluehacer en forma pedbciicapara poder mantenersu un'dad adecuadamente. Todoslos ajustesen la secci_nde Servicioy Ajustes de este manual tienen que ser revisados p_r b rnenosun vez p_r cada tempomda_ • Una vez al aSo, carnbiela b_fa, limpie o camb_ el elemento de111fifo de aim y revise s_b cuchi_ estd desgastada.Una bujfa nueva y un elenento de]film de aim limpio/nuevoa.seguran la mezda de aire-combustib_eadecuada y ayudana que su molor fu_ mejor y que dure rn_. • _ el programa de mantenimientoen este n'=3nLl_. ANTES DE CADA USO • Reviseel niveldel aceite del rn_or. • Revise si hay sujetadoms sue_os. LUBRICACI_)N Mantenga la unidadbien lubricada(yea I_ "TABLA DE LUBRICACI(_)N"). TABLA DE LUBRICACI(_N (_ Aceitedelmotor L'_ Puntal de resorte del freno Ciavija de la articulacion de la descarga rueda (_) Clavija de montaje del punlal de1 mango (_) Rocll _1lubrlcante (_) Veu "MOTOR" en la =ecclon de Mantenlmiento 26 IMPORTANTE: No aceite o engrase los rodamientos de la rueda de plastico. Los lubdcantes viscosos atearan polvo y mugre, Io acortara la duracion de los rodamientos autotubdcan_es. Si ctee que tienen que lubrtcarse, use Iosamente un lubricante tipo crafilo, de polvo seco, en lorma rnoderada. ESPECIFICAClONES NOMERO FECHA DEL PRODUCTO DE SERIE: DE COMPRA: CAPACIDADYTIPODEGASOLINA: 1.5 CUARTOS TIPO DE ACEITE IAPI-SF-SJ): CAPACIDAD DE ACEITE: SAE 30 (sobre 32°F);SAE 20 ONZAS BUJ{A IABERTURA: .045" I CHAMPION TORSION DEL PERNO DE LA CUCHILLA: (REGULAR SIN PLOMO) 5W-30 Idebaio 32°F) RJ19LM4 35-40 FT. LBS. • El numSro del nodelo y el de serie se encuentran en ta calcomania adjunta a la parle trasera de la caja de la segadora. Debe registrar lanto el numdm de sede come la fecha de compra y mantengalos en un lugar seguro para relencia en el futuro. SEGADORA Siempre observe las reglas de seguridad cuando haga el mantenimiento. LLANTAS • Manteega las Ilantas sin gaso]ina, aceite o substancias quimicas para conlrol de insectos que pueden daSar la gorna. • Evite los locones, las piedras, las grietas pmfundas, los objetos afilados y otros peligros que pueden da_ar alas Ilantas. CUIDADO DE LA CUCHILLA Para obtener los rnejores resullados, la cuchilla de la segadom tienen que mantenerse afilada. Carnbie la cuchilla doblada o daSada. PARA REMOVER LA CUCHILLA 1. Desconecte el elambre de la buj[a y pbngalo en dende no pueda entrar en conlaclo con dsta. 2. Haga descansar la segadora en su lado. Asegtirese que el filtm de airs y que el carbumdor queden mirando hacia ardba. 3. Use un blegue de madera entre la cuchilla y la caja de la segadora para evitar que la cuchiUagire cuando se le quite el perno. AVISO: Proteja sus manos con guanles y/o envuelva la cuchilla con una tela gruesa. 4. Remueva el pemo de la cuchilla girdndelo en el sentido contredo en que giran las manillas del reloj. 5. Remueva la cuchilla y los arliculos de ferreteria edjuntadoms (el pemo, la arandela de seguddad y la amndela endurecida). AV|SO: Rernueva el adaptador de la cuchilla y revise el cubo interior de la ranura del adeptador de la cucNIla. La ranum tiene que estar en buenas condiciones para que funcione en lorma adecuada. Cambie el adeptador si estd deSade. PARA CAMBIAR LA CUCHILLA 1. Ponga el adaptador de la cuchilla an el ciguel_al del motor. Asegiirese que la ranura del adaptader y que el chavelem del ciguehal esl_n alineados. 2. Ponga la cuchilla en el adaptador de _sta alineando los dos (2) agujeros en la cuchilla con las salientes elevadas en el adaptador. 3. Asegdrese de que el borde de salida de la cuchilla (opuesto al horde afilado) estd hacia arriba hacia el motor. 4. Inslale el pemo de la cuchilla con la arandela de seguiiqad y la arandela endurecida en el adaptador de la cuchilla y el cigue5al. 5. Use un bloque de medera entre la cuchilla y la caja de la segadora y apriete el pemo de la cuchilla girdndelo en el sentido en que giran las manillas del mloj. • La torsibn para apretar recornendada es de 35 - 40 pies libras. IMPORTANTE: El pemo de la cuchilla es clase 8 tmlade a calo. PARA AFILAR LA CUCHILLA AVISO: No recomendamos el afilar la cuchilla - pero si Io hace, asegLlrese de que quede balanceada. Se tiene que tener cuidado de manteneda balanceeda. Una cuchilta que no estd belanceada va a producir eventualmente dar_o en la segadora o en el motor, • La cuchilla puede afilarse con una lirna o en una rueda rectificadora, No Irate de afil_la mientras se encuentra en la segadora. • Para revisar el balance de la cuchilla, clave un clavo en una riga o en la pared. Deje alrededor de una pulgada de un clavo recto expuesto. Ponga el agujem central de la cuchilla sobre la cabeza del clavo. Si la cuchilla estd balanceade debe permanecer en la posici6n horizontal. Si cualquiera de los extremos de la cuchilla se rnueve hacia abajo, afile el extremo pesado hasta que Elsta quede balanceada. Adaptadorde la cuchllla Ranu_._. Anindelade seguddad Cuch_lla Chavetemdel c!guenaJ Arande_ Pernoerldt_ecldl guenal de la cudlllla loldlt de sallda, Adaptaderde la cuchilla 27 RECOGEDOR DE ClaSPED (Si compradocomo un accesono) • El recogedorde c_ded puede ser rociadocon el agua de la manguera pero _ene que estar seco cuando se vaya a usar. • Revise su recogedor de c_ a menudo para verificar._esta daSade o detenorade Se va a desgastar conel uso n_Tnal. Si se necesitacami0iarel recogedor,cambielo solarnentepor uno que sea apmbado p_ el fabr_ante. De el nOmerodel modelode la segadera c_nde Io ordene. MOTOR LUBRICACK_N Use solamenteace_ de detergente de car_ad dasif_do con la elasifx_u_k_ SF-SJ de servloloAPI, Selecdone la celldedde vi_ SAE seg_ su terr_ra de opemd6n esperada. PAPA CAMBIAR EL ACEITE DEL MOTOR AVISO: Antes de inclinar la segadora para drenar el aceite, drene el tanque de combustible haciendo correr el motor hasta que el tanque estd vacio. 1. Desconecte el alarnbre de la bujla y pbngalo de rnodo que no pueda entrar en contacto con esta 2. Rernueva la tapa del depdsito del aceite; d_jela a un lado en una supefficie limpia. 3. Incline la cortadora de c_sped por este costado tel corno se muestra y purgue el acelte en un recipiente idbneo. Mueva la segadora de atr_s para adelante para remover todo el acelte que se haya quedado atrapado dentro del motor. 4. Umpie todo el aceite derramado en la segadora yen el lade del motor. 5. Rellene el motor con acelte. (Vea =PAPA AGREGAR EL ACEITE" en la seccibn de Operaci6n de este manual.) 6. Vuelva a conectar el alambre de la bujla a esta. AVISO: A pesar de que los aceites de multMscosidad(5W30, 10W30, etc.) mejcran el arranque _n clima fdo, estc6 aceltes de rnultivisc_ded van ha aLrnentar el consumode aseite cuandose usan en temperaturassobre 32° F. Revise el niveldel aceite del motorrr_s a rnenudo,para evitarun posibleda_o en el m_or, debido a epe no _ene sufielenteaceite. Cambie el acelte despu_s de 25 horas de operack_no por lo menos ureavez al ar3osi la segadera se otiliza menos 25 horas el a,5o. Revise el nivel del aceite del craterantss de ananc_ el motor y despuds de cada cloco (5) horas de usocontinuade.Apriete el tapbn del aceite en fom_asegura cade vez clue revise el nivel del acsite. 28 SILENCIADOR lnspeccione y cambie el silenciador si estd colToldo puede producir un peligro de incendio y/o daSo. BUJ{AS Cambie las bujias al comienzo de cada _emporada de elega o despu8s de cada 100 horas de operaci_, Io que suceda primero. El tipo de bujla y el ajuste de [a abertura aparecen en "ESPECIFICACIONES DEL PRODUCTO" seccibn de este manuel. LIMP|EZA IMPORTANTIE: para obtener el mejor rendimineto, mantenga la caja de la segadora sin acumulacion de cesped y basura. Limpie la parte de abajo de su segadora despues de cad_. uso. _=PRECAUCK_N: Desconecte el alambre de la bujla y p6ngalo en cionde no pueda entrar en contaoto con 6sta. FILTRO DE AIRE Su motor puede sulrir averlas y funcionar de manera incorrecta con un filtro del aire sucio. Sustituirel papel del cartucho una vez al a£1oo tras 100 horas de funcionamiento, m_s a menude si se otiliza en condiciones de sueledad y polvo particulares. No lave el filtro de a_re. PARA CAMBIAR EL RLTRO DE AIRE 1. Remueva el fiitro de aire girdndelo en el sentido contrario en que giran las mani]las del reloj, hasta et tope, y retirelo del collar. 2. Remueva el filtro de la parte intedor de la cubiarta. 3. Limpie la parte interior de la cubiarta y el collar para remover toda acumuiacibn de mugre. 4. Inserte el fi]tro nuevo an la cubierta. 5. Ponga la cubiarta del fiitro de aire dentro del collar alineando la oreja con la ra,nura. 6. Empuje la cubiarta hacia ade_ro y g{reLa en el sentido de las manillas del reloj p_m apretada. Abrazadeta GIre en el senttdo corittarlo a [as rnanlllas del rek,I para renlover GIre en el [as manillas del reloj para apretar • Haga descansar [a segadora en su lade. AsegOreseque el flltrode aim y que el catouradcr queden mirando hac'_ arriba. Uml_ la parle inferiorde su segadora _[a para remover [a acumulaci6nde cesped y basura. • Limpie el motor a menudo pata evitarque se acumule [a basura. Un motortapado funciona rn_scel[antey se acorta su duradbn. • IV[antengalas superrlcie_pulidasy [as nJedes sin gasolina,acelte, etc. • No recomendemosel uso de una manguera de jard[npara limp[arla segadera a _ qu_ el sisterna eldctrico,el silendador, el fi_ro de elm y el carburadorest_n ta_ para evilar que les enlm el agua. [] agua en el motcr puedeacortar la duracidnde este. 29 _=PRECAUCI6N: Antes de dar cu_Jquier servicio o de hacer ajusles: 1. Suelte la barm de control y pare el motor. 2. Aseg_rese que la cuchilla y que todas las partes rnovibles se hayan detenido completamente. 3. Desconeote el alambre de la bujia y pbngolo en donde no pueda entrar en contaclo con _sta. SEGADORA PARA AJUSTAR LA ALTURA DE CORTE Vea =PARA AJUSTAR LA ALTURA DE CORTE* en la seccidn de Operaci6n de este manual. DESVIADOR TRASERO Se propomiona un desvtador trasero, adjunto entre las ruedas tmsems de su segadora, para reducir a un minimo la posibilidad que objetos sean lanzados hacia afuera de la parte trasera de la segadora, en la posicLbnen dande se encuentra el operador. Si se da_a el desviador debe cambiarse. PROTECCI6N CONTRA LA DESCARGA Se proporciona ur_ protecciSn centre la descarga, adjunta a Eaabertura de descarga de su segadora, para evitar la posibilidad que objetos sean lanzados hacia afuera de la abertura de descarga, en la posici6n en donde se encuentra el operador. Si se deSa la protecdc_ncontra la descarga debe cembiarse, PARA AJUSTAR EL MANGO F_Jmango puede set montado a una posicibn alia o baja. Los agujeros de montaje en el mango inferior estbn fuera del centre para levantar y bajar el mango. 1. Remueva el mango supedor y todas las parles atadas al mango inferLor. 2. Remueva las clavijas de horquilla de _a clavija de montaje del puntal del mango. 3. Apreite el mango infer_orhacia denlro para removedo de las clavijas de montaje. 4. Gire el mangc inferior per encima para levantar o bajar el mango. 5. Vuelva a mantar las cl_.vijas de horquilla per encirna de las clavijas de montaje. 6. Vualva a montar el mango super;or y todas las partes removidas del mango inledor. MOTOR VELOClDAD DEL MOTOR La veloeldad del motor ha side ajustada en la fabrica. No trate de aumentar la velocidad del motor pues se pueden produdr lesiones personales. Si cree que el mo_or estd funcionando demasiado rdpido o demasiado lento, Ileve su segadora a mas con su ceotro de servicio Sears o con un otro centre de servicio cualificado. CARBURADOR Su carburador tiene un chorro principal fijo no ajustable para controlar la mezcta. Si su motor no estd funcienando en fonna adecuade debido a problemas que se sospecha vienen del carburador, neve su segadora a contacto con su ceotro de servicio Sears o con un otro centre de servicio cualificado para repararla y/ o ajustada. IMPORTAWrlE: Nunca manipule el regulador del motor, el que ha side ajuslado en la fdbrica para [a velocidad del motor adecuada. Puede ser peligroso hacer funelor_arel motor a ana velocided per sobre el ajuste de alta valocidad de la fdbrLca.Si cree que la velocidad alta regulada del motor necesita ajuste,cantacto con su cenfro de servicio Sears o con an otto eenfro de servicio cualificado, el que cuenta _on el squipo adecuado y la expedencia para hacer los ajustes necesarios. 3O Inrnediatamente prepare su segadora para el alrnacenamiento al final de cada temporada o si la unidad no se va a usar por 30 dias o exJgela presencladel Barra de c°ntr°l qu_el'_ operado_ Doblar • (_,._,_, hacla /. mas. SEGADORA Cuando se va a guardar la segadora pot cierto periodo de tiempo, llmpiela cuidadosamente, remueva toda ta rnugre, la grasa, las hojas, etc. Gu_rdela en un drea limpia y seca. 1. Limpie toda la segadora (Vea "LIMPIEZA" en la secci6n de Mantenimento de este manUal). 2. Lubrlquala segOn se muestra en la seccibn de Mardenimento de este manual. 3. Asegdrese de qua todas las tuercas y clavijas y todos los pemos y tomi,os estSn apretados en foma segura. Inspeccione laspartes que se muaven para verificar el estdn da_adas, quebmdas o desgastadas. C&mblelas si es necesario. 4. Retoque todas las supedicies qua est_n oxidadas o con la pintura picada; use una lija antes de pintar. MANGO Puede doblar el mango de su segadora para almacenada. 1. Apriete los extremos inferiores del mango inledor entre sr hasta que el mango infedor quede separado del puntal del mango, luego mu_valo hacia adelante. 2. Suefie los pemos de montaje del mango suped_ Io suficiente como para permitir qua el mango supedor se pueda doblar hacia atr_.s. IMPORTANTIE: Cuando doble el mango para el almacenmiento o el transporte, asegurese que )o dohle segun se muestra o pueda danar los cables de control. • Cuando prepare sus rna_os a parer de la posick_ de elmacenamiento, el mango infedor autorr_ticameote se aseguFa_ en la posick_ pard segar. Apde_ pam dob_ Ixxquilla Mangos_Jpedor para V Infedor != •"-_' "3"" "11_ \\\_"_--_;-"--. _a X\\z/ x MOTOR SISTEMA DE COMBUSTIBLE IMPORTANTE; Ee importante evitar que se formen depoeltos de coma en partes fundamenteles del sisternade combustible tales como el carburador, el flltdm del combu_ble, la mangura del combustible o en el estanque durante el almacenamiento. La ecpedencia tambien endica que los combustibles mezclados con alcohol (conocido come gasohot o que tienen etanol o metanol) Pueden atraer hurnedad, Io que conduce a la separacion y a la formaci6n de acidos durante el almacenamiento. La gasolina acida puede danar el sistema de combustible de un motor durante el peddo de almacenamiento. 1. Drone et estanque de combusfible. 2. Haga arrancar el motor y d6jelo funcionar hasta que las lineas del combustible y el carburador estSn vaclos. • Nunca use los productospara limpieza del carburadoro del motor en el estanque de coml_tible pues se puaden pmdudr daSos permanentes. • Use combustiblenuevo la pr6xima temporada. AVISO: El estabilizador de combustible es una afiemativa aceptabte para reducir a un mlnimo la formaci6n de depbsitos de goma en el combustible durante et perlodo de almacenamiento. Agmgue establlizador a la gasolina en el estanque de cornbusfible o en el envase para el almacenamiento. Siempre siga [a proporcibn de rnezcla qua se encuentra ell el envase del estabilizador. Haga funcionar el motor por 1o menos 10 minutos despu6s de agregar el estabilizador, para permitir que este Ilegua al carburador. No drene la gasolina del estanque de gasoUna y el carburador si se estd usando estabilizador de combustible. 31 ACEITE DEL MOTOR Drene el aceite (con el motor caliente) y c&mbieto con aceite de motor limpio. (Vea =MOTOR" en ta secci6n de Mantenimento de este manual,) CIUNDRO 1. Remueva la bujia. 2. Vacfe una onza (29 ml) de acelte a travSs del agujero de la bujfa en el cilindm. 3. Tire la manilla de arranque lentamente unas cuantas veces para distr_buirel aceite 4 Vuelva a montar la nueva bujla OTROS • NO guarde la gas_lina de una temporade a la olra. • Cambie el envase de la gasolina el se empieza a oxidar. La _idaci6n y/o ta mugre en su gasolina produciran problemas. IDENTIFICACl6N A, PRECAUCI6N: Nunca almacene la segadora con gasolina en el estanque dentro de tm ediflcio en donde los gases pueden alcanzar una llama expuesta o una chispa. Permita que se enfrle el motor antes de elrnacenada en algOn recinto cerrado. CAUSA CORRECCK_N 1, 2. Filtro de aire sucio. Sin combustible. 1. Umpie/cambie el filtro de aire. 2. Llene el estanque de ccrnbustible. 3. Combustible rancio. 3. 4, Agua en el combustible. 5, Alambre de la bujla desconectado Bujfa mala Cuchilla suelta o adaptador de la euchilla quebrado 6, 7, 8. 9. Falta de fuerza IMPORTANTE: Nunca cubra la segadora mientras el motor y las areas de escape todavia estan calientes. DE PROBLEMAS PROBLEMA No arranca • Si es posible guarde su unidad en un recinto cerrado y c_brala para protegeda corrtrael polvo y la mugre, • Cubra su unidad con un forro protector adecuade que no retenga la humedad. No use pl_stico. El pl&stico no puede respirar, Io que permite la forrnacibn de condensaci6n, Io que producir_ la oxidaci6n de su unidad. Barra de control en la posici6n suelta. Barra de control defectuosa. 1 Cuchilla desgastada doblada o suetta. 2. Altura de las medas dispareja. 3. 4. Velocidad del motor lenta. Acumulacibn de cSsped, hojas o basura debajo de la segadora. 5. Demaslado aceite en el motor. 6. Velocidad de recorddo dernasiado r_pide. Drene el estanque y vuelva a Ilenado con combustible limpio y nuevo. 4. Drene el estanque de combus tible yet carburador y vuelva a Ilenar el estanque con gasolina nueva. 5. Conecte el alambre a la bujla. 6. 7. Cambie la bujla. Apdete el pemo de la cuchilla cambie el adaptador de la cuchilla. 8, Presione la barra de control hacia el mango, 9. Cambie la barra de control. 1 Ajuste a la posici6n de "Code m_s elto." 2, Ajuste a la posicibn de =Corte m_s altO." 3. Umpie/cambia el flltro de aire. 4. Lirnpieta parte inferior de ta caja de ta segadora. 5. Revise el nivel del aceite. 6. Corte a una velocidad de recorddo m&s lenta. IDENTIFICACI6N DEPROBLEMAS PROBLEMA CAUSA CORRECCl6N Malcorte1. Cuchilla desgastada, doblada1. Cambie la cuchi[la. Apriete el disparejo 2. Vibracl6n exceslva 31ficll de empuJar pemo de la cuchilla. Ajuste todas las ruedas a la misma altura. Umpie la porte inferior de la caja de la segadora. Acumulacibn de cdsped, hojas o basum debajo de la segadora. 3. 1. Cuchilla desgastada, doblada o sueffa, Ciguenal del motor doblado. 1. Cambie la cuchi_la.Apdete el pemo de la cuchilla. 2. Pbngase en contacto con su centro de servicio Sears o con un otto centro de servicio cualificado. 1. El freno del volante del motor estzt aplicado cuando se suelta la barra de control. 2. CigueSaf de1motor dobiado. 1. 3. Adaptader de la cuchi]la quebrado. La cuchitla se arrastra en el c6sped. 3. 1. Altura de corle demasiado baja. 2. Levantamiento de la cuchilla desgastado. 3. Recogedor sin ventilacion de aire. 1. Eleve la altura de code. 2. Cambie las cuchiflas. 3. Umpie el recogedor de c_sped. 4. =lecogodor de ;_sped no se lena (si vlene Jqulpado) 2. 3. 2. _orddn irrancador |ificlt de t|rar o suelta, Altura de las ruedas dispareja. 1. 2. 3. 4. 2. 4. El c_sped est_ demasiado 1. alto o la altura de la rueda demasiado baja. Parte trasera de la 2. caja]cuchilla de la segadora arrastr_indose en el c_sped. Recogedor de c_sped 3. demasiade Ileno. Posicibn de la altura det mango 4. no adecuada para usted. 33 Presione ta barra de contrc; hacia el mango supedor antes de ltrar et cordbn arrancador. Pbngase en contacto con su centre de servicio Sears o con un otto centro de servicio cualiflcado. Cambie el adaptador de la cuchilla. Mueva la segadora a un lugar en donde el c_sped ha sido cortado o a una supedicie firme para hacer arrancar el motor. Eleve la altura de corle. Eleve la parte trasera de la caja de la segadora (1) un lugar mds alto. Vacie el mcogedor de cdspsd Ajuste la altura del mango de modo que le acomode. CRAFTSMAN ROTARY LAWN MOWER- - MODEL NUMBER 917°388224 7 46 5 5O 77 21 36 5_ 7g 43 44 CRAFTSMAN ROTARY LAWN MOWER - - MODEL NUMBER 917.388224 KEY NO. PART NO 1 2 3 4 5 7 11 12 13 16 19 21 22 23 27 3O 33 34 35 36 39 4O 43 44 45 46 5O 51 636O1 86902 132001 1697()9X479 16970_(479 131559 1685..%?. 8507'3OX004 136376 S1755 165858 66426 160831 1655_ 163O33 751153 168164X479 15O16_(479 16_3&,<007 16836_0C4 87877 19112222 16_2.8 146248 83_3 774OO 1763O4_ DESC_ Locknut 114-20 C_tm_ Bal RcpeGuide UpperHar_le I.o_t_l_ Handle Bo_5/16-18 EngmeZ_e ControlCable Hex Trvead RollingScrew # 10-24 xi/2 UpStop Bracket HandmKnd_ Ha_in Co_ts_ RearDellect_ W_eT_e OLschargeGuard Tc_ion Sp,t_ H_Je Rod Nut Hex _ Lock5/t6-18 Whe_ S_ Support (I.BIt) Wh_ arac_ Support( R_ght) Whe_ BracketAdjust_ S_c=or Stung KEY PART NO. NO 52 55 59 61 _ 63 64 65 67 150406 854_3 161345 851514 141114 851074 72 73 74 76 77 78 79 80 --- 1671_X3O4 1671330(004 751153 161622 T"o0_7 87584X5O4 1608_8 160630 17_5O 161058 551084 -- ÷ DESCRIPTION Hex Head Thread RollingScrew 3/8-16 x I [_OerDec_ Lawn Mower Hous_g ( Ind. Key No. 55) BladeAe_pter _" B_de _Washer Helical Lockw_._er 3_ He_ Head .Screw 318-24 x 1/4 Grd. 8 Eng_le - ( See Breakdown) Craftsm_ Mod_ No. 143.014504 Ax_eA_A_n. (RPJLF) _,Arm _(RF/LR) NIX Cip.Ckoseo_ H=ngeBracket ShouldrBolt,5_16-18x .51 MulchmFfate Owr_s Man_ (Er,_LaVSpar,_h) W_='r_ngDecal (Not Sho,,m) Sek_orKnob Was_er Shouk_erB_t WhedAsseml_ Locknut1/16-18 AvaJ_abie accessodes notindudedwith;awnrnow_, 7133623 G_ Can(2.SGzCon) 71 336(:0 FueIStabilLZer 71330O0 SAE5OWO_(20o,_) Hubcap NOTE: A]I component dimensions given in U.S. inches. 1 inch = 25,4 rnm Screw Hex senated 1/4 x 20 tt CRAFTSMAN 4-CYCLE ENGINE MODEL NUMBER 143.014504 O-370K 298 f3Ol 9OO 370 370C 40O 110_ _1_ 101 12o 119 125 416 207 52 185 238 25O 36 MODEL NUMBER 143.014504 CRAFTSMAN 4-CY(_LE ENGINE KEY NO. PART NO. 1 2 6 7 12 12A 12_B 14 15 16 17 18 19 20 30 40 40 40 41 41 37280 26727 33734 36557 36775 36558 36694 28277 30589 34839A 31335 651018 3_81 32600 36776 35544A 35545A 35546 35541 35542 41 35543 42 42 42 43 45 46 48 50 52 69 70 ?2 75 80 81 82 83 06 89 90 35547A 35548A 3554,9 2_1 36777 32610A 27241 37575 29914 37609 37608 37614 27897 30574A 3059OA 3(;591 30588A 650488 611004 611112 650815 93 650816 100 34443B 101 610118 103 651007 104 37480 110 37047 119 37(_8 120 36825 125 37206 106 3?289 130 6021A 106 37598 150 31672 151 31673 151A 40017 169 36783 DESCRIPTION Cylinder (Incl. 2,20 & 150) Dowel Pin Breathar Element Breather Ass'y. (Ind. 6 & 12A) Breethar Tuha BmatherCover&Tube(Ind. 12B) BreatherTuhaEIbow Washer Governor Rod ([ncl. 14) Governor Lever Governor Lever Clarnp Screw, Torx T-15, 8-32 x 19/64" Extension Spring Oil Seal Crankshaft Piston, Pin & Ring Set (Std.) Piston, Pin & Ring Set (.010" OS) Piston, Pin & Ring Set (.020" OS) Piston & Pin Ass'y. (Std.) (Ind. 43) Pleton & Pin Assembly (.01 O"OS) (Includes Key Number 4-3) Piston & Pin Ass',/. (.020" OS) (includes Key Number 43) RLngSet (Std.) Ring Set (.010" OS) Ring Set (.020 OS) PLstonPin Ret_ning Ring Connec_ng Rod Ass'y. (irK:l.46) Conneetlng Rod Boft Valve Lifter Camshall (NCR)(Inc. Ret 104) OII Pump Ass'y. * Moun6ngFlangeGasket Mounting Flange (Incl. 72-83, 306) Oil Drain Plug Oil Seal Governor Shaft Washer Governor Gear Ass*y. (Incl. 81) GovemorSpod Screw, 1/4-20 x 1-t/4" Flywheal Key Flywheel Balalville Washer Flywhael Net Selid State Ignition SparkPlugCover Screw, T-15, t0.24x15/16" CarnBushlng GroundWire " CylinderHeadGasket Cylinder Head Exhaust Valve (Std.) (Ind. 151) Intake Valve (Std.) (Ind. 151) Screw, 5/18-18x 1-1/2" Reelstor Spark Plug (RJ 19LM4) Valve Spdng Valve Sphng Cap Intake Valve Seal " Valve Cover Gasket NO. PARr NO. 172 174 178 182 184 185 186 189 191 195 207 216 223 224 238 239 241 245 250 260 261 262 275 277 285 287 290 2_ 206 300 301 305 306 307 309 309A 310 311A 313 355 370A 36784 30200 29752 8201 26756 36785 32653 650839 06559A 61(_73 34336 33086 650451 36706 650932 34338 35797 35066 35065 36980 302G0 650831 06790A 650988 3500OA 650926 29774 26460 28763 36916 36246 35647 37610 35406 650562 _50783 35648 37611 34080 590701 06261 370C 370K 370R 380 390 4_0 416 37318 066_ 37317 6402_2 590737 37612 36985 417 900 900 ..... 650621 75_0 IT_SCRgnnoN Valve Cover 10.24 x 9/16" Nut & Lock WaSher, 1/4-28 Screw, 1/4-28 x 7/8" Carburetor To Intake Pipe Gasket Intake Pipe Governor Unk Screw, 114-20 x 3/8" S.E. Brake _cket (Incl. 195) Terrdn_ _rettle Llnk R.P.M. Adjusting Lever Screw, 1/4-20 x 1" Intake Pipe Gasket Screw, 1 _32 x 49/64" Air Cleaner Gasket Air Cleaner Cdlar Air Cleaner Filter Air Cleaner Cover Blower Houalng Screw, 10.24 x 9/16" Screw, 1/4-20 x 1/2" Muftler Screw, 1/4-20 x 2-5/18" Stader Cup Screw, 8-32 x 21/64" FuelLine FuelUneClarnp Screw, 10.32 x 35/64" Fuel T_nk (Incl. 292 & 301 ) FuelCap Oil FillTube "O'-Ring "O'-Ring Screw, 10-32 x 1/2" Screw, 10-24 x 9/4" Dipstick Held Down Bracket Spacer Stader Handle Lubdca6on Decal (Replace_ 64-831) Pdmer Decal (3 X) Starter Decal Hot Sudace CocaJ Carburetor (Inel. 184) Rewind Stader G_sket Set (Ind. Items Marked •) Spark Arrestor Kit (Opitonal) (Includes Key Number 417) Screw, 10-32 x 1/2" (Optional) Replacerneet Engine NON E Replacement Short Block RPM: High 2900 Io 3200 SC_ " " • • t NOTE: Th_s engine could have been built with 590694 etader. NOllE: All component dimensions given in U.S. inches. 1 Inch = 25.4 rnm 37 _RAF!"SMAN MODEL NUMBER 143.014504, 4..CYCLE ENGINE KL_y p,ART 140. NO. 64O283 631615 631767 631184 631183 640070 6505_ 631807 651025 630766 640018 640200 63t8_7 631024 632019 63102B 3O 631(_1 31 831022 64_259 35 36 640080 36A 632766 37 632547 4O 640175 44 27110A 630748 47 48 631O27 6O 632760B 1 2 4 5 6 7 16 17 18 2O 20A 25 27 28 OE_CRtPTtON Carburetor 0ncludes 184 of Engine Pads List) Thr_tle Sh_t & Lever Assembty Throttle Return Spdng * DUstSealWasher - DustSeal(1_rottle) * ll_rotUe Shutter * Shutter Screw Fuel FLitlng Throttle Crock Screw/Idle Speed Screw Tension Spdng Idle Resb'lctor S_ew Idle Restdctor ScrwveCap (Black) Fto_tBo_ ° FloatShalt Roar • Fk_t_:Nd'O'P_ * Inlet Needle, Seat, & Clip (Includes Key #31) SpringClip primer Bu_etak_eT R_ Main NoZzle Tube CarburetorTube • =CPR_ng, M_nhtozz_e'[ube High Speed BowlNut • BowlNutW_ber * We_,h plug, Idle Mixture Well • Welch Plug AtrnosphedcVent Repair Idt (Indubes nen_ Marked 38 MODEL NUMBER 143.014504 CRAFTSMAN 4-CYCLE ENGINE NO, PART NO, -1 2 3 4 5 6 7 8 11 590694 59(_599A 590600 590696 590601 590697 5906_6 590699 590700 590695 12 13 590536 590701 Recoil Starter Spring Pin (Includes Key Number 4) Was_er Reta_er Wa_er Brake Spdng Starter Dcg Dog Spring Pulley & Rewind Spring Assembly Starter Housing Assembly (40degree grommet) Stader Rope (98" x 9/64" diameter) Stader Handle NO. PN_ NO. DIESCRIPIX_I 3" 6 7 8 11 590737 590740 590616 590617 590618A 590687A 12 13 14 59Gro35 590701 590760 DESCRMqION Rewind Stader ReteJner Stader Dog Dog Spi'lng Pulley & Rewind Spdng Assembly Stader Housing Assembly (40 degree grommet) Starter Rope (98" x 9/64" diameter) Stader Handle SpdngClip For repairofmajorbrand appliancesin your own home... 13omatter whomade it, 13omatter who sold 1-800-4-MY-HOME _ (1-e(x)-4e)4_3) Any'_n_ dayorr_hl (u.sJ_andC_ada} W'4_N_ www.Itear&ca For repairofcarry-inproducts like vacuums,lawnequipment,and electronics,callfor the nearestSeam Pads and Repair Center. 1-800-488-1222 A_/ame, dayorrigl_(U.S_.ody) www.seal_com For the replacementparts, accessoriesand owner'smanuals that you need to do-it-yourself,callSears PartsDIrectSM! 1-800-366-PART (1-800-3_-7278) 6 a.m.- 11 p.m., 7 daysa week (u.s_ ordy) w_-#._ears._mct To purchase or inquire about a Sears Service Agreement or Sears MaintenanceAgreement: 1-800-827-6655 (u.s._) 7 a.m, - 5 p.m,,CST, M_ - Sat 1-800-361-6665 (Canada) 9 a.m, - 8 p,rn.EST, M - F, 4 p.m. S_ Parapedrse_icio de_t_,.ad_a AuCanada pour se_v_enl_X;_s: demdio, y paraordenarpiezas: 1.800..LE.FOYERMC 1,'888-SI,,I-HOGAR s_ (1-888-784,.6427) (1-800-533-6937) v,_v.sears.ca L '/ / HomeCentral ®J1 @8ea_ Roebuck andCo. ® Registered 3"rademark / TM ]'rademark / s_ Service Mark of Sears, Roebuck and Co. ® Marca Reglstrada / TM Marca de F_bdca / _ Mama de Servicio de Seam, Roebuck and Co. MCMarque de commerce / MDMarque di_posde de Seam, Roebuck and Co. 178260 03.23.01 BY Printed in U.S.A,
This document in other languages
- español: Craftsman 917.388224