Download Siemens SIMATIC NET Specifications

Transcript
Human-Machine Interface (HMI) Software
Use one of the following HMI software packages:
•
FIX for Windows NT version 6.15 or higher.
•
iFIX version 2.21 or higher.
•
iHistorian 1.0 or higher.
Siemens Software
The SI7 driver supports SIMATIC NET Industrial Communication Software from
Siemens’ July, 2001 + SP4 CD (v6.0). The driver also supports SIMATIC NET
Industrial Communication Software from Siemens’ May, 2000 CD (v5.x). The exact
version you need depends on the interface card installed on your computer, as the
following table shows:
If you are using a...
You need...
CP5613 or CP 5614 interface
card
S7-5613/Windows NT 4.0, 2000 Pro v2.1
CP 5412 interface card
S7-5412/Windows NT 4.0 v5.2 + SP2
CP 5611 interface card
SOFTNET-S7/Windows NT 4.0, 2000 Pro for Profibus
v5.3
CP1613 interface card
S7-1613/Windows NT 4.0, 2000 Pro v2.1.
If you are using the S7-400-H, you’ll also need the S7
REDCONNECT Package for redundancy.
CP1413 interface card
S7-1413/Windows NT 4.0 v5.2 + SP2
Standard Ethernet Adapter
SOFTNET-S7/Windows NT 4.0, 2000 Pro for Industrial
Ethernet v3.3
Chapter 5. About the SI7 I/O Driver
67