Download Canon iR1600 Setup guide

Transcript
5
Press
or
to select <ON> or <OFF>, and press
.
If you want to activate the print limit, select <ON>.
If you do not want to activate the print limit, select <OFF>.
PRINT LIMITS
6
Press
ON
(Stop) to return to the standby mode.
Specifying Whether or Not to Accept Print Jobs of
Unknown ID
NOTE
• The default setting is <ON>.
1
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press
.
For details about the procedure above, refer to steps 1 to 3 in “Setting the Use of Department ID
Management,” on p. 4-5.
2
Press
or
to select <ON>, and press
.
DEPT.ID MANAGEMNT
When you press
3
Press
or
ON
, the <DEPT. ID MANAGEMNT> menu appears.
to select <4.PRINT WITH NO ID>, and press
.
DEPT.ID MANAGEMNT
4.PRINT WITH NO ID
When you press
, the <PRINT WITH NO ID> menu appears.
Setting the Department ID Management
4-11
4
System Management Settings
You can specify whether or not to allow printing documents from a printer driver not correspondent
with a stored Department ID.