Download User Manual - Projector Central

Transcript
4. Controlling the projector
Digital Projection TITAN
HD-600 User Manual
Colour menu
Notes
To return to the main menu, press
up to three times.
From the main menu:
•
Press
and
When using the menus, press
or
to hide or
OSD
reveal the On-Screen-Display.
until Colour is highlighted.
to open the Colour menu. The blue highlight moves to the first item in
Press
the menu.
Colour Menu
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
Notes on Colour and Global Colourimetry
Global Colourimetry menu (see later in this section, in Setup menu)
After a calibration check on the projector or venue, a set of Global colour settings
can be made in the Global Colourimetry menu. These settings are then available
to be copied at any time using the Colour Mode setting in the Colour menu, or
used as a starting point using the Trim feature in the Colour menu.
Read these notes on Colour
and Global Colourimetry
before making any settings in
the Colour menus.
Colour menu (see this section).
The settings made in the Colour menu will be automatically saved in the Mode
History, or can be manually saved to one of the Input Presets (see Input modes
and settings earlier in this section).
The selections available in Colour Mode in the Colour menu are:
Global
Copies the settings made in the Global Colourimetry menu
Temperature
Set the colour temperature using the slider
User
Set the Red, Green and Blue Lift and Gain using the sliders
Peak
Preset high brightness setting
Page 4.28
Rev A. March 2008