Download User Manual - Projector Central
Transcript
4. Controlling the projector Digital Projection TITAN HD-600 User Manual Colour menu Notes To return to the main menu, press up to three times. From the main menu: • Press and When using the menus, press or to hide or OSD reveal the On-Screen-Display. until Colour is highlighted. to open the Colour menu. The blue highlight moves to the first item in Press the menu. Colour Menu Some menu items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal. Notes on Colour and Global Colourimetry Global Colourimetry menu (see later in this section, in Setup menu) After a calibration check on the projector or venue, a set of Global colour settings can be made in the Global Colourimetry menu. These settings are then available to be copied at any time using the Colour Mode setting in the Colour menu, or used as a starting point using the Trim feature in the Colour menu. Read these notes on Colour and Global Colourimetry before making any settings in the Colour menus. Colour menu (see this section). The settings made in the Colour menu will be automatically saved in the Mode History, or can be manually saved to one of the Input Presets (see Input modes and settings earlier in this section). The selections available in Colour Mode in the Colour menu are: Global Copies the settings made in the Global Colourimetry menu Temperature Set the colour temperature using the slider User Set the Red, Green and Blue Lift and Gain using the sliders Peak Preset high brightness setting Page 4.28 Rev A. March 2008