Download User Guide - Linksys LAPN600

Transcript
Linksys
Management Access
You can use the Management page to configure the management methods of
the access point.
CHAPTER 2 Access Point Setup
Data - Management Access Screen
Web Access
HTTP
HTTP (Hyper Text Transfer Protocol) is the standard
for transferring files (text, graphic images and
other multimedia files) on the World Wide Web.
Enable to allow Web access by HTTP protocol.
HTTP Port
Specify the port for HTTP. It can be 80 (default) or
from 1024 to 65535.
HTTP to HTTPS
Redirect
Enable to redirect Web access of HTTP to HTTPS
automatically.
This field is available only when HTTP access is
disabled.
HTTPS
HTTPS (Hypertext Transfer Protocol Secure) can
provide more secure communication with the
SSL/TLS protocol, which support data encryption
to HTTP clients and servers.
Enable to allow Web access by HTTPS protocol.
Figure 12: Management Access Screen
HTTPS Port
Specify the port for HTTPS. It can be 443 (default)
or from 1024 to 65535.
From Wireless
Enable wireless devices to connect to access
point’s admin page. Disabled by default.
Access Control
By default, no IP addresses are prohibited from
accessing the device’s admin page. You can
enable access control and enter specified IP
addresses for access. Four IPv4 and four IPv6
addresses can be specified.
SNMP Settings
SNMP
Simple Network Management Protocol (SNMP) is
a network monitoring and management protocol.
Enable or disable SNMP function here. Disabled by
default.
Contact
Enter contact information for the access point.
The contact includes 1 to 32 characters. Special
characters are allowed.
8