Download User Guide - Linksys LAPN600

Linksys
CHAPTER 1 Quick Start Guide
CHAPTER 1 Quick Start Guide
Physical Details
There is one LED for the device.
LED
Package Contents
LED Color
Activity
Status
Green
Blinking
System is booting.
Solid
System is normal; no wireless device
connected.
Blinking
Software upgrade in process.
Solid
System is normal; at least one wireless
device connected.
Solid
Booting process or update failed; hard
reset or service required.
•
Linksys Wireless Access Point
•
Quick Start Guide
•
Ethernet Cable
•
AC Power Adapter
•
CD with Documentation
•
Mounting Bracket
•
Mounting Kit
•
Ceiling Mount Back Plate
Port and Button
•
Drilling Layout Template
Power Port - Connect the AC power adapter to this port.
Blue
Red
NOTE: Use only the adapter that came with your access point.
Ethernet Port - Connect a wired network device to this port. This port supports
PoE (Power over Ethernet) with a PoE switch or PoE injector. LAPN600 is
powered on from an 802.3at compliant source.
NOTE: When both PoE and AC power adapter are connected to access point,
device will get power from PoE as higher precedence.
Using Cat5e or better cable is highly recommended.
Reset Button - Press and hold this button for less than 15 seconds to power
cycle device. Press and hold for longer than 15 seconds to reset the device to
factory default settings.
1