Download User Guide - Linksys LAPN600

Linksys
Chapter 4 Access Point Management
Ping Test
Packet Capture
Ping Test is used to determine the accessibility of a host on the network.
Packet Capture is used to capture and store 802.3 packets received and
transmitted by the access point based on one specified network interface.
Network interface can be radio, SSID or LAN.
Figure 42: Ping Test Screen
Data - Ping Test Screen
Figure 43: Packet Size Screen
Data - Packet Size Screen
General
IP Type
Enter the IP type of destination address.
IP or URL Address
Enter the IP address or domain name that you want
to ping.
Packet Size
Enter the size of the packet.
Times to Ping
Select the desired number from the drop-list.
••
5
••
10
••
15
••
Unlimited
Network Interface Select the desired network interface from the dropdown list. The interface can be Wireless Radio, SSID or
Ethernet.
Start Capture
Click it to start the capture. You will be asked to specify
a local file to store the packets.
Stop Capture
Click it to stop the capture.
35