Download Operation Manual
Transcript
IPE200 Engineering drive inverter Function Code P1.15 P1.16 Name Appendix B Description Restart after 0: Disabled power off 1: Enabled Delay time for restart 0.0~3600.0s Factory Setting Modify LCD Display 0 ○ RESTART 0.0s ○ DELAY TIME 0 ◎ P2 Group: Motor Parameters P2.00 P2.01 P2.02 P2.03 P2.04 P2.05 Inverter model Motor rated power Motor rated speed Motor rated voltage Motor rated current Motor rated frequency 0: Asynchronous motor 1: Synchronous motor 0.4~1200.0kW 0~500V 0.1~2000.0A 1460rpm 1460rpm P2.08 380V 380V P2.09 Depend on model Depend on model initial position 1460rpm ◎ RATE 380V Depend ◎ MOTOR RATE VOLT ◎ on model MOTOR RATE CURR 50.00Hz ◎ RATE POWER P2.07 P2.12 MOTOR RATE FREQ MOTOR 0.01Hz~P0.07 Depend on model Magnetic pole ◎ on model SPEED Depend on model 50.00Hz MODEL MOTOR 0~36000rpm P2.06 P2.10 Depend INVERTER 50.00Hz 0.00~360.00 .162. Depend on model Depend on model Depend on model Depend on model Depend on model 0.00 ○ ○ ○ ○ ○ STATOR RESISTOR ROTOR RESISTOR LEAK INDUCTOR MUTUAL INDUCTOR NO LOAD CURR