Download AMS Software Manual - Raymond RF Measurements Corp.

AMS Version 4.0 User Manual



Amplifier2 Init
Amplifier2 SetGain real (AMS_Amp2_Gain is updated to real dBm value)
Real = Amplifier2 GetGain
Attenuator1
 Attenuator1 Init
 Attenuator1 SetGain real (AMS_Att1_Gain is updated to real dBm value)
 Real = Attenuator1 GetGain
Attenuator2
 Attenuator2 Init
 Attenuator2 SetGain real (AMS_Att2_Gain is updated to real dBm value)
 Real = Attenuator2 GetGain
Switch1
 Switch1 Init
 Switch1 A (AMS_Switch1 is updated to 1, used for calculating chain
number)
 Switch1 B (AMS_Switch1 is updated to 2, used for calculating chain
number)
 Switch1 C (AMS_Switch1 is updated to 3, used for calculating chain
number)
Switch2
 Switch2 Init
 Switch2 A (AMS_Switch2 is updated to 1, used for calculating chain
number)
 Switch2 B (AMS_Switch2 is updated to 2, used for calculating chain
number)
 Switch2 C (AMS_Switch2 is updated to 3, used for calculating chain
number)
Switch3
 Switch3 Init
 Switch3 A (AMS_Switch3 is updated to 1, used for calculating chain
number)
 Switch3 B (AMS_Switch3 is updated to 2, used for calculating chain
number)
 Switch3 C (AMS_Switch3 is updated to 3, used for calculating chain
number)
3994 Elphin Maberly Rd
PO Box 23072, Ottawa, On K2A 4E2
Tel: 1-613-298-3943
www.raymondrf.ca
Copyright 2008, 2009, 2010, 2011, 2012 Raymond RF Measurements Corp. All rights reserved
Page 39