Download 78K0 Debug - Renesas Electronics

CubeSuite+ Ver.1.00.00
APPENDIX A WINDOW REFERENCE
(3) Digit signal setting area
Digit Signal
This area is used to specify 7-segment LED/14-segment LED digits, grid signal connection
pins (output pins), and their active level. The connection method changes as follows according to what is specified for [Grid type].
- When [Digit] selected
Perform digit signal setting. The maximum number of digit pins that can be connected is 16.
Connection to all the digit pins can be done by using the scroll bar on the right side of the
area.
- When [Customize] selected
Cannot be selected.
Pin Name
The connection pins can be specified either via direct input or through
selection from the drop-down list. As the setting signal, specify the connection pins in a series from the lowermost digit.
Active Level
Remark
The active status can be selected with a option button, as follows:
LOW
Sets the active level to LOW.
HIGH
Sets the active level to HIGH (default).
For the pin names that can be specified, see the user's manual of the microcontroller that is used.
[[Style] tab]
(1) Style information setting area
Full up LED
This area is used to set and change related to the filling of each cell of the object are performed. You can change the color by clicking the pull-down button.
Frame Line of LED
Active Color
Specifies the fill color during active display.
Inactive Color
Specifies the fill color during inactive display.
This area is used to set and change related to the frame of each cell of the object are performed.
Color of Line
Specifies and changes the line color.
You can change the color by clicking the pull-down button.
Dotted/Solid Line
Specifies and changes the line shape (dotted/solid).
The desired line shape can be selected from the drop-down list.
The line shape can be specified only when the line thickness is "1" in
[Thickness of Line].
Thickness of Line
Specifies and changes the line thickness.
The desired line thickness can be specified either via direct input or
through selection from the spin button.A value in the range of 1 to 100
(decimal) can be specified.
R20UT0559EJ0100 Rev.1.00
Apr 01, 2011
Page 371 of 493