Download DC 2000 - Monarch Instrument

Chapter 5 Programming
5.4.4 Bar Assign
The Bar Assign menu option allows the user to assign specific points to the individual bars in the bar graph
display. In the Display menu, use the UP (↑) or DOWN (↓) Arrow Keys to highlight the Bar Assign menu option
and press ENTER. “Bar 1 = PT X” will be displayed. Use the UP (↑) or DOWN (↓) Arrow Keys to select the
point corresponding to Bar 1 and press ENTER or EXIT to return without affecting the bar. Do the same for Bars
2 - C. Note that selecting point 0 effectively turns the bar off but does not remove it from the display. If “Bar X
= PT 0” is selected, the top of Bar X will be blank. Once all bars have been assigned, press EXIT to return to
the Display menu.
5.4.5 Digital Assign
The Digital Assign menu option allows the user to assign specific points to the individual Digital Displays (Total
of 6) in the Digital Window display. The Digital Windows are displayed as two rows of three displays, numbered
1 to 3 across the top, and 4 to 6 across the bottom or four rows of 3 for twelve channels. In the Display menu,
use the UP (↑) or DOWN (↓) Arrow Keys to highlight the Digital Assign menu option and press ENTER.
“Digital 1 = PT X” will be displayed. Use the UP (↑) or DOWN (↓) Arrow Keys to select the point corresponding
to Digital Window 1 and press ENTER or EXIT to return without affecting the display. Do the same for Windows
2 to C. Note that selecting point 0 effectively turns the Digital Display off but does not remove it from the
display. If “Digital X = PT 0” is selected, the digital window X will be blank. Once all Digital Windows have been
assigned, press EXIT to return to the Display menu.
5.4.6 Display Colors (Color Units ONLY)
The Display Colors menu option allows the user to customize the color of specific items on the trend (or graph
view), the bar charts and the digital windows. In the Display menu, use the UP (↑) or DOWN (↓) Arrow Keys to
highlight the Display Colors menu option and press ENTER. Use the UP (↑) or DOWN (↓) Arrow Keys to
select the display option to customize. A window will appear with a color band. Use the UP (↑) or DOWN (↓)
Arrow Keys to select a color and press ENTER or EXIT to return without affecting the display. Do the same for
the other display color options. Once all colors have be modified, press EXIT to return to the Display menu.
5.4.7 Pick Views
The Pick Views menu option allows the user to select the desired screen views when the view button is
pressed. The trend view and the Alarm window are always active. In the Display menu, use the UP (↑) or
DOWN (↓) Arrow Keys to highlight the Pick Views menu option and press ENTER. At each view, press YES
if you want to see the current view when toggling, or press NO if you do not want see the current view when
toggling. Once you go through all the views, you will be returned to the Display menu.
5.4.8 Rotate Scales
The Rotate Scales menu option allows the user to select whether or not the different scales rotate on the graph
automatically or manually. In the manual mode, the displayed scale will not change until the center of the
scale is pressed. This will rotate through all programmed scales. In the automatic mode, all programmed
scales will rotate at a set interval automatically. NOTE: At any time, the center of the scale can be pressed to
rotate to the next programmed scale. In the Display menu, use the UP (↑) or DOWN (↓) Arrow Keys to
highlight the Rotate Scales menu option and press ENTER. Use the UP (↑) or DOWN (↓) Arrow Keys to
select either manual or automatic and press ENTER. Press EXIT to return to the Display menu.
5.4.9 Screen Dimmer
The Screen Dimmer menu option dims or turns off the backlight after a user specified time. The time out of the
four levels (3,2,1 or off) is programmable from 0 to 720 minutes in one minute intervals. In the Display menu,
use the UP (↑) or DOWN (↓) Arrow Keys to highlight the “Screen Dimmer” menu option and press ENTER. A
window will pop up prompting for the “Bright Level”. Use the UP (↑) or DOWN (↓) Arrow Keys to select one of
the three Brightness Levels (3, 2, or 1) and press ENTER. A window will now pop up prompting for the “Dim
Page 5-5