Download User Manual

3. Adapter Management Utility Command Line Interface
Process UCNAs Only (/ucna)
Process UCNAs Only (/ucna)
Usage: /ucna
The Process UCNA Only switch causes elxflash to only act on UNCAs.
Example usage:
./elxflash /q /ucna - For a query only UCNAs are displayed.
./elxflash /auto /up /ucna - Apply auto update only to UCNAs.
When doing a firmware or boot code update and the /ucna switch is used, only
UCNAs are updated; FC HBAs are not displayed.
Query (/q)
Usage: /q
The query switch displays an adapter's model, WWN or MAC address, PCI_ID,
firmware version, and boot code version. Query can be used with any switch.
LightPulse Adapter Status Summary
HBA=<model>, Port Type=<port_type>, WWN =<wwn>, Firmware=<version>,
Boot Code=<version>, Boot Code enable=<status>
FCoE Adapter Status Summary
HBA=<model>, Port Type=<port_type>, WWN =<wwn>, Firmware=<version>, Boot Code=<version>
iSCSI and NIC-only Adapter Status Summary
HBA=<model>, Port Type=<port_type>, MAC =<mac_address>, Firmware=<version>, Boot
Code=<version>
Notes:


On LightPulse adapters, the query switch displays boot code version
information only if the adapter has boot code installed.
When the query switch is used with an operational switch, the query also
includes an additional field called “Supported Firmware” or “Supported Boot
Code”.
Ramdrive (/ramdrive) - (Windows Offline Adapter
Management Utility only)
Usage: /ramdrive=<drive letter>[:]
The ramdrive switch specifies the drive for creating temporary and log files. The
default is drive X.
Offline and Online Adapter Management Utilities Version 6.3 User Manual
P009408-01A Rev. A
31