Download Manual for 3530044

This function changes the odometer value contained into the EDC16 ECU. Just put the new
odometer value and press “Set” button, and then save the dump.
- ECU EDC16 Security access code / Checksum calculator [95320]
Required license: None
This function displays the security access code which is contained into the EDC16 unit. It also
calculates and fixes (if some of them are incorrect) the checksums of the EEPROM. Please pay
attention that the checksums are calculated for the area till address 0x180 because after that area
the EEPROM sections are different for each different software version of the EDC16 unit.
Fortunately the most of the interesting data are found in this section.