Download Configuration Manual - XT3 14.00

EVS Broadcast Equipment SA
Issue 14.00.A - June 2015
SLSM 6-Phase Configurations
The table below shows the available SLSM 6 Phase configurations in HD with an XT3 4U
server.
A separate channel is used for each phase. The table shows how the BNC connectors
should be assigned on the rear panel, which corresponds to the channel assignment at the
level of the codec module of the V3X board.
#REC
SLSM
6x
#REC
#PLAY
IN4/OUT1
IN3/OUT2
IN2/OUT3
IN1/OUT4
Prim.
Ch.
Sec.
Ch.
Prim.
Ch.
Sec.
Ch.
Prim.
Ch.
Sec.
Ch.
Prim.
Ch.
Sec.
Ch.
PLAY1
MIX1
REC
1,3
REC
1,6
REC
1,2
REC
1,5
REC
1,1
REC
1,4
7-Channel Mode
1
0
1
Example in 7-Channel Mode (1xSLSM 6PH + 1 PLAY MIX)
The BNC connectors to be used as record and play channels in an SLSM configuration
with 1xSLSM 6PH + 1 PLAY MIX need to be cabled as shown below:
68
3. Supported Configurations