1
Download CGS User Manual
Transcript
Dok.Nr./Doc. No.: CGS–RIBRE–SUM–0001 Ausgabe/Issue: Überarbtg./Rev.: Seite/Page: 13 – D–126 Datum/Date: Datum/Date: von /of: 28.02.2013 – D–153 No kernel for the specified model is running on host %. Check your command for correctness. If necessary start the simulator on the desired host and try again. No kernel host specified. The user pressed the kernel start button, but did not specify the host on which the kernel should be started. Try again. No kernel is configured for % It is not possible to start the desired model. Check whether the model is configured for the corresponding machine type. Re–configure the model if necessary. No open connection message from % received. Received OP–code % instead. Internal error message. Please write a Software Problem Report (SPR) immediately. No path for RID % found. Internal error message. Please write a Software Problem Report (SPR) immediately. No path for SID % found. Internal error message. Please write a Software Problem Report (SPR) immediately. No privilege to log. The user has no log privilege. Use the HLCL command GRANT to grant he specified privilege or choose the screen as destination for snapshots/traces. No RID found for SID %. Internal error message. Please write a Software Problem Report (SPR) immediately. No RID for path % found. Internal error message. Please write a Software Problem Report (SPR) immediately. No rule is specified for state %. Copyright per DIN 34
