Download CGS User Manual
Transcript
Dok.Nr./Doc. No.: CGS–RIBRE–SUM–0001 Ausgabe/Issue: Überarbtg./Rev.: Seite/Page: I-15 13 – I–101 Datum/Date: Datum/Date: von /of: 28.02.2013 – I–124 UCL Ground System library Specification: SYSTEM The library SYSTEM contains some Operation System specific operations. library Id (Body_Id): 17 I-15.1 UCL System library Specification ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –– –– *************************** –– System UCL System Library –– *************************** –– –– ABSTRACT –– Defines operations for OS command execution. –– –– Must be compiled for ground and with Body Id = 17 –– –– recommended Nickname: ”SYSTEM” –– –– IDENTIFICATION –– PROJECT NAME : CGS –– OBJECT NAME : System System–Library –– CGS CM : ”$Id: //cgs/MAIN/src/distribution/gsaf/cgsi/lib/ucl/system_.ucl#5 $” ––*––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –– CONTENTS –– COMPILER : UCLC –– LANGUAGE : UCL ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– library SYSTEM; ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –– IMPORTS ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– import GROUND_COMMON; ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– –– OPERATIONS ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––– –– Command execution –– ––––––––––––––––––––––– 1: guarded procedure EXECUTE (in COMMAND : STRING; in PARAMETER : STRING := ””; in NODE : NODE_NAME := \\; out PID : UNSIGNED_INTEGER; out STATUS : UCL_RETURN); –– Description: –– This operation creates a new process and executes COMMAND –– using ’/bin/sh’ together with the specified parameter on the specified –– node. The created process will run completely independent. –– It is up to the user to redirect input and output if necessary. –– The started process is running with the user_id und group_id –– of the user of the running PCS process (i.e. cgsadmin). –– Parameters: –– IN: –– COMMAND : command to be exceute –– PARAMETER : parameter list –– NODE : Node on which the command is to be executed, by default –– the current node. –– OUT: –– PID : OS process identifier of the created process. –– STATUS : UCL return status –– OK –– NOT_OK 2: guarded procedure EXECUTE_AND_WAIT (in COMMAND : STRING; in PARAMETER : STRING := ””; in NODE : NODE_NAME := \\; in TIMEOUT : DURATION; out PID : UNSIGNED_INTEGER; out UNIX_RETURN : INTEGER; out STATUS : UCL_RETURN); –– Description: Copyright per DIN 34
Related documents
Lab #5 Camera and Touch Screen Interfacing Objective: Configure
CGS User Manual
CGS V4.4.0 User Manual (Issue 2/L)
CGS 4.5.0 Release Notes
Dynalec Integrated Announcing System User`s Manual Dynalec
CGS User Manual
CGS 4.5.1 Release Notes
Sensor Tuner
Hurwitz Interconnect Delay Evaluation
USB TC-08 User`s Guide
RollView User Manual
CGS 5.0.1 Release Notes