Download - Fuji Xerox

Setting your machine
DUPLEX
PRINTING
(DEPENDING
ON MODEL)
This function is only available if you have previously installed the duplex module and the additional
paper tray at the back of your terminal.
After installing the Duplex module at the back of your multi-function terminal, you can print faxes
received in two ways:
• SINGLE SIDED
• DOUBLE SIDED
All faxes received are printed according to the mode selected from the menu, no matter how the duplex
key is set.
To select the fax print mode :
244 OK - SETUP / RECEPTION / DUPLEX
Select the required option SINGLE SIDED or DOUBLE SIDED and validate your choice with
the OK key.
TECHNICAL
PARAMETERS
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
29 OK - SETUP / TECHNICALS
Select the desired parameter and confirm with OK.
With the keys
press OK.
Parameter
or
, modify the parameter settings by following the table below and
Setting
Signification
1 - SCANNING
MODE
1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO
Default value of the scan mode resolution for the documents
to be transmitted.
2 - TX HEADER
1 - WITH
2 - WITHOUT
If this parameter is on, your header will appear on all
documents sent to your subscribers with your name, number,
date and number of pages.
Note: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.
4-8
Date en cours : 29 March 2005
C:\Documents and Settings\G092899\Bureau\MFF LU 252032677A WorkCentre222-228_Australie\04_Configuration GB.fm