Download LabWindows/CVI PID Control Toolkit Reference Manual
Transcript
Glossary closed loop A signal path which includes a forward path, a feedback path, and a summing point, and which forms a closed circuit. Also called a feedback loop. controller output See manipulated variable. D damping The progressive reduction or suppression of oscillation in a device or system. DC Direct current. dead time (Td) The interval of time (expressed in minutes) between initiation of an input change or stimulus and the start of the resulting observable response. derivative (control) action Control response to the time rate of change of a variable. Also called rate action. deviation Any departure from a desired value or expected value or pattern. downstream loop In a cascade, the controller whose setpoint is provided by another controller. E EGU Engineering units. F FC Flow controller. feedback control Control in which a measured variable is compared to its desired value to produce an actuating error signal that is acted upon in such a way as to reduce the magnitude of the error. feedback loop See closed loop. G gain For a linear system or element, the ratio of the magnitude (amplitude) of a steady-state sinusoidal output relative to the causal input; the length of a phasor from the origin to a point of the transfer locus in a complex plane. Also called the magnitude ratio. LabWindows/CVI PID Control Toolkit Glossary-2 © National Instruments Corporation