Download LabWindows/CVI PID Control Toolkit Reference Manual

Transcript
Glossary
closed loop
A signal path which includes a forward path, a feedback path, and a
summing point, and which forms a closed circuit. Also called a feedback
loop.
controller output
See manipulated variable.
D
damping
The progressive reduction or suppression of oscillation in a device or
system.
DC
Direct current.
dead time (Td)
The interval of time (expressed in minutes) between initiation of an input
change or stimulus and the start of the resulting observable response.
derivative (control)
action
Control response to the time rate of change of a variable. Also called
rate action.
deviation
Any departure from a desired value or expected value or pattern.
downstream loop
In a cascade, the controller whose setpoint is provided by another
controller.
E
EGU
Engineering units.
F
FC
Flow controller.
feedback control
Control in which a measured variable is compared to its desired value to
produce an actuating error signal that is acted upon in such a way as to
reduce the magnitude of the error.
feedback loop
See closed loop.
G
gain
For a linear system or element, the ratio of the magnitude (amplitude) of
a steady-state sinusoidal output relative to the causal input; the length of
a phasor from the origin to a point of the transfer locus in a complex
plane. Also called the magnitude ratio.
LabWindows/CVI PID Control Toolkit
Glossary-2
© National Instruments Corporation