Download DirectSOFT5 - AutomationDirect

DirectSOFT5 – Hopper Empty & Exit Tube Full Delay Timers – 4 of 15
15:36
Timer ‘T0’ allows the Part Feeder slotted
disk to continue to run for 10 seconds after
no more parts are detected in the hopper.
The Hopper is Empty detector is a
Capacitive Sensor.
The timer resets
anytime parts are detected.
A Fiber Optic Photo Sensor is used to
detect if the Parts back up in the Exit Tube.
Timer T1 is used so that every part that
triggers the Fiber Optic photo sensor
doesn’t stop the Part Feeder slotted disk,
and the part has to block the photo sensor
for one second before the action is paused.
Rung 4/5