Download DirectSOFT5 - AutomationDirect

Application – Control Panel Enclosure
The Part Feeder Station controls are housed in a non-metallic JIC
NEMA 4X enclosure with a window through the door. A
C-more Micro-Graphic panel and the master control power
circuitry push buttons are mounted through the enclosure’s
window.
Located on the enclosure’s panel are the DirectLOGIC DL05 PLC,
AcuAMP DC current sensor, 24 VDC power supply used for the
PLC’s DC inputs and also 24 VDC power to the AcuAMP, and the
master control power circuitry relay.
The SureStep stepper motor drive and stepper motor power supply
are also mounted to the enclosure’s panel.
AutomationDirect’s terminal blocks, wire duct, DIN rail, and
machine tool wire are used to construct and wire the control panel
enclosure.
AutomationDirect multi-wire connector and multi-conductor
flexible control cable is used to connect the control panel enclosure
to the Part Feeder Station.
04:42
Control Enclosure