Download Radar Interface Module - RIM782

Radar Interface Module - RIM782
Edition Date: 26-Mar-10
5. DATA RECORDING USING THE RIM782
5.1. Introduction
The UDR board of the RIM782 works very similar to the UDR600 (USB Data Recorder), more technical
information regarding the UDR part of the RIM782 can therefore be found in the UDR600 manual.
The RIM782 supports 2 types of recording:
1. Bit Recording: format independent bitwise recording
2. Serial Protocol Recording
Both recording types can be selected through the Serial Data button of the RASS-S toolbox. The user will
notice that the same recording software will open up, however a different software is loaded into the UDR
board of the RIM782. The conversion of the recorded files depends on this selection as well (bit recording or
serial protocol recording).
5.2. Recording Software
5.2.1.
Getting Started
The Bit Recorder and the Serial Protocol Recorder tool can be opened from the Serial Data
on the RASS-S toolbox. Both selections will open the same UDR Control vi.
button
Figure 32: UDR Control software
IE-UM-00168-003 RIM782 User Manual.odt
39/53