Download LoadMaxx Tractor User Guide - Air

Using LoadMaxx | Changing Display Features
Setting the Display Backlight
By default, the display backlight remains on for 5 minutes after you
press any key. If you would like the backlight to remain on for more
or less time, or if you would like to change the brightness of the
backlight, follow the instructions below.
1. From the weight display, press ESC to reach the main menu.
2. Press ▼ until PRINT, SETUP is flashing. Press ENTER.
3. Press ▼ until SYSTEM SETUP is flashing. Press ENTER.
4. Press ▼ until SYS CONFIG is flashing. Press ENTER.
5. DISPLY SETUP is flashing. Press ENTER.
6. Press ▼ until MORE OPTIONS is flashing. Press ENTER.
7. BACKLIGHT is flashing. Press ENTER.
8. Use ▲ or ▼ to select BRIGHTNESS or MINUTES. Press
ENTER.
9. If you selected BRIGHTNESS, use ▲ or ▼ to select either
BRIGHT or DIM. Press ENTER. The screen will read
ACCEPTED.
10.If you selected MINUTES, use ▲ or ▼ to select the number
of minutes you would like the backlight to remain on after
you press any key. Press ENTER. The screen will read
ACCEPTED.
33