1
Download 5 DDEC FEATURES - Wanderlodge Gurus
Transcript
DDEC IV APPLICATION AND INSTALLATION MANUAL The pin definition for the connector, current, and wire gage are listed in Table 5-17. Current Terminals Wire Gauge Under 5 Amps 1-2, 7-12 16 AWG 5 - 10 Amps 1-2, 7-12 14 AWG -- 3-6 18 - 20 AWG Table 5-17 Wire Gauge for ESSE-2 The electrical input voltage options for ESSE-2 are listed in Table 5-18. Input Voltage Option Max. Operating Current Max. Standby Current 8 - 40 VDC 40 - 80 VDC At 40 V: 250 MA At 80 V: 115 MA At 24 V: 220 MA At 64 V: 100 MA At 12 V: 200 MA At 40 V: 50 MA At 40 V: 70 MA At 80 V: 75 MA At 40 V: 45 MA At 64 V: 60 MA At 40 V: 30 MA At 40 V: 50 MA 0.1 to 10 Amps - 28 VDC Resistive Load 0.1 to 4 Amps - 75 VDC Resistive Load 0.1 to 8 Amps - 28 VDC Inductive Load 0.1 to 3 Amps - 75 VDC Inductive Load Power Supply Transient Protection 900 VDC for 100 microseconds Exponential Decay 140 VDC for 1 milliseconds Exponential Decay 110 VDC for 0.45 seconds Exponential Decay 900 VDC for 100 microseconds Exponential Decay 140 VDC for 1 milliseconds Exponential Decay 110 VDC for 0.45 seconds Exponential Decay Reverse Polarity Protection 1000 VDC 1000 VDC Relay Contact Ratings Table 5-18 ESSE-2 Electrical Input Voltage Options All information subject to change without notice. (Rev. (Rev. 3/02)) 7SA742 0203 Copyright © 2002 DETROIT DIESEL CORPORATION 5-37
