Download RUBY-7720VG2A User`s Manual

BIOS Setup Information
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The choice: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10
Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min.
Soft-Off by PWR-BTTN
This item allows users to set the time to remove the power after the power button is
pressed.
The choice: Instant-Off, Delay 4 Sec.
CPU THRM-Throttling
Set the rate of the CPU Thermal-Throttling.
The choice: 75.0%, 50.0%, 25.0%
Wake-up by Onboard Lan
The choice: Enable, Disabled.
Power On by Ring
Select “Enabled”, a system that is at soft-off mode will be alert to Wake-On-Modem.
The choice: Enabled, Disabled.
※USB KB Wake-Up From S3
The choice: Enabled, Disabled. (Default Disabled)
Resume by Alarm
This item allows users to enable/disable the resume by alarm function. When
“Enabled” is selected, system using ATX power supply could be powered on if a
customized time and day is approached.
The choice: Enabled, Disabled.
※Date(of Month) Alarm
When “Resume by Alarm” is enabled, this item could allow users to configure the
date parameter of the timing dateline on which to power on the system.
The choice: 0 ~ 31.
RUBY-7720VG2A User’s Manual
4-23