Download INSTALLATION AND USER GUIDE

NBase Communications

XM59x for GigaHUB
set-mon-port
Usage:
set-mon-port <port>
This command sets the port to be monitored. port is a decimal port number. All traffic from this port will be
duplicated on the monitoring port specified by the monitor command.
monitor
Usage:
monitor <port>
This command sets the monitoring port. All traffic from the port specified by set-mon-port will be duplicated
on port. port is a decimal port number.
stop-mon
This command ends port monitoring.
get-nv-mon
This command retrieves the port monitoring information stored by the save-mon command in the NVRAM.
save-mon
This command saves the current port monitoring information (including set-mon-port and monitor commands)
into the NVRAM, so that the monitoring will be restarted upon device reset.
clear-nv-mon
This command clears the port monitoring information previously stored in the NVRAM with the
save-mon command.
48