Download "user manual"

Transcript
9.
Type reboot and hit RETURN.
The virtual appliance will reboot and you will be able
to log in to the GUI using the new admin password.
Note: If your virtual appliance is a member of a cluster, you should then visit the Diagnose
section of the Admin Server, which will report a configuration conflict.
Use the Diagnose
page to push the new admin password to the other virtual appliances in the cluster.
4.5 Expanding the log file partition
If you find that you need more space for your log files, you can expand the virtual disk, and
then resize the file system from the virtual appliance’s command line.
Note: Before you start, please ensure that you have:
1.
Performed a backup of your ZXTM configuration and log files.
2.
Stopped the virtual appliance.
4.5.1 VMware Server
1.
On the command line of the VMware Server, change to the directory containing the
virtual disk file (.vmdk) for your Virtual Appliance.
2.
Use the vmware-vdiskmanager command to expand the disk.
vmware-vdiskmanager -x 6Gb < Virtual Appliance Name >.vmdk
4.5.2 ESX Server
1.
On the command line of the ESX Server, change to the directory containing the
virtual disk file (.vmdk) for your Virtual Appliance.
2.
Use the vmkfstools command to expand the disk:
vmkfstools -X 6g <Virtual Appliance Name>.vmdk
4.5.3 The Virtual Appliance log partition
1.
Start the Virtual Appliance.
2.
Engage the virtual appliance’s console interface, or connect using SSH.
3.
Use the zxtm-expand-logs-partition command to resize the /logs partition:
zxtm-expand-logs-partition
© Zeus Technology Limited 1995-2008
25