Download Telstra Slim Touch 9650

Additional handsets (multi handset packs only)
If you have purchased a multi handset pack you
are able to make internal calls, transfer external
calls from one handset to another and use the
conference option.
4. Press on the calling handset or place your
handset back in the telephone base or charger
to transfer the external call to the called
handset.
Call another handset
3-Way conference call
You can make internal calls between two
handsets.
and if you have only one other
1. Press
handset, it will ring.
2. If you have extra handsets, enter the handset
number to select the other handset you want
to call.
Transfer a call
You can transfer an external call to another
handset registered to the base.
. Your external
1. During external call, press
caller is put on hold.
2. If you have only one other handset, it will ring.
If you have extra handsets, enter the handset
number to select the other handset you want
to transfer to.
3. Press on the called handset to answer the
call.
40
You can hold a 3-way conference call between
2 internal callers and 1 external caller.
No subscription is required.
.
1. During the external call, press
Your external caller is put on hold.
2. If you have only one other handset, it will ring.
If you have extra handsets, enter the handset
number to select the other handset you want.
3. Press on the called handset to answer the
call.
on the calling handset to
4. Press and hold
setup the conference call.
Additional handsets
De-register a handset
Register an additional handset
1. In standby mode, press
to enter the
feature menu.
2. Press
to select DE-REGISTER HS.
3. Enter the system PIN. (Default is 0000.)
to confirm.
Press
to select the desired
4. Press
handset.
5. Press
, and display will show DE-REGISTER?
6. Press
to confirm. Display will show
DE-REGISTERED if it is successful.
Your additional handset(s) will come preregistered but should you need to register a
handset, follow these steps.
NOTE:
You cannot de-register a handset if any other system
handset is in use.
when in idle mode to enter the
1. Press
feature menu.
2. Press
to select REGISTER HS.
3. Enter the system PIN. (Default is 0000.)
4. Press
, and display will show
PRESS AND HOLD PAGE BUTTON!
5. Press and hold on the base.
Handset display will show REGISTERING….
The handset will display HANDSET X, with
X denotes the handset number (1-12), if
registration is successful.
The In Use light comes on when registering.
NOTE:
If the registration is not successful, the display will
show NO BASE FOUND. To reset the handset, remove
the handset from the telephone base and place it back
in. Try the registration process again.
41