Download Firmware Operation Manual
Transcript
Step 2. Disk drive information will be displayed on the LCD. Press the up or down arrow ke ys to select a disk drive that ha s not been assigned to any logical drive, then press ENT. Add Global Spare Step 3. Press the up or down arrow keys to select “Add Global Drive Spare Drive,” then press ENT. .. Step 4. Press ENT again for two Add Global Spare seconds to add the spare Drive Successful drive. The message, “Add Global Spare Drive Successful, ” will be displayed on th e screen. WARNING! Assigning a hot‐spare to an array composed of drives of a different interface type should be avoided. For example, a SATA Global spare may accidentally participate in the rebuild of an array using SAS members. It is better to prevent mixing SAS an d SATA drives in a logical drive configuration. 5.7.3 Adding an Enclosure Spare Drive In environments where RAID volumes might span across several enclosures, e.g., using JBODs, this option can designate a spare drive to rebuild a failed drive within the same enclosure. Step 1. To create an Enclosure Spare Drive, press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select ʺView and Edit Drives,ʺ then press ENT. Step 2. Disk drive information will be display ed on the LCD. Press the up or down arrow keys to Creating Arrays & Host LUN Mapping - LCD 5-19