Download USER MANUAL

SATEL
INTEGRA
27
Cash machine zones bypassing [Acces.to cash m.] – the code to be used to unblock
access to the cash dispenser (the 24H CASH MACHINE type zones will be temporarily
bypassed in the partition).
Guard – using this code means having made the round (additionally, it can result in the
partition being temporarily bypassed for the duration of guard round). The installer defines
the modules which are used to confirm making the round and determines the time interval
between successive rounds. If such a user is granted access to the partition, he/she will
have the same possibilities as the NORMAL type user.
Scheduled – the user has access to the system as per the time schedule for a specified
period of time. It is necessary to select the schedule (the schedule is programmed by the
installer) and define the user validity period.
5.8.2
Adding new user
1. Enter the code and confirm with the
key.
2. Press in turn the 2 and 1 keys. The list of functions to define the user parameters will be
displayed.
If the service code has been entered, before the list of functions is displayed, it is
necessary to specify the object in which the new user is to be created (the service
code enables access to all objects).
3. Using the appropriate functions, define the user's parameters.
At least one identifier, i.e. code, proximity card, DALLAS iButton or keyfob, must be
assigned to the user.
The new user may not be granted a higher authority level than the person who is
adding that user to the system.
4. Press the
key.
5. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
6. A message will inform you that a new user has been created. Press the
key to return to
the USER submenu.
5.8.3
Edit user
The user can edit the users in relation to which he/she is the superior. For example, if
the user A has created the user B, and the user B has created the user C, then the
user A can edit the users B and C.
The user being edited may not be granted a higher authority level than the person who
is editing such a user.
1.
2.
3.
4.
5.
6.
7.
8.
Enter the code and confirm with the
key
Press the 2 key twice. The list of users will be displayed.
Using the  and  keys, find in the list the user who is to be edited.
Press the key. The list of functions for defining the user's parameters will be displayed.
Using appropriate functions, modify the user's parameters.
Press the
key.
When a prompt appears, asking you if the changes are to be saved, press the 1 key.
A message will inform you that the user has been modified. Press the
key to return to
the list of users.