Download A8NEIP_2P

CIP Objects 88
Interface Flags
Bit
0
Name
Link status
Description
Indicates whether or not the Ethernet 802.3 communications interface is connected to an active network.
Value:Meaning:
0 Inactive link
1 Active link
1
Half/full duplex
Indicates the duplex mode currently in use.
Value:Meaning:
0 Half duplex
1 Full duplex
2 - 4 Negotiation Status
Indicates the status of link auto-negotiation
Value:Meaning:
0 Auto-negotiation in progress.
1 Auto-negotiation and speed detection failed (using default values)
2 Auto negotiation failed but detected speed (using default duplex value)
3 Successfully negotiated speed and duplex.
4 Auto-negotiation not attempted. Forced speed and duplex.
5
Manual Setting requires Reset Value:Meaning:
0 Interface can activate changes to link parameters during runtime
1 Reset is required in order for changes to have effect
6
Local Hardware Fault
Value:Meaning:
0 No local hardware fault detected
1 Local hardware fault detected
7-31 (reserved)
(ignore)
Interface Type
Instance
1
2
3
Value
2
2
1
Description
Twisted-pair
Twisted-pair
Internal interface
Interface Label
Instance
1
2
3
Value
Port 1
Port 2
Internal
A8NEIP_2P EtherNet/IP Option Board
Doc.Rev. 1.00
Doc.Id. HMSI-216-123