Download Research and Development BAAN V User Interface

6 - Programming form fields
6.3
Total fields in a grid
6.3.1
Overview
In BAAN V, it is possible to add a total line to the grid.
6.3.2
Implementation
You only have to modify the UI script in order to add a total line to your grid:
1
Add the following code fragments in your UI script
before.program:
fattr.total.line = true
2
For every update of the total fields add:
…
display.total.fields(“field1”, value1, “field2”, value2)
…
Where field1 and field2 are defined as multi-occurrence form fields on the form and
declared in the UI script. Of course, this can also be a table field.
Restrictions
n
n
n
Total have the same display properties as the field above.
Array fields fields cannot be disabled or enabled (they are always read-only).
The total fields cannot be displayed in the total line.
Example :
before.program:
fattr.total.line = true
before.display.object:
total1 = total1 + whwmd000.amnt1
total2 = total2 + whwmd000.amnt2
if actual.occ = filled.occ then
display.total.fields(“whwmd000.amnt1”,total1,
“whwmd000.amnt2”,total2)
endif
BAAN V User Interface
6-3