1
Download nanoFlash
Transcript
User Connector Pin-Outs (looking into the connector on the nanoFlash, top-side up) Power: 4-pin Hirose; Mating Plug = Hirose HR10A-7P-4S(73) 1. 2. 3. 4. Power: +6.5~+20V, ~6.5W Power: +6.5~+20V, ~6.5W Ground Ground Remote Tally/LTC: 10-pin Hirose; Mating Plug = Hirose HR10A-10P-10SC (73) 1. LTC In 2. 485D+ / 232RX (see “Serial RS232 Control” Addendum for more information (ver1.6.226) 3. 485D- / 232TX 4. Record Start/ Stop 5. Tally Light 6. +5.0V 7. Ground 8. Ground 9, 10 not used nanoFlash 28
