Download INSTALLATION MANUAL

Programming I/O and Sounders T1
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
Service
FRE off
Mute
Buzzer
Exit
Reset
Commission
Configure
Test
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.Then
press T1
Service
FRE off
Mute
Buzzer
Exit
Programming I/O
and Sounders
Service
FRE off
Reset
Mute
Buzzer
Exit
T1
Add/Delete
Change Date/Time
T2
Configure Heat Detectors
Change Text
Network
Panel Outputs
Configure Zones
Language
Auxiliary Board
Alarm Verification Features
Day/Night
Change Pascode
Reset
T1
Off
10 secs
20 secs
30 secs
40 secs
50 secs
60 secs
70 secs
80 secs
90 secs 100 secs 110 secs 120 secs
130 secs 140 secs 150 secs 160 secs 170 secs 180 secs
Exit
69