Download User Manual - Rental Tracker

RF Login
After selecting the RF Mode on the first screen of the program,
is the login to the program. User should use the same user-id
and password that they use on the RTPro desktop application.
If you get an error that says “Cannot connect to the server”, it is
because the scanner is unable to connect to the RF Server
program.
Main Menu
This is the main menu of the program that you will get to
after selecting the Batch Mode or after logging in to the RF
mode. User can select any of the options by taping on the
corresponding button.
If an option is not applicable, then that button is grayed out.
For example, in the RF mode, the Send Batch Data button is
grayed out.
Checkout Barcoded
In this page, you can checkout a Barcoded item to a specific order.
Just scan items with pressing the trigger button or the yellow scan
button on the keyboard. After scanning a Barcoded item to check
out, program displays a success message followed by the
equipment description. It also displays the following quantities for
the equipment you just checked out.
ORD - Shows the number of items ordered for this equipment.
OUT - Shows the number of items checked out for this equipment.
REM - Shows number of remaining items to be checked out.
Barcode# - This box will show the scanned barcodes. In
addition, you can type the barcode manually in this field and press
the OK button or easily scan with scanner trigger button.
331
Barcode Scanners | © 2012 Rental Tracker, Inc.