Download Partner Plus R4 Installation Programming and Use

■
All Telephone Numbers in One Exchange. The following entries prevent
calls to the 976 exchange:
–
Toll Call Prefix required
Prevents local calls
976
1!!!976
Prevents direct-dial calls to all area codes
0!!!976
Prevents operator-assisted calls to all area codes
Prevents direct-dial toll calls in the same area code
1976
(needed only when 0 or 1 is required for toll calls in
the same area code)
Prevents operator-assisted toll calls in the same area
0976
code (needed only when 0 or 1 is required for toll
calls in the same area code)
–
Toll Call Prefix not required
Prevents local calls
976
!0!976
Prevents calls to area codes with “0” as the second
digit, such as 203
!1!976
Prevents calls to area codes with “ 1” as the second
digit, such as 212
■
International Long Distance. To prevent international calls, enter the
international prefix number, 011.
■
Long Distance. To prevent long-distance calls after using one of the local
telephone company features that consist of a * and two digits, such as Call
Blocking (*67), enter *!!0 and *!!1.
Programming
To create a list of Disallowed Phone Numbers:
1.
Press [
2.
At the List NO: prompt, enter a list number (1–4). For example, to select the
first list, press [ 1 ].
3.
At the Entry: prompt, select a list entry (01–10).
4.
At the Data------------ prompt, enter the first telephone number.
5.
To save the telephone number in memory, you must press [
6.
At this point:
7.
Feature
] [ 0 ] [ 0 ] [ System
Program
] [ System
Program
] [ # ] [ 4 ] [ 0 ] [ 4 ].
■
To enter other phone numbers in this list, press [
Steps 4 and 5.
■
To change the phone number you just entered, press [
repeat Steps 4 and 5.
■
To delete the phone number you just entered, press [
■
To create another list, press [
Next Procedure
] [ Prev
Select another procedure using [
programming mode.
Next Procedure
] or [ Prev
5-38 Disallowed Phone Number Lists (#404)
Next Item
Enter
] and repeat
Remove
Remove
Procedure
].
] and
].
] and go to Step 2.
Procedure
] or exit