Download Partner Plus R4 Installation Programming and Use

FCC Information
C
Federal Communications Commission
(FCC) Interference Information
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of FCC rules, These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manuals, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will have to correct the
interference at his or her own expense.
NOTE:
References to FCC regulations in this appendix are not applicable outside of the
U.S.
FCC Notification and Repair Information
This equipment is registered with the FCC in accordance with Part 68 of its
rules. In compliance with those rules, you are advised of the following:
■
Means of Connection: Connection to the telephone network shall be
through a standard network interface jack USOC RJ11C. These USOCs
must be ordered from your local telephone company.
FCC compliant line cords are provided with Line and Line/Extension
Modules for connecting to the telephone company provided USOC
RJ11C jacks. Use only FCC compliant line cords and jacks for these
connections.
FCC Information
C-1