Download Order Catalogue 2012
Transcript
5/8 Diagnostic & Software Characteristics The characteristic is described as concave, straight, convex or changing. Normal tracks show an anterior concave characteristic. anterior concave straight changing anterior concavity in the sagittal tracing for both sides mediotrusion right shown with straight characteristics left mediotrusion with changing characteristics from convex to concave) The differential diagnostics of joint track overlays have special importance in the evaluation of the characteristic. The illustration left shows the overlay of an open/close movement (blue), with a left mediotrusion track (green). Example of open/close and mediotrusion leftin an overlay display. The steep and extremely shortened opening track does not lie over the distinctly longer mediotrusion. An indication of anterior disk displacement of the left joint, with possible partial reduction. Symmetry Right-left comparison of quantity, angularity, quality and characteristic of symmetrical registrations (protrusion/retrusion and open/close). In symmetrical movements, no noticeable transversal movements take place. In the examination for symmetry, it has to be considered that the “symmetric” patient is not the norm. Thus, slight asymmetries are to be expected and considered “normal”. The evaluation of symmetry can only be carried out for open/close and protrusion/retrusion. The clearly comprehensible Gamma Dental Software displays allow for evaluation of functional symmetry according to graphic and numerical standards. symmetrical joint track sagittal asymmetry of track inclination sagittal asymmetry in quantity symmetrical joint track, protrusion protrusion with extreme differences in inclination clearly extended tracing of left joint transversal asymmetry sagittal and transversal asymmetry strong transversal asymmetry of a protrusion track, caused by occlusal interferences extreme right-left differences in open/close All prices in Euro, VAT and shipment not included. Please use the GAMMA-order form at the end of the catalogue. Tel.: +43/2243/34140-0, Fax: +43/2243/34140-90, [email protected] January 2012