Download Order Catalogue 2012

Transcript
5/8
Diagnostic & Software
Characteristics
The characteristic is described as concave, straight, convex or changing. Normal
tracks show an anterior concave characteristic.
anterior concave
straight
changing
anterior concavity in the sagittal tracing
for both sides
mediotrusion right shown with
straight characteristics
left mediotrusion with
changing characteristics
from convex to concave)
The differential diagnostics of joint track overlays have
special importance in the evaluation of the
characteristic. The illustration left shows the overlay of
an open/close movement (blue), with a left
mediotrusion track (green).
Example of open/close and
mediotrusion leftin an overlay display.
The steep and extremely shortened opening track does
not lie over the distinctly longer mediotrusion. An
indication of anterior disk displacement of the left joint,
with possible partial reduction.
Symmetry
Right-left comparison of quantity, angularity, quality and characteristic of symmetrical
registrations (protrusion/retrusion and open/close). In symmetrical movements, no noticeable
transversal movements take place.
In the examination for symmetry, it has to be considered that the “symmetric” patient is not
the norm. Thus, slight asymmetries are to be expected and considered “normal”. The
evaluation of symmetry can only be carried out for open/close and protrusion/retrusion.
The clearly comprehensible Gamma Dental Software displays allow for evaluation of
functional symmetry according to graphic and numerical standards.
symmetrical
joint track
sagittal asymmetry of
track inclination
sagittal asymmetry in
quantity
symmetrical joint track, protrusion
protrusion with extreme
differences in inclination
clearly extended tracing of
left joint
transversal
asymmetry
sagittal and transversal
asymmetry
strong transversal asymmetry of a
protrusion track, caused by occlusal
interferences
extreme right-left differences in
open/close
All prices in Euro, VAT and shipment not included. Please use the GAMMA-order form at the end of the catalogue.
Tel.: +43/2243/34140-0, Fax: +43/2243/34140-90, [email protected]
January 2012