Download DynomationTwoStroke

Transcript
board keys, while individual program screens are selected with the Function Keys, Escape Key, and SpaceBar
Key (rather than the mouse). While this older program interface may feel awkward at first, with a little practice,
you will soon become proficient and gain access to the powerful two-stroke technology offered by this waveaction simulation. Most users tell us that it only takes a day to become “comfortable” with the simulation.
Why Is The Program Still DOS?
The answer to that question is easy: cost!
While the interest in two-stroke engines is growing, the worldwide interest in a professional two-stroke
engine simulation is still limited. The cost to convert this program into a full Windows program (like our
Dynomation-5, four-stroke simulation) would prevent it from ever being released! So, the best alternative was
to update the program and modify the code to run INSIDE of Windows98 or WindowsXP. To complement the
release of DynomationTwoStroke, we produced this new User Guide and we offer Motion Software support for
new DynomationTwoStroke customers ([email protected]).
Welcome to DynomationTwoStroke. Please let us know what you think of this product. Send us your
ideas, critical analysis and how the program helped your engine development efforts. We really appreciate your
feedback!
DynomationTwoStroke In A Nutshell
DynomationTwoStroke is a full-cycle simulation, meaning that it calculates the complete fluid-dynamic,
thermodynamic, wave-dynamic, and frictional conditions that exist inside the cylinders and runners throughout
the entire 360 degrees of the two-cycle process. It keeps track of the pressure waves moving in the intake and
exhaust systems and their effects on port/pipe pressures and flow. The program performs hundreds of millions
of calculations at each rpm test point throughout the engine-analysis process. Despite internal program complexity, the simulation is straightforward and easy to use. You can count on DynomationTwoStroke to produce
solid, accurate predictions of engine performance characteristics.
DynomationTwoStroke can model a wide variety of two-stroke engines:
• Number of Cylinders: 1 to 3 (firing into joined chambers; unlimited firing into individual chambers)
• Engines with Piston-Port Induction, Reed-Valve Induction, and Rotary-Valve Induction
• Select Carbon Fiber, Fiberglass, and Steel Reeds
• Model Two to Six Transfer Ducts
• Exhaust Temp Can Be Calculated or Manually Entered
• Uses Sophisticated Combustion and Ignition Timing Modeling with BSFC Compensation
• Various Intake Tract Lengths and Sizes
• Exhaust Modeling With Individual or Shared Expansion Chambers
• And Much More!
Program Outputs and Graph Results:
• Power and Torque
• BSFC (Brake Specific Fuel Consumption)
• Pumping MEP (Mean Effective Pressure)
• Peak Cylinder Pressure
• Trapped Pressure Ratio
• Delivery Ratio (same a VE in a four-stroke engine)
• Trapping Efficiency
• Scavenging Efficiency (a measure of charge purity in the cylinder)
• Charging Efficiency
• Exhaust Temperature
• Piston Speed
• %EO to EC (percentage span through exhaust phase used for diagnosing Expansion Chambers)
DynomationTwoStroke -- Page